Enable SATA on Orange Pi 3B
beelze opened this issue · comments
My M.2 drive (sata, kingspec nt-256, tested working) is not detected.
@orangepi-xunlong wrote (#53) that "dts is set to nvme ssd by default, and if using sata ssd please add overlays=ssd-sata to /boot/orangepiEnv.txt" but this is a Orange Pi 5 recipe. How to do the same for Orange Pi 3B?
The only way I've found to enable SATA on Orange Pi 3B was
fdtfile=rockchip/rk3566-orangepi-3b-sata.dtb
in /boot/armbianEnv.txt
(Armbian 6.6.2-edge-rockchip64)