SmartLabs SML-5442TW
WallcroftUK opened this issue · comments
is it possible to install it on this devices to emmc ?
Send screenshots of the results of these three commands. There is currently no installation option for your device, you can add installation options according to your test situation.
cat /boot/uEnv.txt
cat /etc/flippy-openwrt-release
ls -l /boot/u-boot*
here
i have SML-5442TW openwrt installed on sdcard i must edit uENV.txt to set my dtd
meson-gxl-s905d-sml5442tw.dtb
and if i can ask you guys about one thing
if its possible to install k8s on device :D
the thing is only this version of armbian work for me i tried latest armbian older armbian and nothing and after try of this img it actually booted :D and works
and other thing wlan is not found no wifi even when this device have BT and Wifi
EDIT:
RTL8822CE
is on chip with BT and wifi
search: s905d-sml5442tw
Download the Armbian and OpenWrt systems separately, including the versions 5.15.y and 6.1.y, and perform tests on both.
Make sure that the dtb name in /boot/uEnv.txt is correct. Your main focus should be testing which u-boot is suitable for use in the 6.1.y version. If the default one fails to boot from USB, you can rename /boot/ u-boot-p201.bin, u-boot-p201.bin, and u-boot-n1.bin to u-boot.ext respectively for testing. Start by testing if USB booting works properly.
https://github.com/ophub/amlogic-s9xxx-armbian/releases/tag/Armbian_jammy_save_2023.06
https://github.com/ophub/amlogic-s9xxx-openwrt/releases/tag/OpenWrt_official_save_2023.06
I booted from sdcard and only working is your image of openwrt but if I wanted same way boot armbian it stuck at something
I just added the configuration of your device and built the firmware of this device, please download and test it.
search: s905d-sml5442tw
Where should I search ? Sorry for that question
found it :D
Post the screenshot of the newly downloaded 6.1.36 interface after startup.
cat /etc/ophub-release
ls -l /boot/u-boot*
Installation method: armbian-install, select 104
cat /boot/uEnv.txt
cat /etc/flippy-openwrt-release
ls -l /boot/u-boot*
Hi, can someone help me with boot Armbian on SML-5442TW? Im not able to boot it from sd card... always boot into stock firmware.