Tanix Tx9 Pro 2G_16G (S912)可以使用
rainups opened this issue · comments
Standard chat template, no routine, no chat.
标准聊天模板，无套路不聊天。
Device Information | 设备信息
- SOC: [S912]
- Model [Tanix TX9Pro_2G_16G]
Armbian Version | 系统版本
- Kernel Version: [5.10.154]
- Release: [bullseye]
Describe the bug | 问题描述
Describe the problem in detail and attach screenshots if necessary.
详细描述问题，并在必要时附上屏幕截图。
它是个低配的Tanix TX9pro 2G RAM,16G ROM,100Mb Nic 电视盒子
用的是Armbian_22.11.0_Aml_s912_bullseye_5.10.154_server_2022.11.16.img，配合meson-gxm-tx9-pro.dtb
存在有线LAN和无线WIFI不工作问题。
它与常规的Tanix TX9pro 3G RAM,32G ROM,1000Mb Nic 很接近，我尝试用最接近的meson-gxm-q201.dtb 有线LAN也不能工作，
但它比meson-gxm-tx9-pro.dtb在ifconfig里能看到MAC地址，但没IP地址。
在老版本的 Armbian_20.10_Aml-s9xxx_buster_5.4.108-flippy-56+o 固件里有线是可以工作，无线WIFI另行打补丁也是工作的(用rtl8189es驱动）。
2个硬件PCB版本图片：CS_912_TX92_LP_V1.0 20170810 和 CS_912_TX92_B8_V1.1 20190811
https://discourse.coreelec.org/uploads/default/original/2X/9/94b02f9dbab4377de9a1458103369790ec75e546.jpeg
**meson-gxm-tx9-pro.dtb**
[ OK ] Finished Permit User Sessions.
Starting Hostname Service...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Started chrony, an NTP client/server.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Started Periodic ext4 Online Metadata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Daily man-db regeneration.
[ OK ] Started Run system activity accounting tool every 10 minutes.
[ OK ] Started Generate summary of yesterday's process accounting.
[ OK ] Reached target Timers.
[ OK ] Started LSB: set CPUFreq kernel parameters.
Starting LSB: Set sysfs variables from /etc/sysfs.conf...
[ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
[ OK ] Started Hostname Service.
Starting Network Manager Script Dispatcher Service...
[ OK ] Started Network Manager Script Dispatcher Service.
[ 20.107229] Bluetooth: hci0: BCM: failed to write update baudrate (-110)
[ 20.112620] Bluetooth: hci0: Failed to set baudrate
[ 20.137498] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [Generic PHY] (irq=POLL)
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 21.893871] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
[ 21.907198] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 21.923262] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
[ OK ] Started Dispatcher daemon for systemd-networkd.
[ 22.240540] Bluetooth: hci0: command 0x0c03 tx timeout
[ 22.260751] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [Generic PHY] (irq=POLL)
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[ 24.013886] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
[ 24.013900] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 24.013908] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 24.274106] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [Generic PHY] (irq=POLL)
[ 26.023858] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
[ 26.038432] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 26.055764] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[ 26.327527] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [Generic PHY] (irq=POLL)
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 28.077193] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
[ 28.092148] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 28.109825] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
[ 28.384102] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [Generic PHY] (irq=POLL)
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 30.133893] Bluetooth: hci0: BCM: Reset failed (-110)
[ 30.133901] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
[ 30.133922] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 30.182353] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
[ OK ] Finished Network Manager Wait Online.
[ OK ] Reached target Network is Online.
Starting /etc/rc.local Compatibility...
[ 30.516151] rc.local[1700]: irq name:xhci-hcd:usb1, irq:43, affinity: 4
[ 30.576311] rc.local[1706]: irq name:xhci-hcd:usb1, irq:43, affinity: 4
[ OK ] Started /etc/rc.local Compatibility.
Starting Hold until boot process finishes up...
Starting Terminate Plymouth Boot Screen...
Armbian 22.11.0-trunk Bullseye ttyAML0
armbian login:
[ 330.200705] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [Generic PHY] (irq=POLL)
[ 331.947136] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
[ 331.963376] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 331.982389] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
[ 332.250678] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [Generic PHY] (irq=POLL)
[ 334.000481] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
[ 334.016945] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 334.036120] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
[ 334.304041] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [Generic PHY] (irq=POLL)
[ 336.050477] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
[ 336.066954] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 336.086147] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
[ 336.354019] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [Generic PHY] (irq=POLL)
[ 338.103814] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
[ 338.120246] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 338.139424] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
**meson-gxm-q201.dtb**
[ OK ] Started Network Manager.
[ OK ] Reached target Network.
Starting Network Manager Wait Online...
Starting chrony, an NTP client/server...
Starting Access point and authentication server for Wi-Fi and Ethernet...
Starting OpenVPN service...
Starting Notify NFS peers of a restart...
Starting Permit User Sessions...
[ OK ] Started Unattended Upgrades Shutdown.
[ OK ] Started vnStat network traffic monitor.
[ OK ] Finished OpenVPN service.
[ OK ] Finished Permit User Sessions.
[ OK ] Started LSB: set CPUFreq kernel parameters.
Starting LSB: Set sysfs variables from /etc/sysfs.conf...
Starting Hostname Service...
[ OK ] Started Notify NFS peers of a restart.
[ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Started chrony, an NTP client/server.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Started Periodic ext4 Online Metadata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Daily man-db regeneration.
[ OK ] Started Run system activity accounting tool every 10 minutes.
[ OK ] Started Generate summary of yesterday's process accounting.
[ OK ] Reached target Timers.
[ OK ] Started Hostname Service.
Starting Network Manager Script Dispatcher Service...
[ OK ] Started Network Manager Script Dispatcher Service.
[ 20.444614] meson8b-dwmac c9410000.ethernet eth0: PHY [0.e40908ff:08] driver [Meson GXL Internal PHY] (irq=43)
[ 21.988071] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
[ 22.001650] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
[ 22.015608] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rmii link mode
[ OK ] Started Dispatcher daemon for systemd-networkd.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 22.821684] r8712u 1-1:1.0 wlan0: 1 RCR=0x153f00e
[ 22.827324] r8712u 1-1:1.0 wlan0: 2 RCR=0x553f00e
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 31.456857] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 31.465249] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.234411] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 33.805361] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 34.583056] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 36.153972] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 36.931670] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 38.502647] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 39.280235] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 40.851153] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 41.628814] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 54.963716] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 55.741315] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 57.375147] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 58.152778] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 59.723736] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 60.501417] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 62.072416] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 62.849956] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 64.420921] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 65.198607] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ OK ] Stopped Access point and authentication server for Wi-Fi and Ethernet.
Starting Access point and authentication server for Wi-Fi and Ethernet...
[FAILED] Failed to start Access point and authentication server for Wi-Fi and Ethernet.
See 'systemctl status hostapd.service' for details.
[ 78.512523] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 79.290108] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[FAILED] Failed to start Network Manager Wait Online.
See 'systemctl status NetworkManager-wait-online.service' for details.
[ OK ] Reached target Network is Online.
Starting /etc/rc.local Compatibility...
[ 80.053255] rc.local[1744]: irq name:eth0, irq:29, affinity: 8
[ 80.054228] rc.local[1744]: irq name:xhci-hcd:usb1, irq:42, affinity: 4
[ 80.068569] rc.local[1744]: Set the rps cpu mask of eth0 to 0xf3
[ 80.115062] rc.local[1750]: irq name:eth0, irq:29, affinity: 8
[ 80.115620] rc.local[1750]: irq name:xhci-hcd:usb1, irq:42, affinity: 4
[ 80.116167] rc.local[1750]: Set the rps cpu mask of eth0 to 0xf3
[ OK ] Started /etc/rc.local Compatibility.
Starting Hold until boot process finishes up...
Starting Terminate Plymouth Boot Screen...
[ 80.861057] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
Armbian 22.11.0-trunk Bullseye ttyAML0
armbian login: [ 81.638717] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 83.209617] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 83.987226] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 85.558144] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 86.335876] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 87.906740] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 88.684413] meson8b-dwmac c9410000.ethernet eth0: Link is Down
armbian login: root
Password: [ 101.998327] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 102.775962] meson8b-dwmac c9410000.ethernet eth0: Link is Down
_ _ ____ ___ _ ____
/ \ _ __ ___ | | / ___|/ _ \/ |___ \
/ _ \ | '_ ` _ \| | \___ \ (_) | | __) |
/ ___ \| | | | | | | ___) \__, | |/ __/
/_/ \_\_| |_| |_|_| |____/ /_/|_|_____|
Welcome to Armbian 22.11.0-trunk Bullseye with Linux 5.10.154-ophub
No end-user support: built from trunk
System load: 11% Up time: 1 min
Memory usage: 7% of 1.88G IP:
CPU temp: 64°C Usage of /: 54% of 2.4G
RX today: n/a
[ General system configuration (beta): armbian-config ]
Last login: Wed Nov 16 13:01:22 HKT 2022 on ttyAML0
root@armbian:~# [ 104.346753] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 105.124596] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 106.695449] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 107.473175] meson8b-dwmac c9410000.ethernet eth0: Link is Down
ifconfig
eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet6 fe80::ae08:e1fd:16c0:4059 prefixlen 64 scopeid 0x20<link>
ether de:f1:ae:d4:73:07 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 90 bytes 10647 (10.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 29
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 24 bytes 1944 (1.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 24 bytes 1944 (1.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
root@armbian:~# [ 111.392650] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 112.170348] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 125.484312] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 126.261905] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 127.832859] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 128.610458] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 130.181550] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 130.959054] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 132.530086] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 133.307587] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 134.878567] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 135.656247] meson8b-dwmac c9410000.ethernet eth0: Link is Down
从原厂固件提取的:dts
TX9Pro_2G_16G_android7.txt
未知设备用5.15的固件试。只要dtb对就能用，你用5.10的试，受u-boot影响
5.10的s912有3个u-boot，你用的是章鱼星球的，试试u-boot-s905x-s912.bin和u-boot-p212.bin
cd /boot
cp -f u-boot-s905x-s912.bin u-boot.ext
sync && reboot
换成5.15好像变化不大：
Armbian_22.11.0_Aml_s912_bullseye_5.15.78_server_2022.11.16.img
u-boot-s905x-s912.bin 复制到 u-boot.ext
uEnv.txt 改为 meson-gxm-tx9-pro.dtb
extlinux.conf 改为 meson-gxm-tx9-pro.dtb
同时对比3G_32G的dtb是有点区别，不知有没有关系：
目前能查到的是：
2G_16G版是100M有线LAN,无线WIFI是RTL8189ETV
3G_32G版是1000M有线LAN,无线WIFI是QCA9377
Armbian_22.11.0_Aml_s912_bullseye_5.15.78_server_2022.11.16.img
u-boot-s905x-s912.bin 复制到 u-boot.ext
uEnv.txt 改为 meson-gxm-tx9-pro-2g.dtb
extlinux.conf 这个文件不需要，删除它或者保持原来的.bak后缀不要改
按你要求附上TTL记录，HDMI显示好像在找tftp服务。
20221129A_TTL_log.txt
这已经正确获取到IP了
5.15不要复制u-boot.ext，删了，只改dtb重启
Armbian_22.11.0_Aml_s912_bullseye_5.15.78_server_2022.11.16.img
u-boot.ext 不需要，删除
uEnv.txt 改为 meson-gxm-tx9-pro-2g.dtb
extlinux.conf 这个文件不需要，删除它或者保持原来的.bak后缀不要改
还是没IP, 这个盒子变过砖，重新救砖后原机MAC和SN丢失，是否有关系？ TTL记录:
20221129D_TTL_log.txt
刚才有u-boot的时候还分配到了IP，看来还是需要u-boot引导，你现在是在USB里运行的？
加了u-boot会无法启动吗？
u-boot-p212.bin
u-boot-zyxq.bin
USB复制这2个为u-boot.ext试试能启动不，先在USB测试，不要写入emmc
一直是用64G TF卡测试的：
Armbian_22.11.0_Aml_s912_bullseye_5.15.78_server_2022.11.16.img 写入64G TF卡
u-boot-p212.bin 复制到 u-boot.ext
uEnv.txt 改为 meson-gxm-tx9-pro-2g.dtb
extlinux.conf 这个文件不需要，删除它或者保持原来的.bak后缀不要改
20221129E_TTL_log_u-boot-p212.bin.txt
Armbian_22.11.0_Aml_s912_bullseye_5.15.78_server_2022.11.16.img 写入64G TF卡
u-boot-zyxq.bin 复制到 u-boot.ext
uEnv.txt 改为 meson-gxm-tx9-pro-2g.dtb
extlinux.conf 这个文件不需要，删除它或者保持原来的.bak后缀不要改
20221129F_TTL_log_u-boot-zyxq.bin.txt
zyxq可以排除了。
u-boot-p212.bin
meson-gxm-q201.dtb
这2个组合看看
在你有图片的那个帖子，启动已经获得IP了，后面不启动了？
图片是进到一个tftp里，把我的路由当服务。不知啥原因；
Armbian_22.11.0_Aml_s912_bullseye_5.15.78_server_2022.11.16.img 写入64G TF卡
u-boot-p212.bin 复制到 u-boot.ext
uEnv.txt 改为 meson-gxm-q201.dtb
extlinux.conf 这个文件不需要，删除它或者保持原来的.bak后缀不要改
这个组合有IP啦，之前在5.10里我也试过这样的组合，没成功，可能是我连extlinux.conf一起改的原因。
十分感谢大佬，辛苦啦！
你再试试5.15不要u-boot行不行（u-boot能不用就不要用，目前只发现s905l3a必须用）
删除u-boot.ext，只把uEnv.txt 改为 meson-gxm-q201.dtb
重启试试
Armbian_22.11.0_Aml_s912_bullseye_5.15.78_server_2022.11.16.img 写入64G TF卡
u-boot.ext 这个文件不需要，删除它
uEnv.txt 改为 meson-gxm-q201.dtb
extlinux.conf 这个文件不需要，删除它或者保持原来的.bak后缀不要改
也可以，IP变了，它自动识别u-boot里的MAC地址了，再次感谢！
每个盒子总是因为有你这样的恭献者，经过不断尝试、不断开发、不断改进，愿意分享自己的成果，才给后来的使用者打开了一个新世界。
感谢你不厌其烦地测试，终于找出了合适的配置。我一会在配置文件里加一条
meson-gxm-q201.dtb
u-boot-p212.bin
meson-gxm-q201.dtb
u-boot-p212.bin
h96 pro plus
soc: s912
ram: 3GB
- 测试使用5.15 不要修改任何东西即可启动，但是启动蓝牙需要改成mod.dtb，缺点ram只识别为2GB。
- 5.10 uboot需要修改为u-boot-p212.bin，ram正常识别为3GB。
- 6.0 测试的比较早，直接启动失败之后就没有再测试，应该和5.10一样需要修改uboot.
- 写入emmc前几次启动ok，后面几次就会失败，估计是emmc存在坏块了。android系统下倒是正常使用。
好的，感谢分享