Giters

ophub / amlogic-s9xxx-armbian

Support for Armbian in Amlogic, Rockchip and Allwinner boxes. Support a311d, s922x, s905x3, s905x2, s912, s905d, s905x, s905w, s905, s905l, rk3588, rk3568, rk3399, rk3328, h6, etc.

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

rock5b启动失败

bigmangos opened this issue · comments

commented

Standard chat template, no routine, no chat.
标准聊天模板，无套路不聊天。

Device Information | 设备信息

  • SOC: rk3588
  • Model rock5b

Armbian Version | 系统版本

  • Kernel Version: 5.10.153
  • Release: Armbian_23.05.0_rockchip_rock5b_bullseye_5.10.153_server_2023.04.01.img.gz

Describe the bug | 问题描述
Describe the problem in detail and attach screenshots if necessary.
详细描述问题，并在必要时附上屏幕截图。

NVME启动，然后绿灯和蓝灯同时常亮，连不上网络进不去系统。
打印日志如下：

[2023-04-02 11:06:43.868] DDR Version V1.07 20220412
[2023-04-02 11:06:43.977] LPDDR4X, 2112MHz
[2023-04-02 11:06:43.977] channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
[2023-04-02 11:06:43.977] channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
[2023-04-02 11:06:43.977] channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
[2023-04-02 11:06:43.977] channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
[2023-04-02 11:06:43.977] change to F1: 528MHz
[2023-04-02 11:06:43.977] change to F2: 1068MHz
[2023-04-02 11:06:44.071] change to F3: 1560MHz
[2023-04-02 11:06:44.102] change to F0: 2112MHz
[2023-04-02 11:06:44.134] out
[2023-04-02 11:06:44.712] INFO:    Preloader serial: 2
[2023-04-02 11:06:44.716] NOTICE:  BL31: v2.3():v2.3-371-g07caf6d56:derrick.huang
[2023-04-02 11:06:44.716] NOTICE:  BL31: Built : 12:33:59, May 30 2022
[2023-04-02 11:06:44.716] INFO:    ext 32k is not valid
[2023-04-02 11:06:44.716] INFO:    GICv3 without legacy support detected.
[2023-04-02 11:06:44.716] INFO:    ARM GICv3 driver initialized in EL3
[2023-04-02 11:06:44.716] INFO:    system boots from cpu-hwid-0
[2023-04-02 11:06:44.716] INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
[2023-04-02 11:06:44.716] INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
[2023-04-02 11:06:44.716] INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
[2023-04-02 11:06:44.716] INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
[2023-04-02 11:06:44.716] INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
[2023-04-02 11:06:44.716] INFO:    BL31: Initialising Exception Handling Framework
[2023-04-02 11:06:44.716] INFO:    BL31: Initializing runtime services
[2023-04-02 11:06:44.716] WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
[2023-04-02 11:06:44.716] ERROR:   Error initializing runtime service opteed_fast
[2023-04-02 11:06:44.716] INFO:    BL31: Preparing for EL3 exit to normal world
[2023-04-02 11:06:44.716] INFO:    Entry point address = 0x200000
[2023-04-02 11:06:44.716] INFO:    SPSR = 0x3c9

换官网Armbian系统正常。
Armbian_23.02.0-trunk.0254_Rock-5b_jammy_legacy_5.10.110_minimal.img.xz

[2023-04-02 14:29:04.039] DDR Version V1.07 20220412
[2023-04-02 14:29:04.149] LPDDR4X, 2112MHz
[2023-04-02 14:29:04.149] channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
[2023-04-02 14:29:04.164] channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
[2023-04-02 14:29:04.164] channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
[2023-04-02 14:29:04.164] channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
[2023-04-02 14:29:04.164] change to F1: 528MHz
[2023-04-02 14:29:04.196] change to F2: 1068MHz
[2023-04-02 14:29:04.259] change to F3: 1560MHz
[2023-04-02 14:29:04.290] change to F0: 2112MHz
[2023-04-02 14:29:04.321] out
[2023-04-02 14:29:04.899] INFO:    Preloader serial: 2
[2023-04-02 14:29:04.899] NOTICE:  BL31: v2.3():v2.3-371-g07caf6d56:derrick.huang
[2023-04-02 14:29:04.899] NOTICE:  BL31: Built : 12:33:59, May 30 2022
[2023-04-02 14:29:04.899] INFO:    ext 32k is not valid
[2023-04-02 14:29:04.899] INFO:    GICv3 without legacy support detected.
[2023-04-02 14:29:04.899] INFO:    ARM GICv3 driver initialized in EL3
[2023-04-02 14:29:04.899] INFO:    system boots from cpu-hwid-0
[2023-04-02 14:29:04.899] INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
[2023-04-02 14:29:04.899] INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
[2023-04-02 14:29:04.899] INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
[2023-04-02 14:29:04.899] INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
[2023-04-02 14:29:04.899] INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
[2023-04-02 14:29:04.899] INFO:    BL31: Initialising Exception Handling Framework
[2023-04-02 14:29:04.899] INFO:    BL31: Initializing runtime services
[2023-04-02 14:29:04.899] WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
[2023-04-02 14:29:04.899] ERROR:   Error initializing runtime service opteed_fast
[2023-04-02 14:29:04.899] INFO:    BL31: Preparing for EL3 exit to normal world
[2023-04-02 14:29:04.899] INFO:    Entry point address = 0x200000
[2023-04-02 14:29:04.899] INFO:    SPSR = 0x3c9
[2023-04-02 14:29:11.462] �[2J�[3J�[-1;-1fdone.
[2023-04-02 14:29:11.462] 
[2023-04-02 14:29:11.462] Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
[2023-04-02 14:29:11.462] 
[2023-04-02 14:29:11.524] Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
[2023-04-02 14:29:11.524] 
[2023-04-02 14:29:11.540] done.
[2023-04-02 14:29:11.540] 
[2023-04-02 14:29:11.555] Begin: Will now check root file system ... fsck from util-linux 2.37.2
[2023-04-02 14:29:11.555] 
[2023-04-02 14:29:11.571] [/usr/sbin/fsck.ext4 (1) -- /dev/nvme0n1p2] fsck.ext4 -a -C0 /dev/nvme0n1p2 
[2023-04-02 14:29:11.571] 
[2023-04-02 14:29:11.571] armbi_root: clean, 51282/120720 files, 361794/482299 blocks
[2023-04-02 14:29:11.571] 
[2023-04-02 14:29:11.587] done.
[2023-04-02 14:29:11.587] 
[2023-04-02 14:29:11.587] done.
[2023-04-02 14:29:11.587] 
[2023-04-02 14:29:11.587] Begin: Running /scripts/local-bottom ... done.
[2023-04-02 14:29:11.587] 
[2023-04-02 14:29:11.649] Begin: Running /scripts/init-bottom ... done.
[2023-04-02 14:29:11.649] 
[2023-04-02 14:29:11.915] 
[2023-04-02 14:29:11.915] 
[2023-04-02 14:29:11.915] Welcome to �[1mArmbian 23.02.0-trunk.0252 Jammy�[0m!
[2023-04-02 14:29:11.915]
commented

我的rock5b用的是这里下载的，spi必须刷我仓库里的，刷官方的不行。我是从tf卡启动后dd镜像到nvme的。

电源使用30 W以上的，我之前使用ipad的20 w电源时只能拔电重插启动，reboot不行。我正好昨天买了官方30 w的电源测试了一下可以正常reboot了。

IMG_2462

commented

我刷的armbian的spi，官方的spi启动不了armbian，请问下大佬的spi和官方armbian的不一样吗？
关于供电，我现在是用诱骗直接18V，官方armbian可以启动，boot和官方有什么不同吗？

commented

我用了半年了，一直不能正常reboot，执行完了要等5分钟才能启动，之前换过一个第三方的20w的也不行，周五我问了下TB客服，他说功率不够，要30W以上才可以，我周五下单的官方70块的那个黑色的电源，昨天周六到了我换上reboot了很多次都顺利快速启动了，所以NVME可能真的是需要30W以上。使用tf或者emmc的使用18w的也可以，我ipad电源是20w的使用tf卡也可以。

我的这个spi是f大在5b刚上市那会开发的，增加了一些特殊优化。我大概2周也测试过换成官方为armbian开发的spi，结果无法启动，又换回了这个f大开发的。

我昨天刚新刷了rock5b

Snip20230402_7