bme280
A rust device driver for the Bosch BME280 temperature, humidity, and atmospheric pressure sensor and the Bosch BMP280 temperature and atmospheric pressure sensor.
Usage
use linux_embedded_hal as hal;
use linux_embedded_hal::{Delay, I2cdev};
use bme280::i2c::BME280;
// using Linux I2C Bus #1 in this example
let i2c_bus = I2cdev::new("/dev/i2c-1").unwrap();
let mut delay = /* ..delay provider */
// initialize the BME280 using the primary I2C address 0x76
let mut bme280 = BME280::new_primary(i2c_bus);
// or, initialize the BME280 using the secondary I2C address 0x77
// let mut bme280 = BME280::new_secondary(i2c_bus);
// or, initialize the BME280 using a custom I2C address
// let bme280_i2c_addr = 0x88;
// let mut bme280 = BME280::new(i2c_bus, bme280_i2c_addr);
// initialize the sensor
bme280.init(&mut delay).unwrap();
// measure temperature, pressure, and humidity
let measurements = bme280.measure(&mut delay).unwrap();
println!("Relative Humidity = {}%", measurements.humidity);
println!("Temperature = {} deg C", measurements.temperature);
println!("Pressure = {} pascals", measurements.pressure);Serde Support
To enable optional serde serialization support for the measurements struct, simply enable the serde feature, like so in Cargo.toml:
[dependencies]
bme280 = { version = "0.2", features = ["serde"] }License
Licensed under either of:
- Apache License, Version 2.0, (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Contribution
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.