Giters
notthetup
/
draw
Power and Current Draw meter
Geek Repo:
Geek Repo
Github PK Tool:
Github PK Tool
Stargazers:
2
Watchers:
4
Issues:
12
Forks:
1
notthetup/draw Issues
Update I2C Resistor Values
Closed
4 years ago
Move to a through hole USB adapter
Closed
5 years ago
Comments count
1
Add a button to enter bootloader
Closed
5 years ago
Add tomu dfu support by exposing PC1 and PE12 pins on to pads allow shorting.
Updated
5 years ago
Mark max 36V on PCB
Updated
6 years ago
Fix button footprint
Updated
7 years ago
Comments count
2
Remove mounting holes for rubber feet
Updated
7 years ago
Fix LEUART TX/RX pins.
Updated
7 years ago
Update SWD Header to conform to STLink standard.
Updated
7 years ago
Comments count
1
Remove keepout for high current connectors
Closed
7 years ago
Comments count
1
Add a 5V pin to UART header to power the module through UART
Updated
7 years ago
Add decoupling capacitors as explained in app note
Updated
7 years ago