This is a Pytorch implementation of Microsoft's text-to-speech system FastSpeech 2: Fast and High-Quality End-to-End Text to Speech. This project is based on xcmyz's implementation of FastSpeech. Feel free to use/modify the code. Any suggestion for improvement is appreciated.
This repository contains only FastSpeech 2 but FastSpeech 2s so far. I will update it once I reproduce FastSpeech 2s, the end-to-end version of FastSpeech2, successfully.
Audio samples generated by this implementation can be found here.
- The model used to generate these samples is trained for 300k steps on LJSpeech dataset.
- Audio samples are converted from mel-spectrogram to raw waveform via NVIDIA's pretrained WaveGlow and seungwonpark's pretrained MelGAN.
You can install the python dependencies with
pip3 install -r requirements.txt
Noticeably, because I use a new functionality torch.bucketize, which is only supported in PyTorch 1.6, you have to install the nightly build by
pip3 install --pre torch==1.6.0.dev20200428 -f https://download.pytorch.org/whl/nightly/cu102/torch_nightly.html
Since PyTorch 1.6 is still unstable, it is suggested that Python virtual environment should be used.
You have to download our FastSpeech2 pretrained model and put it in the ckpt/LJSpeech/ directory.
Your can run
python3 synthesis.py --step 300000
to generate any utterances you wish to. The generated utterances will be put in the results/ directory.
Here is a generated spectrogram of the sentence "Printing, in the only sense with which we are at present concerned, differs from most if not from all the arts and crafts represented in the Exhibition"
For CPU inference please refer to this colab tutorial. One has to clone the original repo of MelGAN instead of using torch.hub due to the code architecture of MelGAN.
This project supports two datasets:
- LJSpeech: consisting of 13100 short audio clips of a single female speaker reading passages from 7 non-fiction books, approximately 24 hours in total.
- Blizzard2013: a female speaker reading 10 audio books. The prosody variance are greater than the LJSpeech dataset. Only the 9741 segmented utterances are used in this project.
After downloading the dataset, extract the compressed files, you have to modify the hp.data_path and some other parameters in hparams.py. Default parameters are for the LJSpeech dataset.
As described in the paper, Montreal Forced Aligner(MFA) is used to obtain the alignments between the utterances and the phoneme sequences. Alignments for the LJSpeech dataset is provided here. You have to put the TextGrid.zip file in your hp.preprocessed_path/ and extract the files before you continue.
After that, run the preprocessing script by
python3 preprocess.py
Alternately, you can align the corpus by yourself. First, download the MFA package and the pretrained lexicon file. (We use LibriSpeech lexicon instead of the G2p_en python package proposed in the paper)
wget https://github.com/MontrealCorpusTools/Montreal-Forced-Aligner/releases/download/v1.1.0-beta.2/montreal-forced-aligner_linux.tar.gz
tar -zxvf montreal-forced-aligner_linux.tar.gz
wget http://www.openslr.org/resources/11/librispeech-lexicon.txt -O montreal-forced-aligner/pretrained_models/librispeech-lexicon.txt
Then prepare some necessary files required by the MFA.
python3 prepare_align.py
Running MFA and put the .TextGrid files in your hp.preprocessed_path.
# Replace $DATA_PATH and $PREPROCESSED_PATH with ./LJSpeech-1.1/wavs and ./preprocessed/LJSpeech/TextGrid, for example
./montreal-forced-aligner/bin/mfa_align $YOUR_DATA_PATH montreal-forced-aligner/pretrained_models/librispeech-lexicon.txt english $YOUR_PREPROCESSED_PATH -j 8
Remember to run the preprocessing script.
python3 preprocess.py
After preprocessing, you will get a stat.txt file in your hp.preprocessed_path/, recording the maximum and minimum values of the fundamental frequency and energy values throughout the entire corpus. You have to modify the f0 and energy parameters in the hparams.py according to the content of stat.txt.
Train your model with
python3 train.py
The model takes less than 10k steps (less than 1 hour on my GTX1080 GPU) of training to generate audio samples with acceptable quality, which is much more efficient than the autoregressive models such as Tacotron2.
There might be some room for improvement for this repository. For example, I just simply add up the duration loss, f0 loss, energy loss and mel loss without any weighting.
The TensorBoard loggers are stored in the log/hp.dataset/ directory. Use
tensorboard --logdir log/hp.dataset/
to serve the TensorBoard on your localhost. Here is an example training the model on LJSpeech for 400k steps.
There are several differences between my implementation and the paper.
- The paper includes punctuations in the transcripts. However, MFA discards puntuations by default and I haven't found a way to solve it. During inference, I replace all puntuations with the
sp(short-pause) phone labels. - Following xcmyz's implementation, I use an additional Tacotron-2-styled postnet after the FastSpeech decoder, which is not used in the original paper.
- The transformer paper suggests to use dropout after the input and positional embedding. I find that this trick does not make any observable difference so I do not use dropout for potitional embedding.
- The paper suggest to use L1 loss for mel loss and L2 loss for variance predictor losses. But I find it easier to train the model with L2 mel loss and L1 variance adaptor losses, for unknown reason.
- I use gradient clipping in the training.
Some tips for training this model.
- You can set the
hp.acc_stepsparemeter if you wish to train with a large batchsize on a GPU with limited memory. - In my experience, carefully masking out the padded parts in loss computation and in model forward parts can largely improve the performance.
Please inform me if you find any mistake in this repo, or any useful tip to train the FastSpeech2 model.
- Try different weights for the loss terms.
- Evaluate the quality of the synthesized audio over the validation set.
- Multi-speaker or transfer learning experiment.
- Implement FastSpeech 2s.
- FastSpeech 2: Fast and High-Quality End-to-End Text to Speech, Y. Ren, et al.
- FastSpeech: Fast, Robust and Controllable Text to Speech, Y. Ren, et al.
- xcmyz's FastSpeech implementation
- rishikksh20's FastSpeech2 implementation
- TensorSpeech's FastSpeech2 implementation
- NVIDIA's WaveGlow implementation
- seungwonpark's MelGAN implementation