nicsure / QuanshengDock

Allows the Quansheng UV-K5 radio to be controlled by a PC.

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

[BUG] XVFO - VOX goes ON and OFF

ErikS-web opened this issue · comments

Release 0.32.20q (and also source 21)

When VOX is enabled

VOX on goes TX for 1 second RX for 1 second and repeats. Even if the GAIN is LOW

Not for me it doesn't. Please supply all settings you have related to VOX and microphone levels.

It's tricky. Had a XM5 mic+headphone on and connected via BT to PC.

Sensitivity at approx 28.7.
Will do some test next week.

I've been testing this and as long as the microphone level is correctly applied, it works fine for me.

Can not reproduce the error. Closing issue

The mic boost has no effect on VOX, the config to change VOX sensitivity is in settings.

Ahhh lower than 28 then got it thanks

And tested works fine and my audio was good had report from G0WCO on GB3NR testing VOX my setting was 24.10 works well logitec web cam for mic.

Yeah it can take a bit of experimentation with the sensitivity to get it right. Different mics and levels etc.. Glad you got it working.