Intro_to_GWAS
An introductory workshop to GWAS analysis using PLINK
and R
.
Overview
In this workshop we will explore the basics of performing Genome-wide Association Studies (GWAS) using a combination of the software plink
(http://pngu.mgh.harvard.edu/~purcell/plink/) and R
(http://www.r-project.org/).
At a later stage (a separate workshop) we will also introduce the GenABEL
package which offers additional functionality of genomic association analyses in R.
This workshop is written to be accessible to a range of people, from those that have never performed any command-line work, to those that just want a refresher. As such I have written it to include clear and straight forward outlines of all R
and plink
operations, most of the time stepping through these one line at at time.
Workshop Manual
The workshop manual is available in the form of the GWAS_workshop.pdf
file. This contains all the information and code to run through the entire workshop, as well as hopefully helpful information.
Before You Begin!!
[Please read and follow along carefully]
There are certain steps that are Operating System dependent that need to be performed before starting the workshop. I have tried to cover them off here in as much detail as required.
Obviously before proceeding you need to ensure that you have both R and RStudio installed on your system.
Windows
Before starting the workshop you'll need to have the ability to build certain R packages from source. This requires special libraries, which most of the time aren't installed by default. To begin building R packages for Windows you'll need to install RTools.
The most recent version can be found here: http://cran.us.r-project.org/bin/windows/Rtools/
The current release is RTools33. It's as simple as downloading and installing, just follow the prompts.
Once RTools is installed you should be able to proceed with the workshop.
Mac (OS X)
The initial set up for Mac is a little more detailed, but should be fairly straight forward and once it's done you don't have to worry about it again.
Command Line Tools
To build R packages from source Macs require command line tools
to be installed. To do this:
- Launch the Terminal, found in /Applications/Utilities/
- Type the following command string:
xcode-select --install
- Follow the prompts
Additional R libraries for package building on OS X
You will also need to install both additional libraries from here: https://cran.r-project.org/bin/macosx/tools/
If you are running OS X 10.5 or higher you'll want to download and install the following:
- gfortran - https://cran.r-project.org/bin/macosx/tools/gfortran-4.2.3.pkg
- tcltk - https://cran.r-project.org/bin/macosx/tools/tcltk-8.5.5-x11.pkg
... and then gfortran version from here (there are also a large list of optional packages for Mac here): http://r.research.att.com/libs/
Again, for OS X 10.5 or higher download and install the following:
- gfortran - http://r.research.att.com/libs/gfortran-4.8.2-darwin13.tar.bz2
- this needs to be extracted and installed in the correct location. You can do this by running the following code in the terminal:
sudo tar fvxz gfortran-4.8.2-darwin13.tar.bz2 -C /
... or, if you prefer, everything from the terminal:
curl -O http://r.research.att.com/libs/gfortran-4.8.2-darwin13.tar.bz2
sudo tar fvxz gfortran-4.8.2-darwin13.tar.bz2 -C /
Once you've performed the above steps you're ready to move on.
Linux
If you are running Linux I'm assuming that you have your own working set up that you're happy with, so you don't need me to guide the way. If you're new to Linux you'll be pleasantly surprised to find that most popular distro's have the required libraries for building R and it's packages from source already installed. If you do have issues there is plenty of excellent documentation:
- R FAQ: https://cran.r-project.org/doc/FAQ/R-FAQ.html
- R Installation and Admin: https://cran.r-project.org/doc/manuals/r-release/R-admin.html
If you are completely in the woods, a good place to start is by installing the libraries that R is built from (these are the things you'll want installed if you are compiling R from source).
sudo apt-get install r-base-dev
Required Files and Steps for Getting Started
All files required for this workshop are contained within this repository.
Set up
- Either clone into this repository or download via the 'Download ZIP' button to the right, then start
RStudio
and ensure this repository is set as your working directory. - In
R
run the following:source('scripts/GWAS_workshop_setup.R')
. TheGWAS_workshop_setup.R
script is provided to automatically: - extract the example data toexample/
- download OS specific version ofplink
- extractplink
binary tobin/
- download, build, install and load all R packages you'll need- Note: if you encounter any errors at this stage try restarting RStudio and running
source('scripts/GWAS_workshop_setup.R')
again.
- Note: if you encounter any errors at this stage try restarting RStudio and running
- Once you have performed the above you should be able to follow along with the workshop manual.
Happy GWASing!
- Miles