Whenever I click install for ViGEm bus driver,a dialogbox pops up which says do you want to cancel installation. I am pressing install button but it shows cancel installation. If I press no then there's no progress and if I click yes then it says installation interrupted.
opened this issue · comments
README first
Before you report issues with the setup, make sure to check the following things first:
- Are you on anything older than Windows 10? Windows XP/Vista/7/8/8.1 are not supported so don't report this as an issue, it is intentional.
- Have you chosen the right setup for your CPU architecture?
- You can not mix these, make sure to download and run the correct setup.
- ARM/ARM64 is not supported. See above link to check for yourself.
I verified all that and am still stuck
Please provide the following log files and attach them to the issue. Failing to do so will result in the issue being closed without any further comment.
Setup log
Run the setup from the command line (either old-school cmd
or PowerShell) with the following additional arguments: /L*V .\install.log
This will generate the log file install.log
in the same directory the setup resides in. Attach it once the setup is "done" failing.
Last but not least look for C:\Windows\INF\setupapi.dev.log
and attach it as well.
Optionally compress both files down if it gives you troubles uploading.
Your compliance is apprechiated! 😘