Light board disconnect: serial connection closes
GoogleCodeExporter opened this issue · comments
What steps will reproduce the problem?
1. Turn cube on
2. Wait (mttf 10min)
We believe that changing the baud rate on the serial connection may fix the
problem.
Original issue reported on code.google.com by sunder...@gmail.com
on 17 Sep 2011 at 10:45
We believe that the root cause of what we were seeing was that the USB hubs do
not have enough power to drive the arduinos when all ports are connected (they
are not rated at full USB spec). Based on this we reorganized so that there
are fewer dimduinos left on each hub. This appears to have significantly
lessened the issue.
We saw 1 dimduino box disconnecting in a slightly different mode after this.
We are not sure if it is related. We replaced the arduino in the dimduino box,
and this appeared to resolve. We are currently in monitor mode to determine if
the issue is completely resolved.
Original comment by sunder...@gmail.com
on 20 Sep 2011 at 5:36