Evil-WinRM

The ultimate WinRM shell for hacking/pentesting

Description & Purpose

This shell is the ultimate WinRM shell for hacking/pentesting.

WinRM (Windows Remote Management) is the Microsoft implementation of WS-Management Protocol. A standard SOAP based protocol that allows hardware and operating systems from different vendors to interoperate. Microsoft included it in their Operating Systems in order to make life easier to system administrators.

This program can be used on any Microsoft Windows Servers with this feature enabled (usually at port 5985), of course only if you have credentials and permissions to use it. So we can say that it could be used in a post-exploitation hacking/pentesting phase. The purpose of this program is to provide nice and easy-to-use features for hacking. It can be used with legitimate purposes by system administrators as well but the most of its features are focused on hacking/pentesting stuff.

Features

Compatible to Linux and Windows client systems
Load in memory Powershell scripts
Load in memory dll files bypassing some AVs
Load in memory C# (C Sharp) assemblies bypassing some AVs
Load x64 payloads generated with awesome donut technique
AMSI Bypass
Pass-the-hash support
Kerberos auth support
SSL and certificates support
Upload and download files showing progress bar
List remote machine services without privileges
Command History
WinRM command completion
Local files completion
Colorization on prompt and output messages (can be disabled optionally)
Docker support (prebuilt images available at Dockerhub)
Trap capturing to avoid accidental shell exit on Ctrl+C

Help

Usage: evil-winrm -i IP -u USER [-s SCRIPTS_PATH] [-e EXES_PATH] [-P PORT] [-p PASS] [-H HASH] [-U URL] [-S] [-c PUBLIC_KEY_PATH ] [-k PRIVATE_KEY_PATH ] [-r REALM]
    -S, --ssl                        Enable ssl
    -c, --pub-key PUBLIC_KEY_PATH    Local path to public key certificate
    -k, --priv-key PRIVATE_KEY_PATH  Local path to private key certificate
    -r, --realm DOMAIN               Kerberos auth, it has to be set also in /etc/krb5.conf file using this format -> CONTOSO.COM = { kdc = fooserver.contoso.com }
    -s, --scripts PS_SCRIPTS_PATH    Powershell scripts local path
    -e, --executables EXES_PATH      C# executables local path
    -i, --ip IP                      Remote host IP or hostname (required)
    -U, --url URL                    Remote url endpoint (default wsman)
    -u, --user USER                  Username (required if not using kerberos)
    -p, --password PASS              Password
    -H, --hash NTHash                NTHash 
    -P, --port PORT                  Remote host port (default 5985)
    -V, --version                    Show version
    -n, --no-colors                  Disable colors
    -h, --help                       Display this help message

Requirements

Ruby 2.3 or higher is needed. Some ruby gems are needed as well: winrm >=2.3.2, winrm-fs >=1.3.2, stringio >=0.0.2. Depending of your installation method (3 availables) the installation of them could be required to be done manually.

Another important requirement only used for Kerberos auth is to install the Kerberos package used for network authentication. For some Linux like Debian based (Kali, Parrot, etc.) it is called krb5-user. For BlackArch it is called krb5 and probably it could be called in a different way for other Linux distributions.

Installation & Quick Start (4 methods)

Method 1. Installation directly as ruby gem (dependencies will be installed automatically on your system)

Step 1. Install it (it will install automatically dependencies): gem install evil-winrm
Step 2. Ready. Just launch it! ~$ evil-winrm -i 192.168.1.100 -u Administrator -p 'MySuperSecr3tPass123!' -s '/home/foo/ps1_scripts/' -e '/home/foo/exe_files/'

Method 2. Git clone and install dependencies on your system manually

Step 1. Install dependencies manually: ~$ sudo gem install winrm winrm-fs stringio
Step 2. Clone the repo: git clone https://github.com/Hackplayers/evil-winrm.git
Step 3. Ready. Just launch it! ~$ cd evil-winrm && ruby evil-winrm.rb -i 192.168.1.100 -u Administrator -p 'MySuperSecr3tPass123!' -s '/home/foo/ps1_scripts/' -e '/home/foo/exe_files/'

Method 3. Using bundler (dependencies will not be installed on your system, just to use evil-winrm)

Step 1. Install bundler: gem install bundler:2.0.2
Step 2. Install dependencies with bundler: cd evil-winrm && bundle install --path vendor/bundle
Step 3. Launch it with bundler: bundle exec evil-winrm.rb -i 192.168.1.100 -u Administrator -p 'MySuperSecr3tPass123!' -s '/home/foo/ps1_scripts/' -e '/home/foo/exe_files/'

Method 4. Using Docker

Step 1. Launch docker container based on already built image: docker run --rm -ti --name evil-winrm -v /home/foo/ps1_scripts:/ps1_scripts -v /home/foo/exe_files:/exe_files -v /home/foo/data:/data oscarakaelvis/evil-winrm -i 192.168.1.100 -u Administrator -p 'MySuperSecr3tPass123!' -s '/ps1_scripts/' -e '/exe_files/'

Documentation

Clear text password

If you don't want to put the password in clear text, you can optionally avoid to set -p argument and the password will be prompted preventing to be shown.

Ipv6

To use IPv6, the address must be added to /etc/hosts. Just put the already set name of the host after -i argument instead of an IP address.

Basic commands

upload: local files can be auto-completed using tab key.
- usage: upload local_filename or upload local_filename destination_filename
download:
- usage: download remote_filename or download remote_filename destination_filename

Notes about paths (upload/download): Relative paths are not allowed to use on download/upload. Use filenames on current directory or absolute path. If you are using Evil-WinRM in a docker environment, bear in mind that all local paths should be at /data and be pretty sure that you mapped it as a volume in order to be able to access to downloaded files or to be able to upload files from your local host O.S.

services: list all services showing if there your account has permissions over each one. No administrator permissions needed to use this feature.
menu: load the Invoke-Binary, Dll-Loader, Donut-Loader and Bypass-4MSI functions that we will explain below. When a ps1 is loaded all its functions will be shown up.

Load powershell scripts

To load a ps1 file you just have to type the name (auto-completion using tab allowed). The scripts must be in the path set at -s argument. Type menu again and see the loaded functions. Very large files can take a long time to be loaded.

Advanced commands

Invoke-Binary: allows exes compiled from c# to be executed in memory. The name can be auto-completed using tab key. Arguments for the exe file can be passed comma separated. Example: Invoke-Binary /opt/csharp/Binary.exe 'param1, param2, param3'. The executables must be in the path set at -e argument.
Dll-Loader: allows loading dll libraries in memory, it is equivalent to: [Reflection.Assembly]::Load([IO.File]::ReadAllBytes("pwn.dll"))

The dll file can be hosted by smb, http or locally. Once it is loaded type menu, then it is possible to autocomplete all functions.
Donut-Loader: allows to inject x64 payloads generated with awesome donut technique. No need to encode the payload.bin, just generate and inject!

You can use this donut-maker to generate the payload.bin if you don't use Windows. This script use a python module written by Marcello Salvati (byt3bl33d3r). It could be installed using pip:

pip3 install donut-shellcode
Bypass-4MSI: patchs AMSI protection.

Kerberos

First you have to sync date with the DC: rdate -n <dc_ip>
To generate ticket there are many ways:
- Using ticketer.py from impacket:
  
  ticketer.py -dc-ip <dc_ip> -nthash <krbtgt_nthash> -domain-sid <domain_sid> -domain <domain_name> <user>
- If you get a kirbi ticket using Rubeus or Mimikatz you have to convert to ccache using ticket_converter.py:
  
  python ticket_converter.py ticket.kirbi ticket.ccache
Add ccache ticket. There are 2 ways:

export KRB5CCNAME=/foo/var/ticket.ccache

cp ticket.ccache /tmp/krb5cc_0
Add realm to /etc/krb5.conf (for linux). Use of this format is important:
```
 CONTOSO.COM = {
             kdc = fooserver.contoso.com
 }
```
Check Kerberos tickets with klist
To remove ticket use: kdestroy
For more information about Kerberos check this cheatsheet

Changelog:

Changelog and project changes can be checked here: CHANGELOG.md

Credits:

Staff:

Cybervaca, (founder). Twitter: @CyberVaca_
OscarAkaElvis, Twitter: @OscarAkaElvis
Laox, Twitter: @_Laox

Hat tip to:

Vis0r for his personal support.
Alamot for his original code.
3v4Si0N for his awesome dll loader.
WinRb All contributors of ruby library.
TheWover for his awesome donut tool.
byt3bl33d3r for his python library to create donut payloads.
Sh11td0wn for inspiration about new features.
Hackplayers for giving a shelter on their github to this software.

Disclaimer & License

This script is licensed under LGPLv3+. Direct link to License.

Evil-WinRM should be used for authorized penetration testing and/or nonprofit educational purposes only. Any misuse of this software will not be the responsibility of the author or of any other collaborator. Use it at your own servers and/or with the server owner's permission.

Mrnmap / EvilWinRM