This version incorporates the ability to generate either a single ISO for OCP 4.x installations or multiple ISOs depending on needs. These ISOs are created for when you need statis IPs.
New in the version: Make sure that genisoimage package is installed. Specially thanks to Scott Worthington (https://github.com/worsco) for this Pull Request.
Some customers would like to use static IPs for their OCP nodes but don't have a working DHCP server for various reasons. This can be done using the ISO for CoreOS and messing with the boot parameters. However, this is involves lots of error prone typing. This project is designed to work around that and originally created individualized ISOs for each node. In v2.1, it can be used to create a single ISO with a menu item for each node being built. Due to screen space limitations, it is NOT recommend that you use this to create more than 7 nodes at a time (1 bootstrap, 3 master control planes, and 3 worker nodes). It might work, but you might have problems with the display on boot. Caveat user. If you would prefer to have multiple ISOs, there is a separate playbook for that.
In the group_vars/all.yml file, define the following variables:
gateway - default router IP
netmask - default netmask
interface - NIC device name. Defaults to ens192 which is default for VMWare
dns - dns server
webserver_url - webserver that holds the Ignition file
webserver_port - webserver port for the webserver above
ocp_version - OCP version you are going for. Currently defaults to 4.3
iso_checksum - sha256 checksum of the ISO. Currently correct as of 2020-01-23 and OCP 4.3
iso_name - Name of the ISO to download. Makes certain assumptions that should be verified
rhcos_bios - Name of the BIOS image to boot from. Make certain assumptions that should be verified
In inventory.yml you will need to define your hosts:
bootstrap - bootstrap node and its ipv4 address
masters - You will need to define 3 master nodes and their ipv4 address
workers - However many worker nodes you want and their corresponding ipv4 addresses. Recommend no more than 3 at a go.
You will need to use create individual ignition files and load them to your webserver. This project does NOT currently do that.
Once the inventory is created, you can run either of the following commands:
For single:
ansible-playbook playbook-single.yml -K
For multiple:
ansible-playbook playbook-multi.yml -K
The ISO(s) will be created in the /tmp directory. The -K is to request for the BECOME password which is
required to mount an ISO (assuming you don't have passwordless sudo).
Special thanks to Shanna Chan for trailblazing these issues (detail here: https://shanna-chan.blog/2019/07/26/openshift4-vsphere-static-ip/) and inspiring its creation.