Universal WaveRNN
erogol opened this issue · comments
I am training an universal waveRNN with >900 speakers. I aim to release this model to the community which hopefully solves the vocoder dependence of TTS solutions in general.
I am using https://github.com/erogol/WaveRNN
By now, it looks promising and is able to generalize well for new speakers. Updates will be shared here...
That's great news, thank you!
I have already tried your MoL implementation and I am able to get around 1KHz/s on a 2080Ti. That means around 20 times RTF (real time factor) for a 22050Hz model.
Do you have any thoughts on how to speed up the generation time?
There are a couple of things need to be done.
- Find the minimum network size which gives on par performance.
- Prune the network to reduce the parameter size. There are ways to do in training or after training.
- Transfer model to C++ backend using Eigen or ant comparable library. I am not sure if Pytorch C++ end is ready to do this. Maybe I am wrong.
If anyone has any take on any of these, I am open to any contribution and further discussion.
Almost ready!! Here are some samples:
Make sure you listened to the speaking piano :).
https://soundcloud.com/user-565970875/sets/universal-vocoder-with-wavernn
So the final model is with a Mixture of Logistic Distribution output and 16K sampling rate.
It works for any speaker I've tried so far, even in different languages, although it is trained with only English.
https://drive.google.com/drive/u/1/folders/15JhAbc91dT-RRZwakh_v4tBVOEuoOikg
Hi @erogol, thanks for the awesome work! Just wanted to let you know that I've also had some good results with Amazon's model Robust Universal Neural Vocoding. My implementation is here if it is of any interest to you.
Hi @erogol, I am currently playing with your universal WaveRNN and I couldn't find the right TTS model to pair it with. AFAIK, the universal WaveRNN you released requires a hop length of 200 because of the upscale factors of [5, 5, 8] but the pretrained tacotron 2 models all have a hop length of 275 making them incompatible. Is this correct?
@erogol I used 16K sampling rate. All the other values computed based on this value. What I do for LJSpeech is to manually resample the generated mel-spec before feeding WaveRNN. Or you can finetune for a short while .
@erogol Great work, thanks! Did you use TTS-generated mel-spectrograms to train this model, or ground-truth ones? We are planning to train a similar wavernn using a multi-speaker TTS (or potentially our speech-to-speech system) and raising the sample-rate to 22.5 kHz. I would really appreciate if you could share some training details (i.e. number of GPU's, total training time, number of iterations). Thanks!
@erogol Do you have any tips on how to resample the mel spectrogram? I am having trouble figuring out how to 'manually' resample the mel-spectrogram because isn't the mel spectrogram supposed to be sample rate independent? Thanks in advance!
@belevtsoff Not sure about the universal vocoder but the vocoder for Tacotron 2 uses the TTS mel specs and the vocoder for Tacotron 1 uses both the ground truth as well as the TTS in conjunction.
@belevtsoff How's respeecher doing?
@btomtom5 @belevtsoff actually vocoder for Tacotron has not seen mel specs from Tacotron. It is only trained on Tacotron2 mel specs and I reused it.
@belevtsoff as far as I remember, it was 4GPUs for >1m iterations. Something like 1 week.
@btomtom5 @erogol I see, thanks. Have you though about training the universal vocoder on generated spectrograms form a multispeaker Tacotron[2]?
@PetrochukM Doing well, thanks. Trying to make our vocoders more robust.
@belevtsoff tacotron2 vocoder is trained with generated mel specs but the universal used only ground truth specs for training.
I wanted to try using the Universal WaveRNN with the Benchmark.ipynb notebook.
I got an error after
from WaveRNN.models.wavernn import Model
bits = 10
wavernn = Model(
rnn_dims=512,
fc_dims=512,
mode="mold",
pad=2,
upsample_factors=VOCODER_CONFIG.upsample_factors, # set this depending on dataset
feat_dims=VOCODER_CONFIG.audio["num_mels"],
compute_dims=128,
res_out_dims=128,
res_blocks=10,
hop_length=ap.hop_length,
sample_rate=ap.sample_rate,
).cuda()
which is
TypeError: __init__() missing 3 required positional arguments: 'mulaw', 'use_aux_net', and 'use_upsample_net'
What is the recommendation for these parameters? Or should one do bigger changes in the Benchmark.ipynb notebook? (For TTS I am using the checkpoint_260000.pth.tar from the Tacotron2-iter-260K-824c091 branch.
Edit: I copied the relevant part from the master branch of TTS and I ran the notebook. Btw. is it possible to make the generated speech slightly slower and/or lower the overall frequency?
@erogol In order to take into account the different hop length (275 versus 200) in TTS/WaveRNN I made an interpolation of the TTS generated mel spectrogram before feeding into WaveRNN:
nt = len(mel_postnet_spec)
ntnew = int(nt*2.75/2.0)
x = np.arange(nt, dtype=np.float32)
f = scipy.interpolate.interp1d(x, mel_postnet_spec, axis=0, kind='cubic')
mel_postnet_spec = f(np.linspace(0, nt-1, ntnew))
However the voice comes out with a much higher pitch than the one generated by GL (sounding a bit childlish). The sample rate in TTS is 22050 while in WaveRNN it is 16000. Should one also modify the mel columns in some way? I would be grateful for a hint - I am a complete outsider to the text-to-speach arena so most probably I do not know even basic stuff..
@erogol Hi! Great work! I downloaded the tar file from google drive, but I cant seem to untar it. Keeps saying it does not look like a tar file. Do you have any idea what might be going wrong?
Thanks
@Shikherneo2, you mean file with . pth?
It's Pytorch type of file.
Btw, use discourse.mozilla.org for such issues, it's more convenient.
@shad94 Ahh.. My bad. I have been trying to untar it! I will checkout discourse.
Thanks a ton!
@erogol Hello. I'm trying to create universal vocoder of my own with LibriTTS dataset based on your setting.
Did you trained this universal vocoder model with train-clean only? or include train-other-500 in LibriTTS also?
I only used train-clean for this model AFAIR.
Hi! I tried using this directly from CLI with this command:
$ tts --text "hello, how are you doing?" --vocoder_path ~/tts/best_model_16K.pth.tar --vocoder_config_path ~/tts/config_16K.json && play tts_output.wav
but got the following error:
> tts_models/en/ljspeech/tacotron2-DDC is already downloaded.
> Using model: Tacotron2
> Model's reduction rate `r` is set to: 1
Traceback (most recent call last):
File "/home/llaz/.local/bin/tts", line 8, in <module>
sys.exit(main())
File "/home/llaz/.local/lib/python3.9/site-packages/TTS/bin/synthesize.py", line 226, in main
synthesizer = Synthesizer(
File "/home/llaz/.local/lib/python3.9/site-packages/TTS/utils/synthesizer.py", line 75, in __init__
self._load_vocoder(vocoder_checkpoint, vocoder_config, use_cuda)
File "/home/llaz/.local/lib/python3.9/site-packages/TTS/utils/synthesizer.py", line 161, in _load_vocoder
self.vocoder_config = load_config(model_config)
File "/home/llaz/.local/lib/python3.9/site-packages/TTS/config/__init__.py", line 92, in load_config
model_name = _process_model_name(config_dict)
File "/home/llaz/.local/lib/python3.9/site-packages/TTS/config/__init__.py", line 59, in _process_model_name
model_name = config_dict["model"] if "model" in config_dict else config_dict["generator_model"]
KeyError: 'generator_model'
Am I doing something wrong?
@lawrence-laz This repo is not maintained anymore try 🐸TTS