Klipper: Image build is failing
mkuf opened this issue · comments
Nightly Image build for klipper is failing
https://github.com/mkuf/prind/actions/runs/6269327918/job/17025592060
#45 [linux/arm/v7 build 4/4] RUN python -m venv venv && venv/bin/pip install -r klipper/scripts/klippy-requirements.txt && venv/bin/pip install numpy && venv/bin/python -m compileall klipper/klippy && venv/bin/python klipper/klippy/chelper/__init__.py
#45 459.7 Installing backend dependencies: finished with status 'error'
#45 459.8 error: subprocess-exited-with-error
#45 459.8
#45 459.8 × pip subprocess to install backend dependencies did not run successfully.
#45 459.8 │ exit code: 1
#45 459.8 ╰─> [36 lines of output]
#45 459.8 Collecting patchelf>=0.11.0
#45 459.8 Downloading patchelf-0.17.2.1-py2.py3-none-manylinux_2_17_armv7l.manylinux2014_armv7l.musllinux_1_1_armv7l.whl (381 kB)
#45 459.8 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 381.1/381.1 kB 1.2 MB/s eta 0:00:00
#45 459.8 Collecting ninja>=1.8.2
#45 459.8 Downloading ninja-1.11.1.tar.gz (27 kB)
#45 459.8 Installing build dependencies: started
#45 459.8 Installing build dependencies: finished with status 'done'
#45 459.8 Getting requirements to build wheel: started
#45 459.8 Getting requirements to build wheel: finished with status 'done'
#45 459.8 Preparing metadata (pyproject.toml): started
#45 459.8 Preparing metadata (pyproject.toml): finished with status 'done'
#45 459.8 Building wheels for collected packages: ninja
#45 459.8 Building wheel for ninja (pyproject.toml): started
#45 459.8 Building wheel for ninja (pyproject.toml): finished with status 'error'
#45 459.8 error: subprocess-exited-with-error
#45 459.8
#45 459.8 × Building wheel for ninja (pyproject.toml) did not run successfully.
#45 459.8 │ exit code: 1
#45 459.8 ╰─> [11 lines of output]
#45 459.8 Traceback (most recent call last):
#45 459.8 File "/tmp/pip-build-env-pv655okc/overlay/lib/python3.11/site-packages/skbuild/setuptools_wrap.py", line 645, in setup
#45 459.8 cmkr = cmaker.CMaker(cmake_executable)
#45 459.8 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
#45 459.8 File "/tmp/pip-build-env-pv655okc/overlay/lib/python3.11/site-packages/skbuild/cmaker.py", line 148, in __init__
#45 459.8 self.cmake_version = get_cmake_version(self.cmake_executable)
#45 459.8 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
#45 459.8 File "/tmp/pip-build-env-pv655okc/overlay/lib/python3.11/site-packages/skbuild/cmaker.py", line 105, in get_cmake_version
#45 459.8 raise SKBuildError(msg) from err
#45 459.8
#45 459.8 Problem with the CMake installation, aborting build. CMake executable is cmake
#45 459.8 [end of output]
#45 459.8
#45 459.8 note: This error originates from a subprocess, and is likely not a problem with pip.
#45 459.8 ERROR: Failed building wheel for ninja
#45 459.8 Failed to build ninja
#45 459.8 ERROR: Could not build wheels for ninja, which is required to install pyproject.toml-based projects
#45 459.8 [end of output]
#45 459.8
#45 459.8 note: This error originates from a subprocess, and is likely not a problem with pip.
#45 459.8 error: subprocess-exited-with-error
#45 459.8
#45 459.8 × pip subprocess to install backend dependencies did not run successfully.
#45 459.8 │ exit code: 1
#45 459.8 ╰─> See above for output.
#45 459.8
#45 459.8 note: This error originates from a subprocess, and is likely not a problem with pip.
#45 ERROR: process "/bin/sh -c python -m venv venv && venv/bin/pip install -r klipper/scripts/klippy-requirements.txt && venv/bin/pip install numpy && venv/bin/python -m compileall klipper/klippy && venv/bin/python klipper/klippy/chelper/__init__.py" did not complete successfully: exit code: 1