mkj/litesdcard

                              __   _ __      _______  _____            __
                             / /  (_) /____ / __/ _ \/ ___/__ ________/ /
                            / /__/ / __/ -_)\ \/ // / /__/ _ `/ __/ _  /
                           /____/_/\__/\__/___/____/\___/\_,_/_/  \_,_/

                               Copyright 2017-2021 / EnjoyDigital
                               Copyright 2017-2018 / LambdaConcept

                            A small footprint and configurable SDCard
                                    core powered by Migen & LiteX

[> Intro

LiteSDCard is a small footprint and configurable SDCard core.

LiteSDCard is part of LiteX libraries whose aims are to lower entry level of complex FPGA cores by providing simple, elegant and efficient implementations of components used in today's SoC such as Ethernet, SATA, PCIe, SDRAM Controller...

Using Migen to describe the HDL allows the core to be highly and easily configurable.

LiteSDCard can be used as LiteX library or can be integrated with your standard design flow by generating the verilog rtl that you will use as a standard core.

[> Features

PHY:

Generic PHY validated on Xilinx, Altera, Lattice FPGAs

Core:

Command & Data CRC Inserters/Checkers
Single and Multiple blocks write/read
Errors detection and reporting
Dynamically configurable clock speed

Frontend:

Synthetizable BIST
DMAs

[> Performances

SD0: Good RAM 8GB (cheap SD Card) SD1: SanDisk Ultra 32GB SD2: SanDisk Extreme 128GB

W/R(MB/s) performance vs SD frequency:

SDCard	20MHz	40MHz	75MHz	100MHz	125MHz
SD0	4/9	6/18	7/33	7/44	7/56
SD1	6/9	9/18	12/33	14/44	15/56
SD2	9/9	18/18	33/33	43/44	54/55

[> Possible improvements

add standardized interfaces (AXI, Avalon-ST)
add UHS-I/II PHYs.
add Linux drivers.
... See below Support and consulting :)

If you want to support these features, please contact us.

[> Getting started

Install Python 3.6+ and FPGA vendor's development tools.
Install LiteX and the cores by following the LiteX's wiki installation guide.
You can find examples of integration of the core with LiteX in LiteX-Boards and in the examples directory.

[> License

LiteSDCard is released under the very permissive two-clause BSD license. Under the terms of this license, you are authorized to use LiteSDCard for closed-source proprietary designs. Even though we do not require you to do so, those things are awesome, so please do them if possible:

tell us that you are using LiteSDCard
cite LiteSDCard in publications related to research it has helped
send us feedback and suggestions for improvements
send us bug reports when something goes wrong
send us the modifications and improvements you have done to LiteSDCard.

[> Support and consulting

We love open-source hardware and like sharing our designs with others.

LiteSDCard is developed and maintained by EnjoyDigital & LambdaConcept.

If you would like to know more about LiteSDCard or if you are already a happy user and would like to extend it for your needs, EnjoyDigital can provide standard commercial support as well as consulting services.

So feel free to contact us, we'd love to work with you! (and eventually shorten the list of the possible improvements :)

[> Contact

E-mail: florent [AT] enjoy-digital.fr po [AT] lambdaconcept.com ramtin [AT] lambdaconcept.com

mkj / litesdcard