Inverter State - unknown
argually opened this issue · comments
Before you create an issue, make sure to update to the current version of modbus_sungrow.yaml
Describe the bug:
My Inverter state under "EMS & Battery Settings" is set to "Self-consumption mode (default)". When I set this the inverter state switches to "unknwon - you should not see me".
If I change the EMS-mode-Settings to "Forced mode" then the inverter mode state changes to "forced mode". If I reset the mode to "Self-consumption mode (default)" it goes back into "unknown mode - you should not see me."
At "Battery status" it shows a battery capacity of 0,0 kWh. But our BYD battery has 12.8 kWh capacity...
A clear and concise description of what the bug is.
The Inverter state can´t be changed to "Self-consumption mode (default)".
Your Sungrow inverter:
-
Model: SH-10.RT v112
-
The inverter is connected via (mark one)
- [] LAN (internal port)
- [] WiNet-S (LAN)
- WiNet-S (WLAN)
-
Are you using a Modbus Proxy (mark one)
- [] yes
- no
- [] I don't know what that is
Home Assistant version:
- Version: [e.g. 2024.6.4]
modbus_sungrow.yaml:
- Version/ time stamp : [e.g. 2024-04-05] (see header of the file)
- I ensured to use the most recent version
** Inverter Firmware Status:**
- I made sure that the newest firmware is installed via the installers account
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Additional context
Add any other context about the problem here.
I have the same problem after installing the last inverter firmware.
I installed the latest firmware to solve the problem…
but it didn’t solve it…
Yesterday my Installer resetted the configuration to "factory default". I changed "set max battery charge|discharge Power to 5.000W. Now everythings seems to work fine again...
Does anybody know how to increase "max battery charge|discharge Power" back to 10.600W?
Do you have a battery that supports such high charge & discharge power?
Either way, you'll have to edit the maximum limits for those values to match your battery:
