mkaiser / Sungrow-SHx-Inverter-Modbus-Home-Assistant

Sungrow SH Integration for Home Assistant for SH3K6, SH4K6, SH5K-20, SH5K-V13, SH3K6-30, SH4K6-30, SH5K-30, SH3.RS, SH3.6RS, SH4.0RS, SH5.0RS, SH6.0RS, SH5.0RT, SH6.0RT, SH8.0RT, SH10RT, SH5.0RT-20, SH6.0RT-20, SH8.0RT-20, SH10RT-20, SH5.0RT-V112, SH6.0RT-V112, SH8.0RT-V112, SH10RT-V112, SH5.0RT-V122, SH6.0RT-V122, SH8.0RT-V122, SH10RT-V122, SH4.6R

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Battery dis/charging power sensors don't work.

brixharlem opened this issue · comments

My battery charging power and discharging power is always 0. Other battery sensors work.
This is not a new issue. I think I have it for some months already.

Your Sungrow inverter:
Model: SH-10.RT

The inverter is connected via
WiNet-S (WLAN)

Are you using a Modbus Proxy (mark one)
no

Home Assistant version:

Version: 2024.3.3
modbus_sungrow.yaml:
Version/ time stamp: today

Expected behavior
Values show live status of battery charging and discharging power.

Screenshots
Screenshot_20240327-131120

Additional context
Capacity is also 0.0. Maybe it's related?

Seems to be system related. I just realised, that the values are missing in the app too.
Screenshot_20240327-210333

That seems very weird. You might want to check in with you installer to make an update on battery and inverter, if you didn't install it yourself/don't want to do the update yourself.

Thank you, @Louisbertelsmann. Unfortunantely my installer ran out of business and I don't have access to the firmware section.

Then you can create your own installer account.

The sensors are alive again! Thank you!!