fipha.exe does not awake from sleep
Chuffnugget opened this issue · comments
Fipha.exe does not awake with the computer after putting the computer to sleep.
Other than this issue, the program works perfectly. Thanks for the time and effort you put into this.
Timeline
- Fipha.exe works and sends data to Home Assistant.
- Put computer to sleep.
- Wake computer, but all entities in Home Assistant remain unavailable. No errors are present in log file.
System
Windows 11 22H2
Latest version of fipha.exe
HWInfo Pro 7.64-5240
Are there any errors in the log file?
Is hwinfo still working after wake?
is fipha still running after wake?
if you restart fipha after wake, is it working again?
what kind of sleep are you using ? (e.g. complete power off, ram saved on disk or is ram still powered (laptop))
Hello, thanks for the quick reply.
There are no errors in the log file. Both HWInfo and fipha are still running after the computer wakes from sleep, and if I restart fipha, it starts working again.
I'm using sleep on a Desktop PC without a battery, so I assume this would mean that anything in RAM is temporarily stored in disk until awakened.
Thanks.
please try 0.0.1.6
this restart the application 10 seconds after waking up from sleep
Hello, I have just tried 0.0.1.6. It looks like it's almost there; I put my computer to sleep and wake it, it sends one or two messages as if it's working, but then all entities go unavailable. It looks like it works for a second or two when I wake up the computer but then dies for some reason.
Here's my log file, you can see that fipha is recognizing the sleep/wakes.
ERROR 2023-10-15 13:04:33,307 MoveNext - No Home Assistant Connection for Flight Instrument Panels
INFO 2023-10-15 13:04:33,320 MoveNext - fipha started
INFO 2023-10-15 13:04:33,357 MoveNext - HWInfo task started, polling interval 1000 ms
INFO 2023-10-15 13:04:33,385 MoveNext - HWINFO Sensors found, Writing all HWINFO Sensors to hwinfo.json
INFO 2023-10-15 13:04:33,405 MqttOnConnected - MQTT Client: Connected with result: Success
INFO 2023-10-15 13:04:46,753 MoveNext - Go To Sleep
ERROR 2023-10-15 13:05:14,366 <Connect>b__16_2 - MQTT Client: Connection lost with reason: NormalDisconnection.
INFO 2023-10-15 13:05:15,299 MqttOnConnected - MQTT Client: Connected with result: Success
INFO 2023-10-15 13:05:21,788 MoveNext - Wake Up
Thanks.
you should see in the logs after wake up that the software has been restarted after 10 seconds (without errors)
Hello, I made a quick video of what's happening.
https://www.youtube.com/watch?v=xy1VDllRPuU&ab_channel=Chuffnugget
It seems to work for a split second, but then goes back to unavailable, even after the 10-20 seconds.
Thanks, Ryan.
sorry that video doesn't help me
do you see that the application restarts 10 seconds after waking up?
the log file should also show this
please leave the pc sleeping for at least one minute before powering back on
then WAIT until the application restarts itself, before checking
also don't run the application from a network share
I increased the wait from 10 sec to 20 sec before it restarts
please re-download the zip
That's got it, changing it to 20 seconds seems to have worked!
Thanks a lot for the support. If you have a PayPal link, feel free to send it as I'll gladly buy you a coffee/beer.