HDMI Partnumber in BOM is wrong
sebastianohl opened this issue · comments
Hi,
we just got our delivery from digikey according to the BOM. However, the HDMI connector is not fitting as it have the wrong direction of the contacts. The part 2000-1-1-20-00-BK has all contacts downwards. However, the PCB require them parallel to the PCB. The part number should be 2000-1-2-30-00-BK which is not longer produced. However, there is 2000-1-2-30-00-BK-TR which seams to be the sucessor (digikey number 1175-2000-1-2-30-00-BK-TRCT-ND).
Regards
Sebastian
Hi @sebastianohl,
Sorry for the late reply, I have moved away from this project a bit and missed the issue.
Thank you for the information, I will actually remove the BOM from the repo, it was a contribution from someone else but I could not verify it.
You should use the information that is in the readme for this repo, where I list most of what you need.
THIS is the HDMI connector that I designed the board for.
the rest of the BOM seams to be fine. At least for me it helped alot as I did not need to gather all parts from the schematic myself.
Great, I'll change that single component only then.
If you don't mind me asking, have you built the board? You said "we", what kind of project are you working on? I'd love to know about people actually building this and their experience!
Would it be possible to re-add the BOM, with the correct parts?