HackHeld
A open source hackable handheld for DIY.
Hackheld Vega
The Hackheld Vega is made to be as simple as possible. Made up of just a D1 Mini, OLED, RGB LED and a couple of buttons! It can run the ESP8266 Deauther, but you can also write your own firmware using Arduino.
Hackheld Vega - PCB
Hackheld Vega - Bill Of Materials (BOM)
| Part | Amount | Description | Link (affiliate) |
|---|---|---|---|
| D1 Mini | 1 | Wemos/Lolin D1 Mini ESP8266 Dev Board | https://s.click.aliexpress.com/e/_99hh4H |
| 1.3" OLED SH1106 | 1 | I2C (4Pin) Make sure its pins are in this order (left to right): VDD,GND,SCK,SDA (The position of GND is important, it must be the second pin! The other pins can sometimes have slightly different labels) | https://s.click.aliexpress.com/e/_9gf1BF |
| Buttons | 6 | 6x6mm 4pin tactile push button | https://s.click.aliexpress.com/e/_9IwWtj |
| Neopixel | 1 | RGB LED WS2812B 5050 | https://s.click.aliexpress.com/e/_9fRrPj |
| PCB | 1 | Download Gerbers | - |
| 3D Printed Case | 1 | Download STL | - |
| Case screws | 4 | M2.5 screws | https://s.click.aliexpress.com/e/_9QSLrc |
Hackheld Vega - Case
Additionally, you will need 4 M2.5 screws to connect the PCB to the case.
Hackheld Vega - Firmware
You can write your own code for it, or run the ESP8266 Deauther V2 (You can download a bin file here)