Acrylic case and 3d printed case problems
konisteel opened this issue · comments
Hello, i sent the acrylic case files to my local laser cutting shop but they are having a problem with the size. It says the file is too small and it has to be scaled but i do not know what the scale factor is.
In the 3d printed case files when i export it as .stl from f360 and try to 3d print itl; it shows the file too small.
Any idea why this is happening also an instruction of the acrylic case files would help a bunch
Hello @konisteel,
could this be an issue with the imported unit of measurement? I'm pretty sure I exported the files with metric measurement, if by default your CAD is set to imperial there might be some issues.
Hello @konisteel,
could this be an issue with the imported unit of measurement? I'm pretty sure I exported the files with metric measurement, if by default your CAD is set to imperial there might be some issues.
Hey, i don't use cad I just sent the files to the shop and told me the total dimensions for the case is 2cm which is ofc wrong and need to be resized but I don't know till how much so i'm in a pickle.
I also opened the file in adobe illustrator and it came out like this. I opened it original size
other than than any idea which ones will be stacked over each other and which is optional? Why are there same design for 3mm and 2mm
other than than any idea which ones will be stacked over each other and which is optional? Why are there same design for 3mm and 2mm
@TahuTech might help here answering your questions since they contributed the case