This is Capacitive touch screen,uart serial screen,4.3inch, for marlin based 3D printer control board
you can control the octo printing from the lcd, or control the lcd printing from octopi web page.this function only works with PandaPi print mode and version after 2021.3.6 that include marlin and LCD.
you can also download all the source code and tools here: https://drive.google.com/drive/folders/1toJU_dtaq2irLVg9aK6b8gs5-JVmY1cc?usp=sharing
How to customize UI, those pictures of UI are based on the FYSETC LCD. Instead of resistive touch and low resolution 480272, This LCD is capacitive touch and high resolution 800480 screen
Step 1：Format the TF card and copy files run windows command system as administrator, then enter：
format g:/fs:fat32/a:4096/qNote: g is the drive letter of your TF card ，and the card size must be 1-16G.
Step 2：Copy the folder DWIN_SET which contained your newest 32.icl to TF card,LCD will only recognize this folder name;
Step3: Insert the TF card into the card socket (back side of the screen) ,and then power on the screen. Wait for the blue screen and appear on the first line of the screen “SD Card Process... END !” it’s may take 1-2minutes. Turn off the power and unplug out the TF card, re-power the screen Wait for the boot screen.
