Giters

lora-aprs / LoRa_APRS_iGate

This is a LoRa APRS iGate/Digi based on an ESP32

Home Page:https://www.lora-aprs.info

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Installed on my Heltec Lora 32 V3 doesn't seem to actually transmit

mytechguyri opened this issue · comments

commented

IMG_20240327_012308
Describe the bug
Wanted to see if it was transmitting a beacon with the iGate, I don't know if its not supposed to by design, I disabled aprs-is, so the assumption is that it would transmit the beacon over RF. I also don't know if this has anything to do with it, but the display is showing Type:
IMG_20240327_012308
Error (see attached image) when it attempts to send a beacon.

I tuned my radio to 433.775 expecting to hear the data being sent at the beacon interval, but got nothing.

commented

I think you have to tune some SDR with the ability to listen on 125kHz bandwidth. With HAM radio with a max 25 kHz channel bandwidth, you will listen to nothing :)