Reboot Loop by usind Calsigns starting with "DN"
Retaner opened this issue · comments
Hello,
I tried configuring an Igate with firmware V23.31. With the call sign “DN1KWT” after the boot page I got an upside down message screen very short, for milliseconds, and then the start page with the firmware number. This happens again and again.
For example, if I just change it to “DK1KWT”, it works.
I tested several combinations with "DN" with the same problem. For me it looks like that there is a problem with the prefix "DN".
Hello,
I found the reason for the problem.
I used the alternative server “koblenz.aprs2.net” instead of the default server “euro.aprs2.net”.
I had no problems with several different call signs. Only now with the prefix “DN”.
After switching to the server “euro.aprs2.net” it now works.
I don't know what's wrong with the "Koblenz server", but I have a working system now.