Reboot loop no matter what
wyan opened this issue · comments
Describe the bug
The Lora32 shows the boot screen but gets stuck in a boot loop.
To Reproduce
Steps to reproduce the behavior:
- Check out commit
8c2c217acca4f951fc3583eed54a9c47e35e3e27
(tagv23.31.1
, currentlyHEAD
on master branch) - adjust config file, wifi active, aprsis active, everything else tried in many many combinations, all of them resulting in the same boot loop
- compile, upload to device, upload file system image
Expected behavior
The board boots up correctly
Screenshots
Rebooting...
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 188777542, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13192
load:0x40080400,len:3028
entry 0x400805e4
[INFO][Main] LoRa APRS iGate by OE5BPA (Peter Buchegger)
[INFO][Main] Version: 23.31.01
[INFO][Main] Board TTGO_LORA32_V2 loaded.
[INFO][Main] Will start watchdog now...
[INFO][TaskManager] will setup all tasks...
[DEBUG][TaskManager] call setup for WifiTask
[INFO][WiFiEvent] WiFi Started
[DEBUG][WifiTask] Looking for AP: finitud labs
[DEBUG][TaskManager] call setup for DisplayTask
[DEBUG][TaskManager] call setup for RadiolibTask
[DEBUG][RadiolibTask] [00:00:00] using SX1278
[DEBUG][TaskManager] call setup for RouterTask
[DEBUG][TaskManager] call setup for BeaconTask
[DEBUG][TaskManager] call setup for OTATask
[DEBUG][TaskManager] call setup for NTPTask
[DEBUG][TaskManager] call setup for FTPTask
[DEBUG][FTPTask] Adding user to FTP Server: admin
[DEBUG][TaskManager] call setup for AprsIsTask
[INFO][Main] setup done...
[INFO][WiFiEvent] WiFi Connected
E (22434) task_wdt: Task watchdog got triggered. The following tasks did not reset the watchdog in time:
E (22434) task_wdt: - loopTask (CPU 1)
E (22434) task_wdt: Tasks currently running:
E (22434) task_wdt: CPU 0: IDLE
E (22434) task_wdt: CPU 1: IDLE
E (22434) task_wdt: Aborting.
abort() was called at PC 0x400fef50 on core 0
Backtrace: 0x40083cfd:0x3ffbecdc |<-CORRUPTED
ELF file SHA256: 46b05c5ad1378826
Rebooting...
Desktop (please complete the following information):
- OS: Ubuntu 23.04 on x64
- PlatformIO Version: PlatformIO Core, version 6.1.10
- Firmware Version: latest as of today
Board name:
Lilygo TTGO Lora32 T3_V1.6.2 (20210420)
Additional context
I've tried switching on and off the following: FTP, TX, send_on_hf, APRS-IS, all of them lead to the same boot loop.
The config file used (private bits redacted out):
{
"callsign": "EA4FYQ-10",
"network": {
"DHCP": true,
"static": {
"ip": "192.168.0.100",
"subnet": "255.255.255.0",
"gateway": "192.168.0.1",
"dns1": "192.168.0.1",
"dns2": "192.168.0.2"
},
"hostname": {
"overwrite": false,
"name": "EA4FYQ-10"
}
},
"wifi": {
"active": true,
"AP": [
{
"SSID": "xxx xxx",
"password": "xxx"
}
]
},
"beacon": {
"message": "LoRa-iGate",
"position": {
"latitude": xxx
"longitude": xxx
},
"use_gps": false,
"timeout": 15,
"send_on_hf": true
},
"aprs_is": {
"active": true,
"passcode": "xxx",
"server": "euro.aprs2.net",
"port": 14580,
"filter": ""
},
"digi": {
"active": false
},
"lora": {
"frequency_rx": 433775000,
"gain_rx": 0,
"frequency_tx": 433775000,
"power": 20,
"spreading_factor": 12,
"signal_bandwidth": 125000,
"coding_rate4": 5,
"tx_enable": false
},
"display": {
"always_on": true,
"timeout": 10,
"overwrite_pin": 0,
"turn180": true
},
"ftp": {
"active": true,
"user": [
{
"name": "xxx",
"password": "xxx"
}
]
},
"mqtt": {
"active": false,
"server": "",
"port": 1883,
"name": "",
"password": "",
"topic": "LoraAPRS/Data",
"will_active": false,
"will_topic": "LoraAPRS/State",
"will_message": "offline",
"birth_message": "online"
},
"syslog": {
"active": false,
"server": "",
"port": 514
},
"ntp_server": "pool.ntp.org"
}