booting loop

[Zoe1212Zoe]

i have the board ttgo LoRa32 v2.
if i set aprs_is
active to true,my board goes in a booting loop.
when i set i to false, it boots but no sign of any beacon being sent.

my settings are:
{
"callsign": "13RF1244-10",
"network": {
"DHCP": true,
"static": {
"ip": "192.168.0.100",
"subnet": "255.255.255.0",
"gateway": "192.168.0.1",
"dns1": "192.168.0.1",
"dns2": "192.168.0.2"
},
"hostname": {
"overwrite": false,
"name": "13RF1244-10"
}
},
"wifi": {
"active": true,
"AP": [
{
"SSID": "CampPro-AF0329",
"password": "19RF1244"
}
]
},
"beacon": {
"message": "LoRa iGATE , Info: github.com/lora-aprs/LoRa_APRS_iGate",
"position": {
"latitude":51.54192,
"longitude": 10.92011
},
"use_gps": false,
"timeout": 15
},
"aprs_is": {
"active":false,
"passcode": "5521",
"server": "euro.aprs2.net",
"port": 14580,
"filter": ""

},
"digi": {
	"active": true,
	"beacon": true
},
"lora": {
	"frequency_rx": 433775000,
	"gain_rx": 20,
	"frequency_tx": 433775000,
	"power": 10,
	"spreading_factor": 12,
	"signal_bandwidth": 125000,
	"coding_rate4": 5,
	"tx_enable": true
},
"display": {
	"always_on": true,
	"timeout": 10,
	"overwrite_pin": 0,
	"turn180":true
},
"ftp": {
	"active": false,
	"user": [
		{
			"name": "ftp",
			"password": "ftp"
		}
	]
},
"mqtt": {
	"active": false,
	"server": "",
	"port": 1883,
	"name": "",
	"password": "",
	"topic": "LoraAPRS/Data",
	"will_active": false,
	"will_topic": "LoraAPRS/State",
	"will_message": "offline",
	"birth_message": "online"
},
"syslog": {
	"active": false,
	"server": "",
	"port": 514
},
"ntp_server": "pool.ntp.org"

}

[Zoe1212Zoe]

by tying to sent beacon its says: path:, type:error

[Peter Buchegger]

you can ignore the path error, this is known and is just a display issue.

can you open the serial monitor and copy and paste some lines into this issue?

[Peter Buchegger]

@Zoe1212Zoe you dont need to provide me more details! I already found the bug 😉
update your code and flash your board again.