NTP:Booting - no connection
dm6tt opened this issue · comments
Describe the bug
NTP will stay in state booting, no Log message, no connection
To Reproduce
Steps to reproduce the behavior:
- Go to '...'
- Click on '....'
- Scroll down to '....'
- See error
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:1044
load:0x40078000,len:10124
load:0x40080400,len:5828
entry 0x400806a8
[INFO][Main] LoRa APRS iGate by OE5BPA (Peter Buchegger)
[INFO][Main] Version: 22.20.0
[INFO][Main] Board ETH_BOARD loaded.
[INFO][TaskManager] will setup all tasks...
[DEBUG][TaskManager] call setup for WifiTask
[INFO][WiFiEvent] WiFi Started
[DEBUG][WifiTask] Looking for AP: WLAN
[DEBUG][WifiTask] Looking for AP: xxxxxxx
[DEBUG][TaskManager] call setup for EthTask
[INFO][WiFiEvent] WiFi Started
[INFO][WiFiEvent] WiFi Started
[DEBUG][TaskManager] call setup for DisplayTask
[DEBUG][TaskManager] call setup for RadiolibTask
[DEBUG][TaskManager] call setup for RouterTask
[DEBUG][TaskManager] call setup for BeaconTask
[DEBUG][TaskManager] call setup for OTATask
[DEBUG][TaskManager] call setup for NTPTask
[DEBUG][TaskManager] call setup for FTPTask
[DEBUG][FTPTask] Adding user to FTP Server: ftp
[DEBUG][TaskManager] call setup for AprsIsTask
[INFO][WiFiEvent] ETH Connected
[INFO][WiFiEvent] ETH Connected
[INFO][Main] setup done...
[INFO][WiFiEvent] WiFi Connected
[INFO][WiFiEvent] WiFi Connected
[INFO][WiFiEvent] WiFi MAC: 34:94:54:5F:48:78
[INFO][WiFiEvent] IPv4: 192.168.3.xxx
[INFO][WiFiEvent] Gateway: 192.168.3.1
[INFO][WiFiEvent] DNS1: 192.168.3.1
[INFO][WiFiEvent] DNS2: 0.0.0.0
[INFO][WiFiEvent] WiFi MAC: 34:94:54:5F:48:78
[INFO][WiFiEvent] IPv4: 192.168.3.xxx
[INFO][WiFiEvent] Gateway: 192.168.3.1
[INFO][WiFiEvent] DNS1: 192.168.3.1
[INFO][WiFiEvent] DNS2: 0.0.0.0
[DEBUG][WifiTask] IP address: 192.168.3.xxx
[INFO][BeaconTask] [00:00:11] DM6TT-11>APLG01:=5013.98NL00726.46E&LoRa iGATE & Digi, Info: github.com/lora-aprs/LoRa_APRS_iGate
Desktop (please complete the following information):
- OS:
- PlatformIO Version:
- Firmware Version:
Board name:
Eth32 POE Board
Additional context
The iGate is not connecting to NTP.
Tried with different NTP configurations and different networks.
Config Line:
"ntp_server": "ptbtime1.ptb.de"
It worked for a long time, no clue what happend.
I reflashed the board with the newest firmware.
found the problem.
i have no idea how to send a pull request. i will mail the fix to @peterus
thx for the fix!