-------------------------------------------------------------------------------------- skymax -------------------------------------------------------------------------------------- This project was forked from manio/skymax-demo on git since it allows me to query my own EASunPower solar inverter. Apparently, from what I gather on internet forums, a company in Taiwan called Voltronic Power sells a hardware platform used in many different brands of inverter. And my brand just happens to be one of those Voltronic clones so all the same commands apply. -------------------------------------------------------------------------------------- compilation / running -------------------------------------------------------------------------------------- (You will need cmake, make and gcc already installed. Use apt-get to get them) Sample build/compilation procedure: $ git clone https://github.com/nrm21/skymax-demo $ cd skymax-demo $ mkdir out $ cd out $ cmake .. $ make Then you need to get the real hidraw device name (probably hidraw0): $ dmesg | grep hidraw and then run the program like this (assuming it is located in '/opt/skymax/out' dir): $ /opt/skymax/out/skymax The program will run once, it will spit out values it receives from the inverter in JSON format and exits. It was intended to be run by telegraf using the exec plugin every 15 seconds, and that output data will be imported into an InfluxDB instance where it can be easily graphed by grafana (or some other "TIG or TICK stack"-like software suite). The program can also be made to send raw commands to the inverter if you choose: $ /opt/skymax/out/skymax -r POP00 # set utility output mode $ /opt/skymax/out/skymax -r POP02 # set SBU output mode $ /opt/skymax/out/skymax -r PCP00 # set utility charging mode $ /opt/skymax/out/skymax -r PCP03 # set solar only charging mode etc... These commands can of course be scripted and put into a cron job to run them at a certain time of day/week as well (say, every morning at 8am switch to solar charging mode only and SBU output mode). See this protocol manual for more commands that can be sent: http://forums.aeva.asn.au/uploads/293/HS_MS_MSX_RS232_Protocol_20140822_after_current_upgrade.pdf -------------------------------------------------------------------------------------- GNU License -------------------------------------------------------------------------------------- This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. See the file COPYING for more information.