iOS 11 ideviceinstaller, ideviceinfo not working

Question

iOS 11 ideviceinstaller, ideviceinfo not working

JonGabilondoAngulo opened this issue 7 years ago · comments

Hi,
In iOS 11 the libimobiledevice commands that need the lockdown service have stopped working.
Do you have the same problem ?
Any solution ?

Thanks

Nikias Bassen · Answer 1 · Tue Jun 06 2017 06:56:53 GMT+0800 (China Standard Time)

Haven't tried yet. Is ideviceinfo -s working? Any debug output with -d?

Satoshi Ohgoh · Answer 2 · Tue Jun 06 2017 09:39:12 GMT+0800 (China Standard Time)

Now I tried ideviceinfo command using iPhone 7 with iOS 11(15A5278f).

ideviceinfo -s is working, but -d is not.

% ideviceinfo -d
ERROR: Could not connect to lockdownd, error code -3
%

Nikias Bassen · Answer 3 · Tue Jun 06 2017 10:34:24 GMT+0800 (China Standard Time)

You didn't compile libimobiledevice with debug support. Re-configure with --enable-debug-code.

Satoshi Ohgoh · Answer 4 · Tue Jun 06 2017 11:08:07 GMT+0800 (China Standard Time)

I retry with --enable-debug-code.

In the following the data of DeviceCertificate, HostCertificate, RootCertificate are deleted and EscrowBag and other ids are modified by me.

% ideviceinfo -d
11:53:55 lockdown.c:675 lockdownd_client_new(): device udid: 1bf59ed911dc402c423e18f30ee70fd3fbedc348a
11:53:55 lockdown.c:405 lockdownd_query_type(): called
11:53:55 property_list_service.c:128 internal_plist_send(): sending 284 bytes
11:53:55 service.c:140 service_send(): sending 4 bytes
11:53:55 service.c:140 service_send(): sending 284 bytes
11:53:55 property_list_service.c:133 internal_plist_send(): sent 284 bytes
11:53:55 property_list_service.c:134 internal_plist_send(): printing 284 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Label</key>
	<string>ideviceinfo</string>
	<key>Request</key>
	<string>QueryType</string>
</dict>
</plist>
11:53:55 property_list_service.c:193 internal_plist_receive_timeout(): initial read=4
11:53:55 property_list_service.c:202 internal_plist_receive_timeout(): 297 bytes following
11:53:55 property_list_service.c:215 internal_plist_receive_timeout(): received 297 bytes
11:53:55 property_list_service.c:241 internal_plist_receive_timeout(): printing 297 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Request</key>
	<string>QueryType</string>
	<key>Type</key>
	<string>com.apple.mobile.lockdown</string>
</dict>
</plist>
11:53:55 lockdown.c:421 lockdownd_query_type(): success with type com.apple.mobile.lockdown
11:53:55 property_list_service.c:128 internal_plist_send(): sending 5035 bytes
11:53:55 service.c:140 service_send(): sending 4 bytes
11:53:55 service.c:140 service_send(): sending 5035 bytes
11:53:55 property_list_service.c:133 internal_plist_send(): sent 5035 bytes
11:53:55 property_list_service.c:134 internal_plist_send(): printing 5035 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Label</key>
	<string>ideviceinfo</string>
	<key>PairRecord</key>
	<dict>
		<key>DeviceCertificate</key>
		<data>

(deleted)

		</data>
		<key>EscrowBag</key>
		<data>
		KFuRgF3rLcsJ3Fwcu455P8rgZHq5E8d0l8R6g3V42f0=
		</data>
		<key>HostCertificate</key>
		<data>

(deleted)

		</data>
		<key>HostID</key>
		<string>2B0A7912-815A-4944-8731-3E395852052F</string>
		<key>RootCertificate</key>
		<data>

(deleted)

		</data>
		<key>SystemBUID</key>
		<string>A57D15E8-02AE-4298-B74D-56824CEE970F</string>
		<key>WiFiMACAddress</key>
		<string>18:ef:1f:e4:ea:fa</string>
	</dict>
	<key>Request</key>
	<string>ValidatePair</string>
	<key>ProtocolVersion</key>
	<string>2</string>
</dict>
</plist>
11:53:55 idevice.c:399 internal_connection_receive_timeout(): ERROR: usbmuxd_recv_timeout returned -35 (Undefined error: 0)
11:53:55 service.c:163 service_receive_with_timeout(): could not read data
11:53:55 property_list_service.c:193 internal_plist_receive_timeout(): initial read=0
11:53:55 property_list_service.c:195 internal_plist_receive_timeout(): initial read failed!
ERROR: Could not connect to lockdownd, error code -8
%

Nikias Bassen · Answer 5 · Tue Jun 06 2017 20:43:40 GMT+0800 (China Standard Time)

Hmm the device just disconnects early as it seems. Apple changed something apparently.

Nikias Bassen · Answer 6 · Tue Jun 06 2017 23:55:59 GMT+0800 (China Standard Time)

Can you try to run idevicepair unpair and paste the output of idevicepair -d pair ?

rcmpayne · Answer 7 · Wed Jun 07 2017 01:08:52 GMT+0800 (China Standard Time)

Same issue here on windows with iOS 11 beta. 10.3.3 is working without issue

libplist: 2.0.0
usbmuxd: 1.1.1
libusbmuxd: 1.1.0
git clone http://git.libimobiledevice.org/libimobiledevice.git
git pull
./autogen.sh
./configure --without-cython --enable-debug-code --prefix=/c/6.6.2017_debug
Make
Make install

C:\6.6.2017_debug>ideviceinfo.exe -s works
C:\6.6.2017_debug>ideviceinfo.exe -d fails

C:\6.6.2017_debug>idevicepair.exe unpair
SUCCESS: Unpaired with device 0dc8ad0d68e7fb8b5299c15c971c6f2c4953ba98

C:\6.6.2017_debug>idevicepair -d pair
14:01:28 lockdown.c:675 lockdownd_client_new(): device udid: 0dc8ad0d68e7fb8b5299c15c971c6f2c4953ba98
14:01:28 lockdown.c:405 lockdownd_query_type(): called
14:01:28 property_list_service.c:128 internal_plist_send(): sending 284 bytes
14:01:28 service.c:140 service_send(): sending 4 bytes
14:01:28 service.c:140 service_send(): sending 284 bytes
14:01:28 property_list_service.c:133 internal_plist_send(): sent 284 bytes
14:01:28 property_list_service.c:134 internal_plist_send(): printing 284 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Label</key>
        <string>idevicepair</string>
        <key>Request</key>
        <string>QueryType</string>
</dict>
</plist>
14:01:28 property_list_service.c:193 internal_plist_receive_timeout(): initial read=4
14:01:28 property_list_service.c:202 internal_plist_receive_timeout(): 297 bytes following
14:01:28 property_list_service.c:215 internal_plist_receive_timeout(): received 297 bytes
14:01:28 property_list_service.c:241 internal_plist_receive_timeout(): printing 297 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Request</key>
        <string>QueryType</string>
        <key>Type</key>
        <string>com.apple.mobile.lockdown</string>
</dict>
</plist>
14:01:28 lockdown.c:421 lockdownd_query_type(): success with type com.apple.mobile.lockdown
14:01:28 property_list_service.c:128 internal_plist_send(): sending 333 bytes
14:01:28 service.c:140 service_send(): sending 4 bytes
14:01:28 service.c:140 service_send(): sending 333 bytes
14:01:28 property_list_service.c:133 internal_plist_send(): sent 333 bytes
14:01:28 property_list_service.c:134 internal_plist_send(): printing 333 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Label</key>
        <string>idevicepair</string>
        <key>Key</key>
        <string>DevicePublicKey</string>
        <key>Request</key>
        <string>GetValue</string>
</dict>
</plist>
14:01:28 property_list_service.c:193 internal_plist_receive_timeout(): initial read=4
14:01:28 property_list_service.c:202 internal_plist_receive_timeout(): 914 bytes following
14:01:28 property_list_service.c:215 internal_plist_receive_timeout(): received 914 bytes
14:01:28 property_list_service.c:241 internal_plist_receive_timeout(): printing 914 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Key</key>
        <string>DevicePublicKey</string>
        <key>Request</key>
        <string>GetValue</string>
        <key>Value</key>
        <data>
        LS0tLS1CRUdJTiBSU0EgUFVCTElDIEtFWS0tLS0tCk1JSUJDZ0tDQVFFQXBXWVhCdXBX
        My9WEFRQUIKLS0tLS1F
        TkQgUlNBIFBVQkxJQyBLRVktLS0tLQo=
        </data>
</dict>
</plist>
14:01:28 lockdown.c:474 lockdownd_get_value(): success
14:01:28 lockdown.c:485 lockdownd_get_value(): has a value
14:01:28 lockdown.c:813 pair_record_generate(): device public key follows:
-----BEGIN RSA PUBLIC KEY-----
MIIBCgKCAQEApWYXBupW3/Gh50/iY32tOPeXsWzgJikNy+ylJxeXciGpFaIZ71xu
NNEEa+frB4ok6XzCnJyB0naUl3Bt4Fn7FTj1PxdTvBb4LRWj8jec2xNHY9OOBY0e
Lb6FX3f+MEyiE2oe+ce1V49MGemvVvrDTFaPUVqNMZzkUzNloaSfZg5cRDjmb27l
MZtfqis9IhdY8brO3eFoBwSia6CY9GnoovxPnMhq1967fjkiaqXoJM/LquIcLYDJ
g9z9/VlQ1a4nTeYVBrm0EDTyXG/zbxFdDPkY+oFd2ukQcp9cNsNpyP2mGD2yWs2E
GA+saQ9BV1XMW1GNGnYJQl2YR4XL/zvsFQIDAQAB
-----END RSA PUBLIC KEY-----

14:01:28 userpref.c:389 pair_record_generate_keys_and_certs(): Generating keys and certificates...
14:01:28 userpref.c:187 userpref_read_system_buid(): using 305843672103436834131978564 as SystemBUID
14:01:28 property_list_service.c:128 internal_plist_send(): sending 329 bytes
14:01:28 service.c:140 service_send(): sending 4 bytes
14:01:28 service.c:140 service_send(): sending 329 bytes
14:01:28 property_list_service.c:133 internal_plist_send(): sent 329 bytes
14:01:28 property_list_service.c:134 internal_plist_send(): printing 329 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Label</key>
        <string>idevicepair</string>
        <key>Key</key>
        <string>WiFiAddress</string>
        <key>Request</key>
        <string>GetValue</string>
</dict>
</plist>
14:01:28 property_list_service.c:193 internal_plist_receive_timeout(): initial read=4
14:01:28 property_list_service.c:202 internal_plist_receive_timeout(): 335 bytes following
14:01:28 property_list_service.c:215 internal_plist_receive_timeout(): received 335 bytes
14:01:28 property_list_service.c:241 internal_plist_receive_timeout(): printing 335 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Key</key>
        <string>WiFiAddress</string>
        <key>Request</key>
        <string>GetValue</string>
        <key>Value</key>
        <string>f0:24:75:82:a0:53</string>
</dict>
</plist>
14:01:28 lockdown.c:474 lockdownd_get_value(): success
14:01:28 lockdown.c:485 lockdownd_get_value(): has a value
14:01:28 property_list_service.c:128 internal_plist_send(): sending 4842 bytes
14:01:28 service.c:140 service_send(): sending 4 bytes
14:01:28 service.c:140 service_send(): sending 4842 bytes
14:01:28 property_list_service.c:133 internal_plist_send(): sent 4842 bytes
14:01:28 property_list_service.c:134 internal_plist_send(): printing 4842 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Label</key>
        <string>idevicepair</string>
        <key>PairRecord</key>
        <dict>
                <key>DeviceCertificate</key>
                <data>
                LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk1JSUN1akNDQWFLZ0F3SUJB
                eSszWGxZbnNiRG1wWGM2MDRrYkRJZVJqTkJDOFNRaE45Ci0tLS0tRU5EIENF
                UlRJRklDQVRFLS0tLS0K
                </data>
                <key>HostCertificate</key>
                <data>
                LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk1JSUNtekNDQVlPZ0F3SUJB
                Z0lCQURBTkJna3Foa2lHOXcwQkFRVUZBREFBTUI0WERURTNNRFl3TmpFM01E
                VWV4ZDZSSVpscDBwTEZVaHdYanViMmhpb09LQWt0ZWhOQ2pJPQotLS0tLUVO
                RCBDRVJUSUZJQ0FURS0tLS0tCg==
                </data>
                <key>RootCertificate</key>
                <data>
                LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk1JSUNqakNDQVhhZ0F3SUJB
                ZENxWXYrT29OL1RpYXE0dFhBUT09Ci0tLS0tRU5EIENFUlRJRklDQVRFLS0t
                LS0K
                </data>
                <key>SystemBUID</key>
                <string>305843672103436834131978564</string>
                <key>HostID</key>
                <string>D966B752-5AEF-08A2-390F-F35DFF0A294F</string>
        </dict>
        <key>Request</key>
        <string>Pair</string>
        <key>ProtocolVersion</key>
        <string>2</string>
        <key>PairingOptions</key>
        <dict>
                <key>ExtendedPairingErrors</key>
                <true/>
        </dict>
</dict>
</plist>
14:01:29 property_list_service.c:193 internal_plist_receive_timeout(): initial read=4
14:01:29 property_list_service.c:202 internal_plist_receive_timeout(): 316 bytes following
14:01:29 property_list_service.c:215 internal_plist_receive_timeout(): received 316 bytes
14:01:29 property_list_service.c:241 internal_plist_receive_timeout(): printing 316 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>EscrowBag</key>
        <data>
        PLO2DixMnY2291+WbnYhFv/XuUV9hAj9HYy/n3B5HAE=
        </data>
        <key>Request</key>
        <string>Pair</string>
</dict>
</plist>
14:01:29 lockdown.c:967 lockdownd_do_pair(): Pair success
14:01:29 lockdown.c:969 lockdownd_do_pair(): internal pairing mode
14:01:29 lockdown.c:978 lockdownd_do_pair(): Saving EscrowBag from response in pair record
14:01:29 lockdown.c:984 lockdownd_do_pair(): Saving WiFiAddress from device in pair record
SUCCESS: Paired with device 0dc8ad0d68e7fb8b5299c15c971c6f2c4953ba98

C:\6.6.2017_debug>>ideviceinfo.exe -d
14:04:27 lockdown.c:675 lockdownd_client_new(): device udid: 0dc8ad0d68e7fb8b5299c15c971c6f2c4953ba98
14:04:27 lockdown.c:405 lockdownd_query_type(): called
14:04:27 property_list_service.c:128 internal_plist_send(): sending 284 bytes
14:04:27 service.c:140 service_send(): sending 4 bytes
14:04:27 service.c:140 service_send(): sending 284 bytes
14:04:27 property_list_service.c:133 internal_plist_send(): sent 284 bytes
14:04:27 property_list_service.c:134 internal_plist_send(): printing 284 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Label</key>
        <string>ideviceinfo</string>
        <key>Request</key>
        <string>QueryType</string>
</dict>
</plist>
14:04:27 property_list_service.c:193 internal_plist_receive_timeout(): initial read=4
14:04:27 property_list_service.c:202 internal_plist_receive_timeout(): 297 bytes following
14:04:27 property_list_service.c:215 internal_plist_receive_timeout(): received 297 bytes
14:04:27 property_list_service.c:241 internal_plist_receive_timeout(): printing 297 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Request</key>
        <string>QueryType</string>
        <key>Type</key>
        <string>com.apple.mobile.lockdown</string>
</dict>
</plist>
14:04:27 lockdown.c:421 lockdownd_query_type(): success with type com.apple.mobile.lockdown
14:04:27 property_list_service.c:128 internal_plist_send(): sending 4915 bytes
14:04:27 service.c:140 service_send(): sending 4 bytes
14:04:27 service.c:140 service_send(): sending 4915 bytes
14:04:27 property_list_service.c:133 internal_plist_send(): sent 4915 bytes
14:04:27 property_list_service.c:134 internal_plist_send(): printing 4915 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Label</key>
        <string>ideviceinfo</string>
        <key>PairRecord</key>
        <dict>
                <key>DeviceCertificate</key>
                <data>
                LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk1JSUN1akNDQWFLZ0F3SUJB
                 eSszWGxZbnNiRG1wWGM2MDRrYkRJZVJqTkJDOFNRaE45Ci0tLS0tRU5EIENF
                UlRJRklDQVRFLS0tLS0K
                </data>
                <key>HostCertificate</key>
                <data>
                LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk1JSUNtekNDQVlPZ0F3SUJB
                VWV4ZDZSSVpscDBwTEZVaHdYanViMmhpb09LQWt0ZWhOQ2pJPQotLS0tLUVO
                RCBDRVJUSUZJQ0FURS0tLS0tCg==
                </data>
                <key>RootCertificate</key>
                <data>
                LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk1JSUNqakNDQVhhZ0F3SUJB
                ZENxWXYrT29OL1RpYXE0dFhBUT09Ci0tLS0tRU5EIENFUlRJRklDQVRFLS0t
                LS0K
                </data>
                <key>SystemBUID</key>
                <string>305843672103436834131978564</string>
                <key>HostID</key>
                <string>D966B752-5AEF-08A2-390F-F35DFF0A294F</string>
                <key>EscrowBag</key>
                <data>
                PLO2DixMnY2291+WbnYhFv/XuUV9hAj9HYy/n3B5HAE=
                </data>
                <key>WiFiMACAddress</key>
                <string>f0:24:75:82:a0:53</string>
        </dict>
        <key>Request</key>
        <string>ValidatePair</string>
        <key>ProtocolVersion</key>
        <string>2</string>
</dict>
</plist>
14:04:27 idevice.c:399 internal_connection_receive_timeout(): ERROR: usbmuxd_recv_timeout returned -11 (No error)
14:04:27 service.c:163 service_receive_with_timeout(): could not read data
14:04:27 property_list_service.c:193 internal_plist_receive_timeout(): initial read=0
14:04:27 property_list_service.c:195 internal_plist_receive_timeout(): initial read failed!
ERROR: Could not connect to lockdownd, error code -8

Satoshi Ohgoh · Answer 8 · Wed Jun 07 2017 08:17:05 GMT+0800 (China Standard Time)

I tried. It seems to be successful.

idevicepair unpair

% idevicepair unpair
SUCCESS: Unpaired with device 1b659ed991dc402c423e18f30ee70fd3fbedc38f
%

idevicepair -d pair

% idevicepair -d pair
09:03:41 lockdown.c:675 lockdownd_client_new(): device udid: 1b659ed991dc402c423e18f30ee70fd3fbedc38f
09:03:41 lockdown.c:405 lockdownd_query_type(): called
09:03:41 property_list_service.c:128 internal_plist_send(): sending 284 bytes
09:03:41 service.c:140 service_send(): sending 4 bytes
09:03:41 service.c:140 service_send(): sending 284 bytes
09:03:41 property_list_service.c:133 internal_plist_send(): sent 284 bytes
09:03:41 property_list_service.c:134 internal_plist_send(): printing 284 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Label</key>
        <string>idevicepair</string>
        <key>Request</key>
        <string>QueryType</string>
</dict>
</plist>
09:03:41 property_list_service.c:193 internal_plist_receive_timeout(): initial read=4
09:03:41 property_list_service.c:202 internal_plist_receive_timeout(): 297 bytes following
09:03:41 property_list_service.c:215 internal_plist_receive_timeout(): received 297 bytes
09:03:41 property_list_service.c:241 internal_plist_receive_timeout(): printing 297 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Request</key>
        <string>QueryType</string>
        <key>Type</key>
        <string>com.apple.mobile.lockdown</string>
</dict>
</plist>
09:03:41 lockdown.c:421 lockdownd_query_type(): success with type com.apple.mobile.lockdown
09:03:41 property_list_service.c:128 internal_plist_send(): sending 333 bytes
09:03:41 service.c:140 service_send(): sending 4 bytes
09:03:41 service.c:140 service_send(): sending 333 bytes
09:03:41 property_list_service.c:133 internal_plist_send(): sent 333 bytes
09:03:41 property_list_service.c:134 internal_plist_send(): printing 333 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Label</key>
        <string>idevicepair</string>
        <key>Key</key>
        <string>DevicePublicKey</string>
        <key>Request</key>
        <string>GetValue</string>
</dict>
</plist>
09:03:41 property_list_service.c:193 internal_plist_receive_timeout(): initial read=4
09:03:41 property_list_service.c:202 internal_plist_receive_timeout(): 914 bytes following
09:03:41 property_list_service.c:215 internal_plist_receive_timeout(): received 914 bytes
09:03:41 property_list_service.c:241 internal_plist_receive_timeout(): printing 914 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Key</key>
        <string>DevicePublicKey</string>
        <key>Request</key>
        <string>GetValue</string>
        <key>Value</key>
        <data>

(---cut---)

        </data>
</dict>
</plist>
09:03:41 lockdown.c:474 lockdownd_get_value(): success
09:03:41 lockdown.c:485 lockdownd_get_value(): has a value
09:03:41 lockdown.c:813 pair_record_generate(): device public key follows:
-----BEGIN RSA PUBLIC KEY-----
(---cut---)
-----END RSA PUBLIC KEY-----

09:03:41 userpref.c:389 pair_record_generate_keys_and_certs(): Generating keys and certificates...
09:03:41 userpref.c:187 userpref_read_system_buid(): using A59D14F8-02AE-4298-B74D-56824CEE970F as SystemBUID
09:03:41 property_list_service.c:128 internal_plist_send(): sending 329 bytes
09:03:41 service.c:140 service_send(): sending 4 bytes
09:03:41 service.c:140 service_send(): sending 329 bytes
09:03:41 property_list_service.c:133 internal_plist_send(): sent 329 bytes
09:03:41 property_list_service.c:134 internal_plist_send(): printing 329 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Label</key>
        <string>idevicepair</string>
        <key>Key</key>
        <string>WiFiAddress</string>
        <key>Request</key>
        <string>GetValue</string>
</dict>
</plist>
09:03:41 property_list_service.c:193 internal_plist_receive_timeout(): initial read=4
09:03:41 property_list_service.c:202 internal_plist_receive_timeout(): 335 bytes following
09:03:41 property_list_service.c:215 internal_plist_receive_timeout(): received 335 bytes
09:03:41 property_list_service.c:241 internal_plist_receive_timeout(): printing 335 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Key</key>
        <string>WiFiAddress</string>
        <key>Request</key>
        <string>GetValue</string>
        <key>Value</key>
        <string>81:e1:7e:e4:ea:e2</string>
</dict>
</plist>
09:03:41 lockdown.c:474 lockdownd_get_value(): success
09:03:41 lockdown.c:485 lockdownd_get_value(): has a value
09:03:41 property_list_service.c:128 internal_plist_send(): sending 4851 bytes
09:03:41 service.c:140 service_send(): sending 4 bytes
09:03:41 service.c:140 service_send(): sending 4851 bytes
09:03:41 property_list_service.c:133 internal_plist_send(): sent 4851 bytes
09:03:41 property_list_service.c:134 internal_plist_send(): printing 4851 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Label</key>
        <string>idevicepair</string>
        <key>PairRecord</key>
        <dict>
                <key>DeviceCertificate</key>
                <data>
(---cut---)
                </data>
                <key>HostCertificate</key>
                <data>
(---cut---)
                </data>
                <key>RootCertificate</key>
                <data>
(---cut---)
                </data>
                <key>SystemBUID</key>
                <string>A59D14F8-02AE-4298-B74D-56824CEE970F</string>
                <key>HostID</key>
                <string>7B0787C1-7A5B-9D5D-0C26-77A7F59E4A18</string>
        </dict>
        <key>Request</key>
        <string>Pair</string>
        <key>ProtocolVersion</key>
        <string>2</string>
        <key>PairingOptions</key>
        <dict>
                <key>ExtendedPairingErrors</key>
                <true/>
        </dict>
</dict>
</plist>
09:03:42 property_list_service.c:193 internal_plist_receive_timeout(): initial read=4
09:03:42 property_list_service.c:202 internal_plist_receive_timeout(): 316 bytes following
09:03:42 property_list_service.c:215 internal_plist_receive_timeout(): received 316 bytes
09:03:42 property_list_service.c:241 internal_plist_receive_timeout(): printing 316 bytes plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>EscrowBag</key>
        <data>
        /AIWwoNXU/VzFKTEeGl9gU0DhuuY/QbkHeVS1N1uYla=
        </data>
        <key>Request</key>
        <string>Pair</string>
</dict>
</plist>
09:03:42 lockdown.c:967 lockdownd_do_pair(): Pair success
09:03:42 lockdown.c:969 lockdownd_do_pair(): internal pairing mode
09:03:42 lockdown.c:978 lockdownd_do_pair(): Saving EscrowBag from response in pair record
09:03:42 lockdown.c:984 lockdownd_do_pair(): Saving WiFiAddress from device in pair record
SUCCESS: Paired with device 1b659ed991dc402c423e18f30ee70fd3fbedc38f
%

Satoshi Ohgoh · Answer 9 · Wed Jun 07 2017 10:23:28 GMT+0800 (China Standard Time)

It seems that response failed at line 730 of lockdown.c and the response is returning with LOCKDOWN_E_ESCROW_LOCKED (-35).
Temporarily commenting out will make ideviceinfo successful.

     /* in any case, we need to validate pairing to receive trusted host status */
     ret = lockdownd_validate_pair(client_loc, NULL);

Nikias Bassen · Answer 10 · Wed Jun 07 2017 15:10:26 GMT+0800 (China Standard Time)

The ValidatePair request was removed from iOS lockdownd, so it doesn't understand it. It will return that the command is invalid.
Commenting that line in lockdown.c out will make it work when the device is already paired, yes. Since we need to keep backwards compatibility I need to work out a solution that works in all cases.

EliyahuStern · Answer 11 · Wed Jun 07 2017 20:21:50 GMT+0800 (China Standard Time)

How about:

Add a version double to idevice struct.
Initialize it inside get_device_info (if it is simple).
in lockdownd_client_new_with_handshake:
- if os version is not set, call get_device_info(simple).
- skip lockdownd_validate_pair call in in case version >= 11.0.

Nikias Bassen · Answer 12 · Wed Jun 07 2017 20:53:09 GMT+0800 (China Standard Time)

@EliyahuStern generally yes, just need to make sure the actual pairing works with the open source usbmuxd for a new pairing.
Even for < 11 it actually works without validatepair (since starting a session only works with a correct pairing).

Josef Micka · Answer 13 · Thu Jun 08 2017 00:07:08 GMT+0800 (China Standard Time)

@nikias just installed ios 11 beta little while ago, and found that my code is not working (early disconnect after validate pair), so i checked with libimobile and same issue.
then i decided to look at github, and see you are already working on it.

i still plan to do communication capture (with hardware usb monitor), since itunes for windows seems to be working with ios11 beta.

they might have something up in the sleeves, that makes seamless communication with old and new devices possible 🐱

Nikias Bassen · Answer 14 · Thu Jun 08 2017 00:56:45 GMT+0800 (China Standard Time)

@mexmer as I said, ValidatePair is technically not required even for older devices. At some point IIRC it was required to gain trusted host status (ideviceinfo -k TrustedHostAttached), but at least on iOS 5.0.1 it is true without performing ValidatePair.

Josef Micka · Answer 15 · Thu Jun 08 2017 01:01:29 GMT+0800 (China Standard Time)

i would probly leave it in my app for elder devices, but seems that ios 11 works without it. will need to redo session start handling tho', (i have different workflow that libimobile tools, and some stuff is running in paralel )

i still plan to check itunes communication.

not sending validatepair saves one roundtrip tho' 😄

Nikias Bassen · Answer 16 · Thu Jun 08 2017 10:32:07 GMT+0800 (China Standard Time)

Ok I found an even older device with iOS 4.2.1 and this one actually expects ValidatePair. Since the oss usbmuxd actually handles all pre-iOS 7 devices separately, there is no change required for a previously unknown device. However if the device is already paired - and this also applies to the official usbmuxd - we still have to call ValidatePair to get trusted host status.

EliyahuStern · Answer 17 · Thu Jun 08 2017 14:44:05 GMT+0800 (China Standard Time)

Sounds like ValidatePair can be called only as a fallback for failed sessions (maybe after checking the os version).

Josef Micka · Answer 18 · Thu Jun 08 2017 17:01:28 GMT+0800 (China Standard Time)

Nope, like nikias said, preios 5 devices require validatepair. While ios11 disconnects you, when you send validaterepair

Josef Micka · Answer 19 · Thu Jun 08 2017 17:02:45 GMT+0800 (China Standard Time)

Thought my ipad with ios5 tends to reject session, if i don't use validate pair before secure service start

Nikias Bassen · Answer 20 · Fri Jun 09 2017 00:59:27 GMT+0800 (China Standard Time)

@mexmer oh hmm... so if you do ideviceinfo -k TrustedHostAttached will it show false in that case?

Josef Micka · Answer 21 · Fri Jun 09 2017 01:28:35 GMT+0800 (China Standard Time)

is there usbmuxd available with this modification already? i'm talking about my app, that communicates with iDevice directly (trough USB endpoints)

i'm not sure about cause of this issue, but sometimes i get invalidhostid if i don't do validatepair, from ios 5.

Nikias Bassen · Answer 22 · Fri Jun 09 2017 06:53:00 GMT+0800 (China Standard Time)

oh hm. maybe I need to do some more testing then. The open source usbmuxd does not require any changes since for versions before 7 it will call validate pair for a new pairing. For known devices the code change has to be in libimobiledevice to make sure validatepair is called for older devices.

Josef Micka · Answer 23 · Fri Jun 09 2017 15:57:22 GMT+0800 (China Standard Time)

I will let you know, if i find out more. For now i "fixed" that in my app by calling validatepair for all pre trust (ios7) devices.

Nikias Bassen · Answer 24 · Fri Jun 09 2017 20:30:51 GMT+0800 (China Standard Time)

I came up with this solution:
https://gist.github.com/nikias/b351bf633d62703e0ff4f2fee9628401

Josef Micka · Answer 25 · Fri Jun 09 2017 20:56:02 GMT+0800 (China Standard Time)

thanks i will check that.

Satoshi Ohgoh · Answer 26 · Mon Jun 12 2017 09:47:03 GMT+0800 (China Standard Time)

I tried @nikias 's patch with the following devices and iOS version, ideviceinfo worked in all combinations. (:-)

iPhone 4S, iOS 6.1.2
iPhone 5, iOS 6.1.4
iPhone 6, iOS 10.3.1
iPhone 7, iOS 11 beta

Josef Micka · Answer 27 · Tue Jun 13 2017 15:33:04 GMT+0800 (China Standard Time)

looks fine.
iPad 1stGen - iOS 5.1.1
iPhone 2G - iOS 3.1.2

rekyagis · Answer 28 · Wed Jun 14 2017 14:25:38 GMT+0800 (China Standard Time)

@nikias 's patch works well with following devices / iOS versions:
iPhone 3GS with iOS 4.2.1
iPhone 5c with iOS 7.1.2
iPhone 6 with iOS 8.4.1
iPhone 6 Plus with iOS 9.3.5

Thank you for nice solution.

VasilijSviridov · Answer 29 · Wed Jun 14 2017 16:19:49 GMT+0800 (China Standard Time)

are you going to make it global ? do I have to update libimobiledevice with brew ?

Any help ?

José Carlos · Answer 30 · Sun Jun 18 2017 08:31:12 GMT+0800 (China Standard Time)

I have tested the patch, and now ifuse is working (tested on iPhone 6 Plus with iOS 11), but in the other hand, if a try to validate (idevicepair validate) a pairing a get a usbmuxd error, but now I can pair my iPhone without problem.

Maybe the problem came from here?:

if (LOCKDOWN_E_SUCCESS == ret) {

  		ret = lockdownd_validate_pair(client_loc, NULL);

```
  	}
```

Because your calling the same function very quickly...

Nikias Bassen · Answer 31 · Sun Jun 18 2017 09:19:32 GMT+0800 (China Standard Time)

You can't call lockdownd_validate_pair on iOS 11 because Apple removed the ValidatePair command, it will make the device report an error. I will make a workaround for the idevicepair validate command.
Though actually the idevicepair utility is not really required anymore, since usbmuxd is handling the device pairing.

hugozerken · Answer 32 · Mon Jun 26 2017 21:06:20 GMT+0800 (China Standard Time)

thx I have use ideviceinstaller successfully!!!
but the configure and make process still have a fill step should avoid
hope someday the installation could be much more smooth in macos
I do search but a lot of answser is based on Ubuntu

truonggiang0710 · Answer 33 · Tue Jun 27 2017 18:41:20 GMT+0800 (China Standard Time)

Hi @nikias !
I just modify as your advice.
I remove all file at /var/lib/lockdown. Then I run to get information, it request Trust. I touch Trust and get information successful. But
When I unplug and plug phone again. It still request Trust. Can you tell me why, please ?
On iOS 10.3.2, the issue does not appear !

Thanks a lot

Stephane Mercier · Answer 34 · Fri Jul 07 2017 18:40:55 GMT+0800 (China Standard Time)

Hi, are there any updates regarding this issue? I see there is a patch but it is not clear to me what is missing for a tool like robovm, which uses libimobiledevice and has this "LOCKDOWN_E_PLIST_ERROR" for now.
I am a basic user, so I might just have missed something ;)
Thanks for the great work anyway.

Nikias Bassen · Answer 35 · Fri Jul 07 2017 20:32:20 GMT+0800 (China Standard Time)

@stephkenzo robovm needs to use a newer libimobiledevice with that patch included.

Stephane Mercier · Answer 36 · Mon Jul 10 2017 18:09:24 GMT+0800 (China Standard Time)

@nikias Thanks a lot for your answer. Just curious, what remains to be done in this issue to close it?

Nikias Bassen · Answer 37 · Mon Jul 10 2017 18:41:18 GMT+0800 (China Standard Time)

I am not 100% satisfied with my patch somehow, so I am trying to come up with something that I like more...

pmnordkvist · Answer 38 · Mon Jul 10 2017 19:09:37 GMT+0800 (China Standard Time)

Great work @nikias Please let us know if you need help with testing or otherwise.

Stephane Mercier · Answer 39 · Wed Jul 12 2017 01:50:49 GMT+0800 (China Standard Time)

Hi @nikias , what are the changes still to be made? Is there any way to help?

Stefan Oltmann · Answer 40 · Wed Jul 26 2017 16:49:37 GMT+0800 (China Standard Time)

@nikias Can we go with your patch? We'll soon need a new RoboVM version that supports iOS 11.

腹黒い茶 · Answer 41 · Thu Aug 03 2017 00:49:40 GMT+0800 (China Standard Time)

Try this with iOS 11, this use the patch from @nikias

brew install https://gist.github.com/Haraguroicha/0dee2ee29c7376999178c5392080c16e/raw/libimobiledevice.rb --HEAD --with-ios11

Jay Freeman (saurik) · Answer 42 · Sat Aug 12 2017 15:17:05 GMT+0800 (China Standard Time)

@nikias Do you have reason to believe your patch is actively harmful? If not, maybe it would be good idea to commit it to the repository, as you can always come up with a better solution later?

Nikias Bassen · Answer 43 · Sun Aug 13 2017 06:17:24 GMT+0800 (China Standard Time)

@saurik you are right, it's not harmful so I finally committed it: 5a85432

truonggiang0710 · Answer 44 · Tue Aug 29 2017 09:31:50 GMT+0800 (China Standard Time)

Hi @nikias, Do you know about my issue ?

I just modify as your advice.
I remove all file at /var/lib/lockdown. Then I run to get information, it request Trust. I touch Trust and get information successful. But
When I unplug and plug phone again. It still request Trust. Can you tell me why, please ?
On iOS 10.3.2, the issue does not appear !

Thanks a lot

EdgarsAvotins · Answer 45 · Mon Nov 27 2017 21:02:28 GMT+0800 (China Standard Time)

Haraguroicha commented on 2 Aug • edited

Try this with iOS 11, this use the patch from @nikias
brew install https://gist.github.com/Haraguroicha/0dee2ee29c7376999178c5392080c16e/raw/libimobiledevice.rb --HEAD --with-ios11

Why did this massage have no likes? Was wondering how to apply the patch and this helped. Although I deleted the --with-ios11 part, because it was failing otherwise. So the commands I used are:

brew uninstall libimobiledevice
brew install https://gist.github.com/Haraguroicha/0dee2ee29c7376999178c5392080c16e/raw/libimobiledevice.rb --HEAD

Uninstalled libimobiledevice and reinstalled it with the changes from the patch.
I'm not experienced in this, so if I wrote something dumb, feel free to point it out, so that me and others can learn from my mistakes :)

腹黒い茶 · Answer 46 · Tue Nov 28 2017 10:33:24 GMT+0800 (China Standard Time)

@EdgarsAvotins Because that patch was come from @nikias and only is a workaround, not to confirm it was safe yet.