Python: OnReadSample() is called with error status: -1072875772
jackbrookes opened this issue · comments
Attempting to run any of the Python scripts returns an error (even after unlocking device via .exe).
python .\minimumExample.py
Output:
[ WARN:1] videoio(MSMF): OnReadSample() is called with error status: -1072875772
[ WARN:1] videoio(MSMF): async ReadSample() call is failed with error status: -1072875772
[ WARN:2] videoio(MSMF): can't grab frame. Error: -1072875772
[ WARN:2] videoio(MSMF): can't grab frame. Error: -2147483638
Exiting Leap Image Thread!
[ WARN:0] terminating async callback
My system:
Python 3.7.1 64bit
Windows 10
Installed packages numpy+mkl, scipy, opencv-python, and opencv-contrib-python.
I can confirm I have the exact same issues. The firmware was updated, but after that there are also bandwidth warnings on occasion, even on USB 3.0.
Using Python 3.6.7, but otherwise the data is the same.
I can confirm I have the exact same issues. The firmware was updated, but after that there are also bandwidth warnings on occasion, even on USB 3.0.
Using Python 3.6.7, but otherwise the data is the same.
I managed to get around the issue, I uninstalled the LM driver via Device Manager, and reinstalled. I also made sure the LM Control Panel app was NOT running. Now, it seems to work fine. Not sure which fixed it.
I had the same issue, but uninstalling and reinstalling the driver and not running the Control Panel just leeds to an similar issue in my case:
python .\cameraControlExample.py
Output:
[ WARN:1] videoio(MSMF): can't grab frame. Error: -2147483638
Exiting Leap Image Thread!
Did you use any specific driver?
btw. I had to change:
leap = leapuvc.leapImageThread() to leap = leapuvc.leapImageThread(source = 1)
otherwise the script was using my laptops built-in camera.
[ WARN:1] videoio(MSMF): can't grab frame. Error: -2147483638 Exiting Leap Image Thread!
OK so I had this error too - seems to show up when there are other cameras attached to the PC. So to fix this, I disabled the Vive Cam as well as my built-in webcam in device manager.
Ok disabling the built-in camera leads me to another error:
Exception in thread Thread-1:
Traceback (most recent call last):
File "C:\Users\Dell9560\AppData\Local\Programs\Python\Python36\lib\threading.py", line 916, in _bootstrap_inner
self.run()
File "C:\Users\Dell9560\Work\Vendors\leapuvc-master\Python\leapuvc.py", line 40, in run
frame = np.reshape(frame, (self.resolution[1], self.resolution[0]*2))
File "C:\Users\Dell9560\AppData\Local\Programs\Python\Python36\lib\site-packages\numpy\core\fromnumeric.py", line 279, in reshape
return _wrapfunc(a, 'reshape', newshape, order=order)
File "C:\Users\Dell9560\AppData\Local\Programs\Python\Python36\lib\site-packages\numpy\core\fromnumeric.py", line 51, in _wrapfunc
return getattr(obj, method)(*args, **kwds)
ValueError: cannot reshape array of size 921600 into shape (480,1280)
Did you also had any similar problem? I will have a look at the resolutions, maybe I can fix that.
To make the can't grab frame errors to go away you need to pause the tracking. You could close the control panel, but pausing is enough. Unfortunately it doesn't solve my problem, as I then get only black images with the minimal example, maybe related to #5 . When I hit q, I get
Exiting Leap Image Thread! [ WARN:1] terminating async callback
Uninstalling the device in device manager and reinstalling the software didn't solve the problem. Just the Name of the device changed. Before it was LeapMotion Devkit or something, and now it's 'Leap Motion Controller'
Win10, Python 3.7.2, Software-Version: 4.0.0+52173, Firmware Revision: 1.7.1
EDIT: Nevermind. Now that it's daylight I see that the screens are black because of the low exposure. So it works. I think this issue is resolved with the solution of pausing the tracking in the control panel.
Can't get the infrared LED to light up after pausing tracking in Leap control panel.
Tried leap.setLeftLED(True) and return true but no effect
@mstranne have you ever solved the following issue?
"ValueError: cannot reshape array of size 921600 into shape (480,1280)"
i figured it out. problem was most probably due to not correct camera access. i noticed that this happens when i have my build-in camera from the notebook disabled. as soon as i have enabled it, the error went away.
also i have tested the leapuvc cam on the recent Raspbian Buster (kernel 4.19) where it worked (but not every setting was supported). it worked as well on Windows 8 and Ubuntu 16.04. it didn't work on Ubuntu 14.04, therefore i guess it needs a certain kernel version (on Debian).
minimumExample.py
Process finished with exit code -1
or i keep getting when I run firmware.exe
[Critical] Device stopped sending frames. Attempting to restart streaming.
[Critical] Device stopped sending frames. Attempting to restart streaming.
or usually it shows
Exiting Leap Image Thread!
can anyone please help me solve this issue?
I solved it by allowing settings---> control panel ----> camera ----> allow desktop app to access your camera e.g. pythonw
then run the script from pythonw.
sorry I began python coding 6 months ago.
Hello! I try to display the ultraleap frame with the leapuvc but i have the same problem: Exiting leap image Thread!
I had the same error with source=1 or 0