solution exception: index out of range 1

Question

solution exception: index out of range 1

zhangzhennico opened this issue 7 years ago · comments

I have an issue "solution exception: index out of range 1" when I try to run the open studio energy simulation to calculate indoor PMV comfort. and I check all the components and still can not find the reasons. Could you help me check it?
Many thanks for all your help and my definition is attached with this issue post.

Devang · Answer 1 · Thu Sep 14 2017 17:00:45 GMT+0800 (China Standard Time)

@zhangzhennico,
I don't see your definition. Can you please re-attach. I can take a look.

NICOLE · Answer 2 · Tue Sep 19 2017 22:59:03 GMT+0800 (China Standard Time)

VERNACULAR PROTOTYPE_B_Indoor_PMV_Comfort.zip
@devngc sorry for my late reply and I have attached my definition here. Thanks a lot.

Chris Mackey · Answer 3 · Wed Sep 20 2017 14:47:17 GMT+0800 (China Standard Time)

@zhangzhennico ,
You did not intersect your zone masses before turning them into HBZones and one of your zones had an interior surface inside of it. Please watch all of the tutorial videos on the geometry rules of E+ before posting to any forum:
https://www.youtube.com/watch?v=cDvBWDA0aF0&index=10&list=PLruLh1AdY-SgW4uDtNSMLeiUmA8YXEHT_

Also, in the future, issues like this that aren't bugs in the software should be posted to the Forum after you have searched the discussions there to see if your issue has already been addressed:
http://discourse.ladybug.tools/
-Chris
https://www.dropbox.com/s/qrc7i0mcw65jf3h/VERNACULAR%20PROTOTYPE_B_Indoor_PMV_Comfort_CWM.gh?dl=0

NICOLE · Answer 4 · Wed Sep 20 2017 18:31:41 GMT+0800 (China Standard Time)

Noted, many thanks for all your help.

…

Sent from my iPhone

On 20 Sep 2017, at 2:47 PM, Chris Mackey ***@***.***> wrote: @zhangzhennico , You did not intersect your zone masses before turning them into HBZones and one of your zones had an interior surface inside of it. Please watch all of the tutorial videos on the geometry rules of E+ before posting to any forum: https://www.youtube.com/watch?v=cDvBWDA0aF0&index=10&list=PLruLh1AdY-SgW4uDtNSMLeiUmA8YXEHT_ Also, in the future, issues like this that aren't bugs in the software should be posted to the Forum after you have searched the discussions there to see if your issue has already been addressed: http://discourse.ladybug.tools/ -Chris https://www.dropbox.com/s/qrc7i0mcw65jf3h/VERNACULAR%20PROTOTYPE_B_Indoor_PMV_Comfort_CWM.gh?dl=0 — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or mute the thread.