docs | |
---|---|
tests | |
package |
This plugin produces coverage reports. It supports centralised testing and distributed testing in both load and each modes. It also supports coverage of subprocesses.
All features offered by the coverage package should be available, either through pytest-cov or through coverage's config file.
- Free software: MIT license
Install with pip:
pip install pytest-cov
For distributed testing support install pytest-xdist:
pip install pytest-xdist
pytest-cov 2.0 is using a new .pth
file (pytest-cov.pth
). You may want to manually remove the older
init_cov_core.pth
from site-packages as it's not automatically removed.
Uninstall with pip:
pip uninstall pytest-cov
Under certain scenarios a stray .pth
file may be left around in site-packages.
- pytest-cov 2.0 may leave a
pytest-cov.pth
if you installed without wheels (easy_install
,setup.py install
etc). - pytest-cov 1.8 or older will leave a
init_cov_core.pth
.
Centralised testing will report on the combined coverage of the main process and all of its subprocesses.
Running centralised testing:
py.test --cov=myproj tests/
Shows a terminal report:
-------------------- coverage: platform linux2, python 2.6.4-final-0 --------------------- Name Stmts Miss Cover ---------------------------------------- myproj/__init__ 2 0 100% myproj/myproj 257 13 94% myproj/feature4286 94 7 92% ---------------------------------------- TOTAL 353 20 94%
Distributed testing with dist mode set to load will report on the combined coverage of all slaves. The slaves may be spread out over any number of hosts and each slave may be located anywhere on the file system. Each slave will have its subprocesses measured.
Running distributed testing with dist mode set to load:
py.test --cov=myproj -n 2 tests/
Shows a terminal report:
-------------------- coverage: platform linux2, python 2.6.4-final-0 --------------------- Name Stmts Miss Cover ---------------------------------------- myproj/__init__ 2 0 100% myproj/myproj 257 13 94% myproj/feature4286 94 7 92% ---------------------------------------- TOTAL 353 20 94%
Again but spread over different hosts and different directories:
py.test --cov=myproj --dist load --tx ssh=memedough@host1//chdir=testenv1 --tx ssh=memedough@host2//chdir=/tmp/testenv2//python=/tmp/env1/bin/python --rsyncdir myproj --rsyncdir tests --rsync examples tests/
Shows a terminal report:
-------------------- coverage: platform linux2, python 2.6.4-final-0 --------------------- Name Stmts Miss Cover ---------------------------------------- myproj/__init__ 2 0 100% myproj/myproj 257 13 94% myproj/feature4286 94 7 92% ---------------------------------------- TOTAL 353 20 94%
Distributed testing with dist mode set to each will report on the combined coverage of all slaves. Since each slave is running all tests this allows generating a combined coverage report for multiple environments.
Running distributed testing with dist mode set to each:
py.test --cov=myproj --dist each --tx popen//chdir=/tmp/testenv3//python=/usr/local/python27/bin/python --tx ssh=memedough@host2//chdir=/tmp/testenv4//python=/tmp/env2/bin/python --rsyncdir myproj --rsyncdir tests --rsync examples tests/
Shows a terminal report:
---------------------------------------- coverage ---------------------------------------- platform linux2, python 2.6.5-final-0 platform linux2, python 2.7.0-final-0 Name Stmts Miss Cover ---------------------------------------- myproj/__init__ 2 0 100% myproj/myproj 257 13 94% myproj/feature4286 94 7 92% ---------------------------------------- TOTAL 353 20 94%
It is possible to generate any combination of the reports for a single test run.
The available reports are terminal (with or without missing line numbers shown), HTML, XML and annotated source code.
The terminal report without line numbers (default):
py.test --cov-report term --cov=myproj tests/ -------------------- coverage: platform linux2, python 2.6.4-final-0 --------------------- Name Stmts Miss Cover ---------------------------------------- myproj/__init__ 2 0 100% myproj/myproj 257 13 94% myproj/feature4286 94 7 92% ---------------------------------------- TOTAL 353 20 94%
The terminal report with line numbers:
py.test --cov-report term-missing --cov=myproj tests/ -------------------- coverage: platform linux2, python 2.6.4-final-0 --------------------- Name Stmts Miss Cover Missing -------------------------------------------------- myproj/__init__ 2 0 100% myproj/myproj 257 13 94% 24-26, 99, 149, 233-236, 297-298, 369-370 myproj/feature4286 94 7 92% 183-188, 197 -------------------------------------------------- TOTAL 353 20 94%
These three report options output to files without showing anything on the terminal:
py.test --cov-report html --cov-report xml --cov-report annotate --cov=myproj tests/
The final report option can also suppress printing to the terminal:
py.test --cov-report= --cov=myproj tests/
This mode can be especially useful on continuous integration servers, where a coverage file is needed for subsequent processing, but no local report needs to be viewed. For example, tests run on Travis-CI could produce a .coverage file for use with Coveralls.
The data file is erased at the beginning of testing to ensure clean data for each test run. If you
need to combine the coverage of several test runs you can use the --cov-append
option to append
this coverage data to coverage data from previous test runs.
The data file is left at the end of testing so that it is possible to use normal coverage tools to examine it.
This plugin provides a clean minimal set of command line options that are added to pytest. For further control of coverage use a coverage config file.
For example if tests are contained within the directory tree being measured the tests may be excluded if desired by using a .coveragerc file with the omit option set:
py.test --cov-config .coveragerc --cov=myproj myproj/tests/
Where the .coveragerc file contains file globs:
[run] omit = tests/*
For full details refer to the coverage config file documentation.
Note that this plugin controls some options and setting the option in the config file will have no effect. These include specifying source to be measured (source option) and all data file handling (data_file and parallel options).
For distributed testing the slaves must have the pytest-cov package installed. This is needed since the plugin must be registered through setuptools for pytest to start the plugin on the slave.
For subprocess measurement environment variables must make it from the main process to the subprocess. The python used by the subprocess must have pytest-cov installed. The subprocess must do normal site initialisation so that the environment variables can be detected and coverage started.
Whilst this plugin has been built fresh from the ground up it has been influenced by the work done on pytest-coverage (Ross Lawley, James Mills, Holger Krekel) and nose-cover (Jason Pellerin) which are other coverage plugins.
Ned Batchelder for coverage and its ability to combine the coverage results of parallel runs.
Holger Krekel for pytest with its distributed testing support.
Jason Pellerin for nose.
Michael Foord for unittest2.
No doubt others have contributed to these tools as well.