Janak's repositories
FEA_Composite_laminate_plates
A code for the linear static and modal analysis of laminate composite plates using the Kirchoff-Love theory of thin plates and the laminate composites theory. The supported geometry is a rectangular plate with or without one hole.
Meshfree-Modelling-of-Thin-Plate-Bending-Using-Reproducing-Kernel-Particle-Method-RKPM-
Comparison study between numerical methods using MATLAB - Finite Element Method (FEM) & RKPM
Aero-matlab
My matlab homework files
ArcLengthMethod
Arc-length method using an extrapolated predictor
Global-Ship-Hull-Structural-Analysis-Based-on-the-Finite-Element-Method
The goal of this project is to develop and analyze a structural model of a tanker midship block using the commercial software Ansys Mechanical ADPL. The block under consideration is 30 m long and structurally streamlined to accommodate this circumstance study. To enhance the seal, a watertight bulkhead with a cross-section of X=0 m was installed. T
hydrofoil-stability
Matlab/Octave code for the calculation of Eignemodes / Eigenvectors of an inverted "T" hydrofoil at high speed
NumericalComputation
搜集一些数值计算开源项目,并且复现它们
opendatasets
A curated collection of datasets for data analysis & machine learning, downloadable with a single Python command
phd
PhD Dissertation: Analysis of Surface Cracks in Plates Loaded in Bending under Elastic-Plastic and Fully-Plastic Conditions
PTFEM
Matlab code for FE analysis under 2D axisymmetric stress condition.
Rectangular-Plate-with-hole
The follwoing Ansys APDL-Code shows the FEM-Simulation of a rectangular Plate with a hole
Reliability_Analysis_of_Stiffened_Kirchhoff-s_Plate
The reliability analysis is studied for stiffened Kirchhoff's plate bending using the Finite Element Method in MATLAB. We used the Hsieh-Clough-Tocher (HCT) element with 4 nodes and 10 degree of freedom for each triangular element. The applied force and Young’s Modulus were random, and we used the First-Order Reliability Method (FORM). The numerica