kost/SaxonSoc

Description

This repo experiment multiple things at once :

The BMB (Banana Memory Bus) which can cover both cached and cacheless SoC without compromises
A hardware description paradigm made of generators and depedancies which should be able to solve SoC toplevel hell
Linux and U-Boot on VexRiscv

A few kits are supported :

ulx3s (ECP5) , documented in bsp/Ulx3sLinuxUboot/README.md
Arty-A7 (Artix 7), documented in bsp/Arty7Linux/README.md
...

Repository structure

- hardware
  - scala      : SpinalHDL hardware description
  - netlist    : Folder used by SpinalHDL to generate the netlist
  - synthesis  : Contains synthesis scripts for various boards
- bsp          : Contains multiple Board Support Package used to build the software
- software
  - standalone : Contains multiple demo software to run in the CPU
- ext
  - SpinalHDL  : Hardware description language compiler
  - VexRiscv   : CPU hardware description

Dependencies

On Ubuntu 14 :

# JAVA JDK >= 8
sudo add-apt-repository -y ppa:openjdk-r/ppa
sudo apt-get update
sudo apt-get install openjdk-8-jdk -y
sudo update-alternatives --config java
sudo update-alternatives --config javac

# Install SBT - https://www.scala-sbt.org/
echo "deb https://dl.bintray.com/sbt/debian /" | sudo tee -a /etc/apt/sources.list.d/sbt.list
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 2EE0EA64E40A89B84B2DF73499E82A75642AC823
sudo apt-get update
sudo apt-get install sbt

# Verilator (for simulation only, v3.9+, in general apt-get will give you 3.8)
sudo apt-get install git make autoconf g++ flex bison
git clone http://git.veripool.org/git/verilator   # Only first time
unsetenv VERILATOR_ROOT  # For csh; ignore error if on bash
unset VERILATOR_ROOT  # For bash
cd verilator
git pull        # Make sure we're up-to-date
git checkout verilator_3_918
autoconf        # Create ./configure script
./configure
make
sudo make install

BMB spec (WIP)

Why BMB

The needs I had :

A memory bus which could be used from for cacheless + low latency to cachefull SoC design without overhead
Interconnect/Adapters which fit well in FPGA (without asyncronus ram reads)

Why not adopting a existing memory bus :

AXI4 and Tilelink memory ordering has overhead for cacheless CPU designs
AXI4 do not fit cacheless design as the AW W channels split add overhead to the interconnect
TileLink isn't FPGA friendly, as its rely on tracking each transaction (unique source identifier)
Nor AXI4, Tilelink, Wishbone, Avalon provide the features required for state-less adapters
With the SaxonSoc out of order elaboration, there was a quite some room for experimentation and automation

Key features

Feature which target the interconnect and adapters :

Context signals which allow a master to retrieve information from the bus responses, and consequently allow state-less adapters
State-less adapters allow unlimited number of pending transactions and avoid the usage of RAM/FIFO in adapters
Address and write data are part of the same link, which allow to have low latency interconnect (in comparison to AXI)
Allow out of oder completion via the 'source' signals

Feature to make slave implementation easier :

Address alignment parameter (BYTE, WORD, POW2) to allow simple slave implementations
Length width parameter, which combined with the alignement parameter, allow a slave to not support bursts (the interconnect will add the required adapters)

Other features :

WriteOnly, readOnly support

Parameters and signal

BMB can has the following parameters :

Name	Type	Description
addressWidth	Bitcount	Addresses are always in byte
dataWidth	Bitcount	Should be multiple of 8
lengthWidth	Bitcount	Number of byte of a burst = length
sourceWidth	Bitcount	Used for out of order completion
contextWidth	Bitcount	Used by masters/adapters to link informations to bursts
alignment	Enum	Smallest alignement used by the master (BYTE, WORD, POW2)
canRead	Boolean	Allow reads
canWrite	Boolean	Allow writes

BMB is composed of streams to carry transaction between a source and a sink. A stream is composed of :

Name	Direction	Description
valid	Source => Sink	transaction present on the interface
payload	Source => Sink	transaction content
ready	Source <= Sink	consume the transaction on the bus, don't care if there is no transaction

More details on https://spinalhdl.github.io/SpinalDoc-RTD/SpinalHDL/Libraries/stream.html

BMB is composed of two streams :

cmd : to carry requests, (read, write + data)
rsp : to carry responses (read + data, write)

The cmd stream is consquantly composed of the following signals

Name	Bitcount	Description
valid	1	Stream valid
ready	1	Stream ready
source	sourceWidth	Transaction source ID, allow out of order completion between different sources, similar to AXI ID
opcode	1	0 => READ, 1 => WRITE
address	addressWidth	Address of the first byte of the transaction, stay the same during a burst
length	lengthWidth	Burst bytes count
data	dataWidth	Data used for writes
mask	dataWidth/8	Data mask used for writes
context	contextWidth	Can be used by a master/adapter to link some informations to a burst (returned on rsp transactions)

During a write burst the source, opcode, address, length and context signal should remain stable.

And the rsp stream is :

Name	Bitcount	Description
valid	1	Stream valid
ready	1	Stream ready
source	sourceWidth	Identical to the corresponding cmd source
opcode	1	0 => SUCCESS, 1 => ERROR
data	dataWidth	Data used for reads
context	contextWidth	Identical to the corresponding cmd context

During a read burst the source and context signal should remain stable.

kost / SaxonSoc