compile error
matrix77 opened this issue · comments
It looks like some dev test code got committed. Let me fix that!
I released a fix. This should work now.
Thank u it's working.
On Nov 13, 2014 2:29 PM, "Kory" notifications@github.com wrote:
I released a fix. This should work now.
—
Reply to this email directly or view it on GitHub
#1 (comment)
.
Hi
1.I'd like to ask if any possibility to activate the scan option in marlin
firmware (to rotate the table)?
2.the 'move axes' in marlin firmware doesn't work?(the motors doesn't move
when activate in the menu).
Thanks.
On Nov 13, 2014 6:54 PM, "Bartha Csaba" qxsound@gmail.com wrote:
Thank u it's working.
On Nov 13, 2014 2:29 PM, "Kory" notifications@github.com wrote:I released a fix. This should work now.
—
Reply to this email directly or view it on GitHub
#1 (comment)
.
- Rotating is not supported in Marlin originally. I started to work on adding a new gcode (G101) which would add this support. I did not finish yet.
- Motor move should work, scan move not ready yet see 1.
hi
i'd like to help with scan option
this link .
https://github.com/cebbaker/cebscan/tree/Current
this is a code working with ramps 1.4
Thanks for that! That looks good. I will integrate it to marlin.
Hi
It's a problem with ramps box bottom & top I can't slice.(I want to print
with repetier 1.06 and when I run slicer not showing all parts of gcode)
Can u reload this 2 stl files?
Thk.
On Nov 21, 2014 1:00 PM, "Kory" notifications@github.com wrote:
Thanks for that! That looks good. I will integrate it to marlin.
—
Reply to this email directly or view it on GitHub
#1 (comment)
.
I have run the ramps box bottom through netfabb repair. This part should be fine now. However I could not find any problem with the ramps box top. I have updated the ramps box bottom on github.
i`m printing...
thank you.
Hi
I want to ask if you have some progress with scanning part of software.
Thk.
On Dec 8, 2014 3:14 PM, "Kory" notifications@github.com wrote:
I have run the ramps box bottom through netfabb repair. This part should
be fine now. However I could not find any problem with the ramps box top.—
Reply to this email directly or view it on GitHub
#1 (comment)
.
Hi,
I do not have a timeframe yet. But as I'm alone developer on this project it will take few months.
Because I think it is possible I have to modify the scanning software as well to able to send gcodes.
Cheers,
Hi can you help me with x-motorholder.stl object , I cant print ..when the
lm10uu holder is printing...the printer just printing in the air ...it is
no base to hold the hot material???
Thank you.
On Nov 13, 2014 2:29 PM, "Kory" notifications@github.com wrote:
I released a fix. This should work now.
—
Reply to this email directly or view it on GitHub
#1 (comment).
Hi,
x-motorholder.stl is designed to be printed on the side up. There is only one flat area (that is the bottom). And you need to turn on support which you would cut away after print.
Thank you for your help.
I try first the support material with y-idler.
Happy christmas.
On Dec 22, 2014 12:08 AM, "Kory" notifications@github.com wrote:
Hi,
x-motorholder.stl is designed to be printed on the side up. There is only
one flat area (that is the bottom). And you need to turn on support which
you would cut away after print.—
Reply to this email directly or view it on GitHub
#1 (comment)
.