kennetek / gridfinity-rebuilt-openscad

A ground-up rebuild of the stock gridfinity bins in OpenSCAD

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Magnet holes do not get generated

geekifier opened this issue · comments

Update: Comparing this with the baseplates from https://github.com/vector76/gridfinity_openscad, the magnets holes in this project simply don't get generated with any baseplate style. In the linked project, the magnet holes are generated ON TOP of the baseplate, without screw holes.

Toggling the magnet holes on/off makes the baseplate thicker, but still no magnet holes.
I tried both with the latest release of OpenSCAD, as well as with the DEV snapshot, same results.

I am attaching an STL exported with the following options:

OpenSCAD: 2023.02.15
$fa: 8
$fs: 0.25
gridx: 1
gridy: 1
length: 42

d screw: 3.35
d screw head 5
screw spacing: 0.5
n screws: 1

style plate: skeletonized
enable  magnet hole: true
style hole: counterbore

# second STL I generated with 
style hole: none

STL with enable magnet hole: true and style hole: counterbore:
skeletonized-counter-magnet-test.zip

STL with enable magnet hole: true and style hole: none:
skeletonized-nohole-magnet-test.zip

commented

Duplicate of #77