GPIO Micro Service - device service for connecting GPIO devices to EdgeX
- Function:
- This device service uses sysfs ABI (default) or chardev ABI (experiment) to control GPIO devices For a connected GPIO device, update the configuration files, and then start to read or write data from GPIO device
- This device service ONLY works on Linux system
- This device service is contributed by Jiangxing Intelligence
Currently, the NATS Messaging capability (NATS MessageBus) is opt-in at build time. This means that the published Docker image and Snaps do not include the NATS messaging capability.
The following make commands will build the local binary or local Docker image with NATS messaging capability included.
make build-nats
make docker-nats
The locally built Docker image can then be used in place of the published Docker image in your compose file.
See Compose Builder nat-bus
option to generate compose file for NATS and local dev images.
This component is packaged as docker image and snap.
For docker, please refer to the Dockerfile and Docker Compose Builder scripts.
For the snap, refer to the snap directory.
- This Device Service runs with other EdgeX Core Services, such as Core Metadata, Core Data, and Core Command
- The gpio device service can contains many pre-defined devices which were defined by device.custom.gpio.yaml such as
GPIO-Device01
. These devices are created by the GPIO device service in core metadata when the service first initializes - Device profiles (device.custom.gpio.yaml) are used to describe the actual GPIO hardware of a device and allow individual gpios to be given human-readable names/aliases
- After the gpio device service has started, we can read or write these corresponding pre-defined devices
name: "Custom-GPIO-Device"
manufacturer: "Jiangxing Intelligence"
model: "SP-01"
labels:
- "device-custom-gpio"
description: "Example of custom gpio device"
deviceResources:
-
name: "Power"
isHidden: false
description: "mocking power button"
attributes: { line: 17 }
properties:
valueType: "Bool"
readWrite: "RW"
-
name: "LED"
isHidden: false
description: "mocking LED"
attributes: { line: 27 }
properties:
valueType: "Bool"
readWrite: "W"
-
name: "Switch"
isHidden: false
description: "mocking switch"
attributes: { line: 22 }
properties:
valueType: "Bool"
readWrite: "R"
- Since GPIO sysfs interface is deprecated after Linux version 4.8, we provide two ABI interfaces: the sysfs version and the new chardev version. By default we set interface to sysfs, and you can change it inside
Driver
section ofconfiguration.yaml
. For the chardev interface, you still need to specify a selected chip, this is also underDriver
section.
Here we give two step by step guidance examples of using this device service. In these examples, we use RESTful API to interact with EdgeX (please notice that, you still need to use Core Command service rather than directly interact with GPIO device service).
Since the edgex-cli
has released, we can use this new approach to operate devices:
edgex-cli command list -d GPIO-Device01
If you would prefer the traditional RESTful way to operate, you can try:
curl http://localhost:59882/api/v3/device/name/GPIO-Device01
Use the curl
response to get the command URLs (with device and command ids) to issue commands to the GPIO device via the command service as shown below. You can also use a tool like Postman
instead of curl
to issue the same commands.
{
"apiVersion": "v2",
"statusCode": 200,
"deviceCoreCommand": {
"deviceName": "GPIO-Device01",
"profileName": "Custom-GPIO-Device",
"coreCommands": [
{
"name": "Power",
"get": true,
"set": true,
"path": "/api/v3/device/name/GPIO-Device01/Power",
"url": "http://edgex-core-command:59882",
"parameters": [
{
"resourceName": "Power",
"valueType": "Bool"
}
]
},
{
"name": "LED",
"set": true,
"path": "/api/v3/device/name/GPIO-Device01/LED",
"url": "http://edgex-core-command:59882",
"parameters": [
{
"resourceName": "LED",
"valueType": "Bool"
}
]
},
{
"name": "Switch",
"get": true,
"path": "/api/v3/device/name/GPIO-Device01/Switch",
"url": "http://edgex-core-command:59882",
"parameters": [
{
"resourceName": "Switch",
"valueType": "Bool"
}
]
}
]
}
}
When using sysfs, the operations to access and "read" or "write" the GPIO pins are to:
- Export the pin
- Set the direction (either IN or OUT)
- Read the pin input or write the pin value based on the direction
- Unexport the pin
When using sysfs, setting the direction causes the value to be reset. Therefore, this implementation only sets the direction on opening the line to the GPIO. After that, it is assumed the same direction is used while the pin is in use and exported.
The direction is set by an optional attribute in the device profile called defaultDirection
. It can be set to either "in" or "out". If it is not set, the default direction is assumed to be "out".
-
name: "LED"
isHidden: false
description: "mocking LED"
attributes: { line: 27, defaultDirection: "out" }
properties:
valueType: "Bool"
readWrite: "W"
Note: the direction should not be confused with the device profile's read/write property. If you set the defaultDirection to "in" but then set the readWrite property to "RW" or "W", any attempt to write to the pin will result in a "permission denied" error. For consistency sake, when your defaultDirection is "in" set readWrite to "R" only.
Assume we have a GPIO device (used for power enable) connected to gpio17 on current system of raspberry pi 4b. When we write a value to GPIO, this gpio will give a high voltage.
# Set the 'Power' gpio to high
$ curl -X PUT -d '{"Power":"true"}' http://localhost:59882/api/v3/device/name/GPIO-Device01/Power
{"apiVersion":"v2","statusCode":200}
$ cat /sys/class/gpio/gpio17/direction ; cat /sys/class/gpio/gpio17/value
out
1
# Set the 'Power' gpio to low
$ curl -X PUT -d '{"Power":"false"}' http://localhost:59882/api/v3/device/name/GPIO-Device01/Power
{"apiVersion":"v2","statusCode":200}
$ cat /sys/class/gpio/gpio17/direction ; cat /sys/class/gpio/gpio17/value
out
0
Now if you test gpio17 of raspberry pi 4b , it is outputting high voltage.
Assume we have another GPIO device (used for button detection) connected to pin 22 on current system. When we read a value from GPIO, this gpio will be exported and set direction to input.
$ curl http://localhost:59882/api/v3/device/name/GPIO-Device01/Switch
Here, we post some results:
{
"apiVersion": "v2",
"statusCode": 200,
"event": {
"apiVersion": "v2",
"id": "a6104256-92a4-41a8-952a-396cd3dabe25",
"deviceName": "GPIO-Device01",
"profileName": "Custom-GPIO-Device",
"sourceName": "Switch",
"origin": 1634221479227566300,
"readings": [
{
"id": "240dc2ea-d69f-4229-94c4-3ad0507cf657",
"origin": 1634221479227566300,
"deviceName": "GPIO-Device01",
"resourceName": "Switch",
"profileName": "Custom-GPIO-Device",
"valueType": "Bool",
"value": "false"
}
]
}
}
Add the device-gpio
to the docker-compose.yml of edgex foundry 2.0-Ireland.
...
device-gpio:
container_name: edgex-device-gpio
depends_on:
- consul
- data
- metadata
environment:
CLIENTS_CORE_COMMAND_HOST: edgex-core-command
CLIENTS_CORE_DATA_HOST: edgex-core-data
CLIENTS_CORE_METADATA_HOST: edgex-core-metadata
CLIENTS_SUPPORT_NOTIFICATIONS_HOST: edgex-support-notifications
CLIENTS_SUPPORT_SCHEDULER_HOST: edgex-support-scheduler
DATABASES_PRIMARY_HOST: edgex-redis
EDGEX_SECURITY_SECRET_STORE: "false"
MESSAGEQUEUE_HOST: edgex-redis
REGISTRY_HOST: edgex-core-consul
SERVICE_HOST: edgex-device-gpio
hostname: edgex-device-gpio
image: edgexfoundry/device-gpio:0.0.0-dev
networks:
edgex-network: {}
ports:
- 59910:59910/tcp
read_only: false
privileged: true
volumes:
- "/sys:/sys"
- "/dev:/dev"
security_opt:
- no-new-privileges:false
user: root:root
...
-
device-custom-gpio-profile.yaml
Core Command Method parameters Description Response Power put {"Power":} Set value for the specified gpio
: bool, "true" or "false"200 ok get Get value of the specified gpio
valueType: Bool"true"