jubenjum / learning-to-fly

Training transferable end-to-end quadrotor control policies on a laptop in 18 seconds.

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Learning to Fly in Seconds

animated
Trained for 18s on a 2020 MacBook Pro (M1) using RLtools.

animated
Trajectory tracking using a trained policy on a real Crazyflie (nano quadrotor).


Introduction

This repository contains the code for the paper Learning to Fly in Seconds. It allows to train end-to-end control policies using deep reinforcement learning. The training is done in simulation and is finished within seconds on a consumer-grade laptop. The trained policies generalize and can be deployed on real quadrotors:


The main dependency is the RLtools deep reinforcement learning library.

Instructions to run the code

Docker (isolated)

We provide a pre-built Docker image with a simple web interface that can be executed using a single command (given that Docker is already installed on your machine):

docker run -it --rm -p 8000:8000 arpllab/learning_to_fly

After the container is running, navigate to https://0.0.0.0:8000 and you should see something like (after starting the training):

Note that to make this Docker image compatible with a broad range of CPUs, some optimizations have been turned off. For full speed we recommend a Native installation.

Docker installation (isolated)

With the following instructions you can also easily build the Docker image yourself. If you want to run the code on bare metal jump Native installation.

First, install Docker on your machine. Then move to the original directory learning_to_fly and build the Docker image:

docker build -t arpllab/learning_to_fly .

If desired you can also build the container for building the firmware:

docker build -t arpllab/learning_to_fly_build_firmware -f Dockerfile_build_firmware .

After that you can run it using e.g.:

docker run -it --rm -p 8000:8000 arpllab/learning_to_fly

This will open the port 8000 for the UI of the training program and run it inside the container.

Navigate to https://0.0.0.0:8000 with your browser, and you should see something like in the screenshot above (after starting the training).

The training UI configuration does not log data by default. If you want to inspect the training data run:

docker run -it --rm -p 6006:6006 arpllab/learning_to_fly training_headless

Navigate to https://0.0.0.0:6006 with your browser to investigate the Tensorboard logs.

If you would like to benchmark the training speed you can use:

docker run -it --rm arpllab/learning_to_fly training_benchmark

This is the fastest configuration, without logging, UI, checkpointing etc.

Native installation

Clone this repository:

git clone https://github.com/arplaboratory/learning-to-fly learning_to_fly
cd learning_to_fly

Then instantiate the RLtools submodule:

git submodule update --init -- external/rl_tools
cd external/rl_tools

Then instantiate some dependencies of RLtools (for conveniences like checkpointing, Tensorboard logging, testing, etc.):

git submodule update --init -- external/cli11 external/highfive external/json/ external/tensorboard tests/lib/googletest/

Install dependencies on Ubuntu

sudo apt update && sudo apt install libhdf5-dev libopenblas-dev protobuf-compiler libprotobuf-dev libboost-all-dev

As an alternative to openblas you can also install Intel MKL which in our experience is significantly faster than OpenBLAS.

Install dependencies on macOS

brew install hdf5 protobuf boost

Please make sure that brew links the libraries correctly. If not you might have to link e.g. protobuf manually using brew link protobuf.

Going back to the main directory (learning_to_fly), we can now configure the build of the code:

cd ../../
mkdir build
cd build
  • Ubuntu + OpenBLAS: cmake .. -DCMAKE_BUILD_TYPE=Release -DRL_TOOLS_BACKEND_ENABLE_OPENBLAS:BOOL=ON
  • Ubuntu + MKL: cmake .. -DCMAKE_BUILD_TYPE=Release -DRL_TOOLS_BACKEND_ENABLE_MKL:BOOL=ON
  • macOS (tested on Sonoma): cmake .. -DCMAKE_BUILD_TYPE=Release

Finally, we can build the targets:

cmake --build . -j8

After successfully building the targets, we can run the code (in the original directory learning_to_fly):

cd ..
./build/src/training_headless 

While this is running, you should be able to see training metrics using Tensorboard

If not already installed:

python3 -m pip install tensorboard

Then from the original directory learning_to_fly:

tensorboard --logdir=logs

To run the training with the UI, we download the JavaScript dependencies in the form of the two files three.module.js and OrbitControls.js:

cd src/ui
./get_dependencies.sh

After that we can execute the UI binary from the root folder:

cd ../../
./build/src/ui 0.0.0.0 8000

Now you should be able to navigate to http://0.0.0.0:8000 in your browser and start the training.

To run the benchmark (with UI, checkpointing and Tensorboard logging turned off):

sudo nice -n -20 ./build/src/training_benchmark

Deploying trained policies on a Crazyflie

Train a policy, e.g. using the Docker image with the UI:

docker run -it --rm -p 8000:8000 -v $(pwd)/checkpoints:/learning_to_fly/checkpoints arpllab/learning_to_fly 

The checkpoints are placed in the current working directory's checkpoints folder. Inspect the logs of the container to find the path of the final log, e.g., checkpoints/multirotor_td3/2023_11_16_14_46_38_d+o+a+r+h+c+f+w+e+_002/actor_000000000300000.h. We can mount this file into the container arpllab/learning_to_fly_build_firmware for building the firmware, e.g.:

docker run -it --rm -v $(pwd)/checkpoints/multirotor_td3/2023_11_16_14_46_38_d+o+a+r+h+c+f+w+e+_002/actor_000000000300000.h:/controller/data/actor.h:ro -v $(pwd)/build_firmware:/output arpllab/learning_to_fly_build_firmware

This should build the firmware using the newly trained policy and output the binary to build_firmware/cf2.bin. After that we can use the cfclient package to flash the firmware (find the installation instructions here)

cfloader flash build_firmware/cf2.bin stm32-fw -w radio://0/80/2M

Note: Running the learned controller is at your own risk!

Using a Gamepad

Once the firmware is flashed, use the cfclient UI to connect to the Crazyflie. To fly you should have some system for position estimation. In our tests using the Crazyflie 2.1 and the Optical Flow Deck v2 10/10 seeds yielded policies that could successfully take-off and hover. We recommend using a game-controller to use the "hover button" as a Dead man's switch. The way our controller is configured by default, it reacts to the "hover button" as a signal to be activated. By default, it will shortly idle the motors and then pass through the RPM outputs of the policy. The default setpoint is 0.3m above the position of the quadrotor where the hover-button was pressed. Also make sure that the yaw angle is low before taking off because we noticed some agressive maneuvres when the yaw angle is too high which in combination with the ground effect might lead to a crash.

If you find a policy to take-off and hover well, you can change the parameter rlt.wn to 4 which puts the controller into figure-eight tracking mode. The scale and interval ([s]) can be adjusted by the parameters rlt.fes and rlt.fei respectively. The height at which the figure-eight is executed is set by rlt.target_z_fe.

Using the trigger script

If you don't have a gamepad available and for better trajectory tracking (taking off first -> then tracking) you can use the scripts/trigger.py script. It has three modes hover_original (just for testing), takeoff_and_switch, hover_learned, and trajectory_tracking. In all modes the enter key is used as the dead man's switch so that if anything goes wrong you can just release it and the motors should turn off.

Since taking-off has a big sim2real gap (ground-effect, z-ranger/optical-flow estimation behavior) and a large setpoint error, the most conservative option (and recommended first step) is to take-off with the original controller and then switch to the learned policy mid-air. This is accomplished by the takeoff_and_switch mode which takes off with the original controller and switches to the learned policy after three seconds. The height can be specified with --height.

python3 scripts/trigger.py --mode takeoff_and_switch

If the hovering is stable you can also try taking off using the policy. The hover_learned mode uses the trained policy to take-off and hover (the height can be specified with --height):

python3 scripts/trigger.py --mode hover_learned

trajectory_tracking takes off using the original controller first and after a timeout (3s by default) switches to the learned policy to do the trajectory tracking. The interval (5.5s by default) and the scale (1x by default, note the figure eight is 2mx1m by default) can be adjusted using the parameters --trajectory-scale and --trajectory-interval:

python3 scripts/trigger.py --mode trajectory_tracking --trajectory-scale 0.3

Note: If you moved the Crazyflie it is best to restart it before flying (in the same position and orientation as for the intended take-off) because the policy targets to regulate the global yaw to 0. If there is a large offset (e.g. >90 degree) this might trigger a strong response.

Citing

When using our code/setup in an academic work please cite our publication using the following Bibtex citation:

@misc{eschmann2023learning,
      title={Learning to Fly in Seconds}, 
      author={Jonas Eschmann and Dario Albani and Giuseppe Loianno},
      year={2023},
      eprint={2311.13081},
      archivePrefix={arXiv},
      primaryClass={cs.RO}
}

About

Training transferable end-to-end quadrotor control policies on a laptop in 18 seconds.

License:MIT License


Languages

Language:C++ 85.4%Language:JavaScript 5.5%Language:Cuda 2.6%Language:Python 1.7%Language:CMake 1.6%Language:CSS 1.5%Language:C 0.9%Language:Dockerfile 0.5%Language:HTML 0.3%Language:Shell 0.1%