Missing dimension on the Wing Fold assembly drawing
mmanlove1 opened this issue · comments
Please fill out the issue as completely as possible. Be very specific and take your time. The more effort you put in to fill the issue out completely, the quicker we can fix this or look at adding your requested feature.
Summary:
On page 6 of the OH5A2A2-1 - ASSY, WING FOLD HANDLE - v7 drawing, the dimension to locate the groove for the ball-nose spring plunger detent from the end of the shaft is missing.
Expected Results/How It Should Work:
Add the dimension from the end of the shaft to the location of the detent groove.
Actual Results/How It Does Work:
(Explain how it actually works here. Be very specific.)
Screenshots:
More Information
Add an "X" in the square brackets to check the applicable checkboxs.
Category:
Check one or more items.
- MCAD (SolidWorks)
- ECAD (PCB Design or other electrical hardware)
- Software - Sketch
- Software - DCS-BIOS
- Software - Library
Type:
Check one item.
- Bug
- Feature Enhancement
- Maintenance
- Question
- [ X] Documentation
Applicable End Item:
Check one item.
- Top Level Assembly
- Lower Instrument Panel (LIP)
- Main Instrument Panel (MIP)
- [ X] Left Console
- Right Console
- Seat
- Center Tub
- Flight Stick
- Throttle
- General Software
Associated Filename(s):
OH5A2A2-1 - ASSY, WING FOLD HANDLE_-_v7.pdf
Drawing error - there is no notch machined in. Its the hidden lines showing the profile of the hole.
Redrew for clarity.
Closed with 6b44c8d