ath10k-firmware-qca988x and ath10k-firmware-qca99x0 issue
jack338c opened this issue · comments
Hello
I try to build my netgear r7500 v2 with your repo (ath10k-firmware-qca988x and ath10k-firmware-qca99x0)
but got following errors
Would you please hlep me to solve this issue
thank you
`Receiving objects: 100% (2145/2145), 67.01 MiB | 1.41 MiB/s, done.
Resolving deltas: 100% (1073/1073), done.
Note: switching to '076160b4357ff39db59bac13993011caee820934'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 076160b QCA9984 hw1.0: 3.9.0.2: add firmware-5.bin_10.4-3.9.0.2-00148
Packing checkout...
touch /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.prepared_7cb233038f973c8c7860fa3e7bf76e1e_6664517399ebbbc92a37c5bb081b5c53_check
. /home/x250/jolla999/include/shell.sh; xzcat /home/x250/jolla999/dl/ath10k-firmware-2021-05-21-076160b4.tar.xz | tar -C /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.. -xf -
[ ! -d ./src/ ] || cp -fpR ./src/. /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4
touch /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.prepared_7cb233038f973c8c7860fa3e7bf76e1e_6664517399ebbbc92a37c5bb081b5c53
rm -f /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.configured_*
rm -f /home/x250/jolla999/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/stamp/.ath10k-firmware_installed
(cd /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/./; if [ -x ./configure ]; then find /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ -name config.guess | xargs -r chmod u+w; find /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ -name config.guess | xargs -r -n1 cp --remove-destination /home/x250/jolla999/scripts/config.guess; find /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ -name config.sub | xargs -r chmod u+w; find /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ -name config.sub | xargs -r -n1 cp --remove-destination /home/x250/jolla999/scripts/config.sub; AR="arm-openwrt-linux-muslgnueabi-gcc-ar" AS="ccache_cc -c -Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4=ath10k-firmware-2021-05-21-076160b4 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro" LD=arm-openwrt-linux-muslgnueabi-ld NM="arm-openwrt-linux-muslgnueabi-gcc-nm" CC="ccache_cc" GCC="ccache_cc" CXX="ccache_cxx" RANLIB="arm-openwrt-linux-muslgnueabi-gcc-ranlib" STRIP=arm-openwrt-linux-muslgnueabi-strip OBJCOPY=arm-openwrt-linux-muslgnueabi-objcopy OBJDUMP=arm-openwrt-linux-muslgnueabi-objdump SIZE=arm-openwrt-linux-muslgnueabi-size CFLAGS="-Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4=ath10k-firmware-2021-05-21-076160b4 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro " CXXFLAGS="-Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4=ath10k-firmware-2021-05-21-076160b4 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro " CPPFLAGS="-I/home/x250/jolla999/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/usr/include -I/home/x250/jolla999/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/include/fortify -I/home/x250/jolla999/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/include " LDFLAGS="-L/home/x250/jolla999/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/usr/lib -L/home/x250/jolla999/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/lib -znow -zrelro " ./configure --target=arm-openwrt-linux --host=arm-openwrt-linux --build=x86_64-pc-linux-gnu --program-prefix="" --program-suffix="" --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/lib --sysconfdir=/etc --datadir=/usr/share --localstatedir=/var --mandir=/usr/man --infodir=/usr/info --disable-nls ; fi; )
touch /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.configured_68b329da9893e34099c7d8ad5cb9c940
rm -f /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.built
touch /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.built_check
touch /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.built
mkdir -p /home/x250/jolla999/bin/targets/ipq806x/generic/packages /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca988x/CONTROL /home/x250/jolla999/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/pkginfo
install -d -m0755 /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca988x/lib/firmware/ath10k/QCA988X/hw2.0
install -m0644 /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/QCA988X/hw2.0/board.bin /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca988x/lib/firmware/ath10k/QCA988X/hw2.0/
install -m0644 /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/QCA988X/hw2.0/10.2.4-1.0/firmware-5.bin_10.2.4-1.0-00047 /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca988x/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin
find /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca988x -name 'CVS' -o -name '.svn' -o -name '.#' -o -name '~'| xargs -r rm -rf
export CROSS="arm-openwrt-linux-muslgnueabi-" NO_RENAME=1 ; NM="arm-openwrt-linux-muslgnueabi-nm" STRIP="/home/x250/jolla999/staging_dir/host/bin/sstrip -z" STRIP_KMOD="/home/x250/jolla999/scripts/strip-kmod.sh" PATCHELF="/home/x250/jolla999/staging_dir/host/bin/patchelf" /home/x250/jolla999/scripts/rstrip.sh /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca988x
(cd /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca988x/CONTROL; ( echo "$CONTROL"; printf "Description: "; echo "$DESCRIPTION" | sed -e 's,^[[:space:]]*, ,g'; ) > control; chmod 644 control; ( echo "#!/bin/sh"; echo "[ "${IPKG_NO_SCRIPT}" = "1" ] && exit 0"; echo "[ -s "${IPKG_INSTROOT}/lib/functions.sh" ] || exit 0"; echo ". ${IPKG_INSTROOT}/lib/functions.sh"; echo "default_postinst
install -d -m0755 /home/x250/jolla999/bin/packages/arm_cortex-a15_neon-vfpv4/base
/home/x250/jolla999/staging_dir/host/bin/fakeroot /home/x250/jolla999/scripts/ipkg-build -m "" /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca988x /home/x250/jolla999/bin/packages/arm_cortex-a15_neon-vfpv4/base
Packaged contents of /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca988x into /home/x250/jolla999/bin/packages/arm_cortex-a15_neon-vfpv4/base/ath10k-firmware-qca988x_2021-05-21-076160b4-1_arm_cortex-a15_neon-vfpv4.ipk
rm -rf /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.pkgdir/ath10k-firmware-qca988x.installed /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.pkgdir/ath10k-firmware-qca988x
mkdir -p /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.pkgdir/ath10k-firmware-qca988x
install -d -m0755 /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.pkgdir/ath10k-firmware-qca988x/lib/firmware/ath10k/QCA988X/hw2.0
install -m0644 /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/QCA988X/hw2.0/board.bin /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.pkgdir/ath10k-firmware-qca988x/lib/firmware/ath10k/QCA988X/hw2.0/
install -m0644 /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/QCA988X/hw2.0/10.2.4-1.0/firmware-5.bin_10.2.4-1.0-00047 /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.pkgdir/ath10k-firmware-qca988x/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin
touch /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/.pkgdir/ath10k-firmware-qca988x.installed
mkdir -p /home/x250/jolla999/bin/targets/ipq806x/generic/packages /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca99x0/CONTROL /home/x250/jolla999/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/pkginfo
install -d -m0755 /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca99x0/lib/firmware/ath10k/QCA99X0/hw2.0
install -m0644 /home/x250/jolla999/dl/ /home/x250/jolla999/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-21-076160b4/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca99x0/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
install: omitting directory '/home/x250/jolla999/dl/'
make[2]: *** [Makefile:186: /home/x250/jolla999/bin/packages/arm_cortex-a15_neon-vfpv4/base/ath10k-firmware-qca99x0_2021-05-21-076160b4-1_arm_cortex-a15_neon-vfpv4.ipk] Error 1
make[2]: Leaving directory '/home/x250/jolla999/package/firmware/ath10k-firmware'
time: package/firmware/ath10k-firmware/compile#66.91#5.06#111.78
ERROR: package/firmware/ath10k-firmware failed to build.
make[1]: *** [package/Makefile:116: package/firmware/ath10k-firmware/compile] Error 1
make[1]: Leaving directory '/home/x250/jolla999'
make: *** [/home/x250/jolla999/include/toplevel.mk:230: package/firmware/ath10k-firmware/compile] Error 2
`
@jack338c Need to show full log.
But in my case, you should turn off all of CONFIG_PACKAGE_ath10k-board-XXXXXX in your .config file.
Try to build with turn off these options and please give me feedback again. Thanks.
@jollaman999
Ok,I will try
many thanks !
I just use your newest fresh openwrt to build my ea7500 v1 ,but still got issues on ath10k (turn off all of CONFIG_PACKAGE_ath10k-board-XXXXXX or turn on ,no works)
Could you tell me any idea?
thank you
`ath10k-firmware-2021-05-28-718044dd.tar.xz: Download from https://github.com/kvalo/ath10k-firmware.git failed
ath10k-firmware-2021-05-28-718044dd.tar.xz: Requires sha256sum for verification
Checking out files from the git repository...
Cloning into 'ath10k-firmware-2021-05-28-718044dd'...
remote: Enumerating objects: 2187, done.
remote: Counting objects: 100% (358/358), done.
remote: Compressing objects: 100% (188/188), done.
remote: Total 2187 (delta 211), reused 272 (delta 131), pack-reused 1829
Receiving objects: 100% (2187/2187), 68.53 MiB | 6.96 MiB/s, done.
Resolving deltas: 100% (1100/1100), done.
Note: switching to '718044ddcc1ad84466b69cebe144023e2dd342a0'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 718044d QCA9984 hw1.0: 3.9.0.2: add firmware-5.bin_10.4-3.9.0.2-00149
Packing checkout...
touch /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/.prepared_d058602186a4c7c1b4dc0c76363370d9_6664517399ebbbc92a37c5bb081b5c53_check
. /home/x250/jollaman3/include/shell.sh; xzcat /home/x250/jollaman3/dl/ath10k-firmware-2021-05-28-718044dd.tar.xz | tar -C /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/.. -xf -
[ ! -d ./src/ ] || cp -fpR ./src/. /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd
touch /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/.prepared_d058602186a4c7c1b4dc0c76363370d9_6664517399ebbbc92a37c5bb081b5c53
rm -f /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/.configured_*
rm -f /home/x250/jollaman3/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/stamp/.ath10k-firmware_installed
(cd /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/./; if [ -x ./configure ]; then find /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/ -name config.guess | xargs -r chmod u+w; find /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/ -name config.guess | xargs -r -n1 cp --remove-destination /home/x250/jollaman3/scripts/config.guess; find /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/ -name config.sub | xargs -r chmod u+w; find /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/ -name config.sub | xargs -r -n1 cp --remove-destination /home/x250/jollaman3/scripts/config.sub; AR="arm-openwrt-linux-muslgnueabi-gcc-ar" AS="ccache_cc -c -Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd=ath10k-firmware-2021-05-28-718044dd -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro" LD=arm-openwrt-linux-muslgnueabi-ld NM="arm-openwrt-linux-muslgnueabi-gcc-nm" CC="ccache_cc" GCC="ccache_cc" CXX="ccache_cxx" RANLIB="arm-openwrt-linux-muslgnueabi-gcc-ranlib" STRIP=arm-openwrt-linux-muslgnueabi-strip OBJCOPY=arm-openwrt-linux-muslgnueabi-objcopy OBJDUMP=arm-openwrt-linux-muslgnueabi-objdump SIZE=arm-openwrt-linux-muslgnueabi-size CFLAGS="-Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd=ath10k-firmware-2021-05-28-718044dd -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro " CXXFLAGS="-Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd=ath10k-firmware-2021-05-28-718044dd -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro " CPPFLAGS="-I/home/x250/jollaman3/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/usr/include -I/home/x250/jollaman3/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/include/fortify -I/home/x250/jollaman3/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/include " LDFLAGS="-L/home/x250/jollaman3/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/usr/lib -L/home/x250/jollaman3/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/lib -znow -zrelro " ./configure --target=arm-openwrt-linux --host=arm-openwrt-linux --build=x86_64-pc-linux-gnu --program-prefix="" --program-suffix="" --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/lib --sysconfdir=/etc --datadir=/usr/share --localstatedir=/var --mandir=/usr/man --infodir=/usr/info --disable-nls ; fi; )
touch /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/.configured_68b329da9893e34099c7d8ad5cb9c940
rm -f /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/.built
touch /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/.built_check
touch /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/.built
mkdir -p /home/x250/jollaman3/bin/targets/ipq806x/generic/packages /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca99x0/CONTROL /home/x250/jollaman3/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/pkginfo
install -d -m0755 /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca99x0/lib/firmware/ath10k/QCA99X0/hw2.0
install -m0644 /home/x250/jollaman3/dl/ /home/x250/jollaman3/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/ath10k-firmware-2021-05-28-718044dd/ipkg-arm_cortex-a15_neon-vfpv4/ath10k-firmware-qca99x0/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
install: omitting directory '/home/x250/jollaman3/dl/'
make[2]: *** [Makefile:186: /home/x250/jollaman3/bin/packages/arm_cortex-a15_neon-vfpv4/base/ath10k-firmware-qca99x0_2021-05-28-718044dd-1_arm_cortex-a15_neon-vfpv4.ipk] Error 1
make[2]: Leaving directory '/home/x250/jollaman3/package/firmware/ath10k-firmware'
time: package/firmware/ath10k-firmware/compile#65.15#3.13#75.01
ERROR: package/firmware/ath10k-firmware failed to build.
make[1]: *** [package/Makefile:116: package/firmware/ath10k-firmware/compile] Error 1
make[1]: Leaving directory '/home/x250/jollaman3'
make: *** [/home/x250/jollaman3/include/toplevel.mk:230: package/firmware/ath10k-firmware/compile] Error 2
`
@jack338c Sorry for my mistake and late reply. I missed board file for 99x0. Could you try it again?
@jollaman999
I will
many thanks !
It works !
Thanks again
@jack338c Perfect! Thanks for using my source. :)
@jollaman999
the Hardware NAT (qca-ssdk) is really good !
Today I found the ath10k-firmware-qca99x0 may have issue on setting up 802.11s (mesh),it's always show "wireless is not associated" after added mesh ap,neither on 2.4g or 5G (but offical openwrt firmware is ok)
and my ex6150 v2 (ath10k-firmware-qca99x0 ) works on setting up 802.11s with your repo
Dose your ZyXEL_NBG6817 have this issue too?
thanks
by the way
I just found Kernel Log in my ea7500 v1 like this:
@jack338c I didn't tested 802.11s feature. I will check if there are some issue with my router.
@David3434 Hi, thank you for using my source.
I will check if there are any differences in target sources with openwrt.
Also, could you provide your .config file in your source's root folder?
Here is the .config.thanks
@jollaman999
I just build a new fresh from openwrt official ,it's same issue
jack338c are my another account
I'm sorry for troubles
I tested it ,change to ath10k-firmware-qca99x0-ct,mesh will work
@jack338c Hmmm.. So, maybe only ct firmware can handle 802.11s?
It should be have diffrent features but there are no detail informations about stock firmware.
@jack338c I didn't check cpu clock issue yet. Sorry.
I'm interesting with wireguard new VPN protocol now. And it shows amazing speed.
@jollaman999
sounds good,I have interest to test it later
I found this ACwifidude/openwrt@4fc9ca2 did you test this before?
@jack338c It looks good. I will cherry-pick and test it.
@jack338c I didn't check cpu clock issue yet. Sorry.
I'm interesting with wireguard new VPN protocol now. And it shows amazing speed.
I find the reason for the cpu issue,it was locked,because too hot
@jack338c I see. It looks like simillar with thermal throttlig in smart phones.