To set up your navel robot, follow these steps:
- Ensure that your computer receives an IP address from the router and verify that it has been successfully assigned.
- On your browser, navigate to 192.168.0.1 to open the router's configuration page.
- Log in with the username 'admin' and the password found on the bottom of the router.
- Ensure the power cable is connected to the robot.
- Press the button located on the robot's back-bottom side.
- The robot should display a blinking green light on the button, indicating it's trying to boot up.
- The robot will try to connect the router using wifi connection.
- Check which IP addresses are assigned to the robot. If the robot hasn't received an IP address, connect it to the router using a LAN cable.
- Open a web browser and enter the robot's IP address.
- This will take you to the web-based control page for the navel robot, where you can manage its settings and functions.
- To login, use 'navel' for username, ??? for password. (Please reach out to your supervisor to obtain the password)