jcgruenhage / repology-rules

Package normalization ruleset for Repology

Home Page:https://repology.org

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Repology ruleset

Build Status

There can be a huge discrepancy in how packages for single project are named and versioned in different repositories, so Repology needs a flexible ruleset in order to overcome the differences, match packages and make versions comparable.


You are welcome to submit pull requests with rules you need. Here's a quick pointer of how to add specific rules:

You want to merge differently named packages into a single entry?

  • Choose target name (prefer least ambiguous and/or most widely used name)
  • Open correspoinding yaml file under 800.renames-and-merges/
  • Add rule like - { setname: <new name>, name: <old name> }

You want to mark incorrect version of specific package?

  • Open correspoinding yaml file under 900.version-fixes/
  • Add rule like: - { name: <package name>, ver: <bad version>, ignore: true }
  • Consider using a verpat with regular expression to match similar bad versions which may appear in the future. Examples:
    • verpat: "20[0-9]{6}" to match dates (20110323)
    • verpat: "20[0-9]{2}\\.[0-9]{2}\\.[0-9]{2}" same, but for delimited date, (2010.03.23)
    • verpat: ".*20[0-9]{6}.*" to match dates anywhere in the version (1.0.20110323)
    • verpat: "[0-9a-f]{7}" match something resembling a git commit (a7b823f)
    • verpat: "[0-9]{4,}" match something resembling a build or revision number (12345)

You want to split different projects with the same name

  • Open correspoinding yaml file under 850.split-ambiguities/
  • Add a set of rules which distinct packages, such as:
    • - { name: <ambiguous name>, wwwpart: <part of the homepage url>, setname: <specific name> }
    • - { name: <ambiguous name>, category: <category>, setname: <specific name> }
    • - { name: <ambiguous name>, verpat: <version pattern>, setname: <specific name> }
    • - { name: <ambiguous name>, ruleset: <families>, setname: <specific name> } as a least resort


Things to know if you're submitting pull request or have push access to this repository.

  • Repology is currently set up to automatically pull latest ruleset from master branch in this repo on each update, so everything committed here will be automatically applied to repology in several hours.
  • Repology runs make check after updating the repo, and if it fails, rolls back to the latest good commit, so it's somewhat protected from broken ruleset.
  • In the worst case, broken ruleset will prevent repology from updating until the problem is resolved.
  • Still, please run make check before committing, and/or install a git hook (scripts/pre-push) which runs it for you (you can copy it into .git/hooks or just run make install-hook).
  • The checker script requires python modules voluptous and PyYAML. pip install PyYAML voluptuous should install them for you.
  • In general, stay close to the style already used in the ruleset, use existing rules as examples, keep it simple and have fun!
  • If in doubt, you can always just submit a report on the website and avoid all the work!

Rule basics

Rules are stored in a set of files in YAML format, a flexible human friendly markup format for structured data. Each rule is a single item of big array, and may be written in single or multiple lines (depending on what's more convenient for the particular case), for example this rule renames etracer into extreme-tuxracer.

- { name: etracer, setname: extreme-tuxracer }

which is the same as:

- name: etracer
  setname: extreme-tuxracer

Each rule has a set of keywords which specify how a package is matched (by name, version, repository, category etc.) and how it is modified (package is renamed, version scheme is changed, flags are applied etc.).

Rule order matters, as multiple rules may match a single package, and they are applied in order. Further more, changes applied by earlier rules are affecting further matches: for instance, if a package is renamed, new name will be matched for the following rules.

While rules are basically arbitrary, it's practical though to attribute each rule to specific class of action, most distinctive of which are:

  • Rename or merge rules. Match name, and set another name. Main purpose is to merge differently named packages into the same project. Such as etracer, extremetuxracer, extreme-tuxracerextreme-tuxracer.
  • Split rules. Match name and some additional property (version, homepage or repository) and set another name. Used to split similarly named packages of different projects. Such as clementineclementine-wm, clementine-player.
  • Version fixes. Match name but do not change it, instead change versions or set some version-related flags. Used to fix incorrect versioning scheme (v1.01.0), mark some versions as devel (such as beta versions), or ignore some versions (e.g. snapshots like 20130523 while there's official version like 1.0).

Ruleset structure

Ruleset is split into several distinctive parts, mostly based on functional class of rules described above. They are arranged in such a way that when adding a rule into a specific part you don't need to be aware of the rest of the ruleset.

  • 100.prefix-suffix - normalization of repository specific prefixes and suffixes which are not part of the meaningful package name. Such as removal of lib32- prefixes.

  • 2xx.handpicked - a block where access to unmodified package names is needed, such as manual whitelists or blacklists.

  • [45]xx.wildcard - wildcard rules which affect a lot of packages. These mostly handle modules for specific languages such as Perl (which may be named like p5-Foo-Bar or libfoo-bar-perl in different repos) by adding distinctive prefix (perl: in this case) to them, so they do not conflict with modules for other languages and other software.

    There are three subsets here:

    • pure rules which are known to not have any false positives (e.g. packages from CPAN are always perl modules).
    • exceptions for the wildcard rules
    • wildcard rules themselves
  • 750.exceptions - the small set of remaining exceptions. If a package needs rule here, it's most positively incorrectly named.

  • 800.renames-and-merges - pure merge rules

  • 850.split-ambiguities - pure split rules

  • 900.version-fixes - pure version fixes

  • 950.split-branches - additional split section for project which have multiple development branches which are incompatible and may present in a single repository at the same time for compatibility purposes. Such as gtk2 and gtk3.

  • There are also some fixme subsets which are remainings of previous generation of the ruleset. These files will eventually be refactored and removed.

This may seem complex, but in practice the mostly used rulesets are 800, 850 and 900, which cleanly correspond to three functional classes of rules described in the previous section.

Other parts of the ruleset may need attention when new repositories are introduced.

Rule syntax

As already mentioned, keywords which rules consist are related to either matching packages or modifying them. Here's detailed description for all of them.



Each repository Repology supports has a set of rulesets associated with it. For instance, all Debian-based distros have ruleset debuntu. It may be used to only match packages in specific repositories, but without need to chase specific repository version. You may look up repositories and their retails in repos.d directory of main Repology repository.

You may specify a list of rulesets to match either of them.

- { ruleset: freebsd, ... }

- { ruleset: [ arch, openbsd ], ... }


Disable rule matching for specified ruleset(s).

# applies to all Debian derivatives, but not Deepin
- { ruleset: debuntu, noruleset: deepin, ... }


Deprecated. Same as ruleset and may be just changed into it.


Matches package category(ies). Note that category information is not available for all repositories and each repository may have its own set of categories.

- { category: games, ... }

- { category: [ mail-client, mail-filter, mail-mta ], ... }


Matches package maintainer(s). Match is case insensitive.

- { maintainer: "nobody@nowhere.com" }


Match exact package name(s).

- { name: firefox, ... }

- { name: [postgresql-client, postgresql-server, postgresql-contrib], ... }


Matches package name against a regular expression. Whole name is matched. May contain captures.

- { name: "swig[0-9]+", ... }


Matches exact package version(s).

- { name: firefox, ver: "50.0.1", ... }


Matches package version name against a regular expression. Whole version is matched. Note that you need to escape periods which mean "any symbol" in regular expressions. Matching is case insensitive.

- { name: firefox, verpat: "50\\.[0-9]+", ... }

- { name: firefox, verpat: "50\\..*", ... }


Matches versions longer than a given number of dot-separated parts.

Mostly useful to match broken version schemes with extra versions components added.

- { name: gimp, verlonger: 3, ...} # is something unofficial

vergt, verge, verlt, verle, vereq, verne

Compares version to a given one and matches if it's:

  • vergt: greater (>)
  • verge: greater or equal (≥)
  • verlt: lesser (<)
  • verle: lesser or equal (≤)
  • vereq: equal
  • verne: not equal
# match git >= 2.16
- { name: git, verge: "2.16", ...}

Be careful when using this with regard to pre-release versions: 1.0beta1 is lesser than 1.0, so it won't match verge: 1.0. You may use verpat instead.


Matches package homepage against a regular expression. Note that unlike namepat and verpat, partial match is allowed here. Also note that it's preferred to escape dots with double slash, as . means "any character" in regular expressions.

- { name: firefox, wwwpat: "mozilla\\.org", ... }


Matches when a package homepage contains given substring. This is usually more practical than wwwpat as in most cases you just need to match an URL part and don't need complex patterns, also you don't want to bother with escaping here. Matching is case insensitive.

- { name: firefox, wwwpart: "mozilla.org", ... }


Matches when a package summary contains given substring. Useful as as an alternative to wwwpart for cases where package homepage is not available. Matching is case insensitive.

- { name: firefox, summpart: "browser", ... }


Matches when a package has p_is_patch flag set (see p_is_patch action below).



Effectively rename the package. You may use $0 placeholder to substitute original name or $1, $2 etc. to subsided contents of corresponding captures of regular expression used in namepat. Note that you don't need to use neither name nor namepat for $0 to work, but you must have namepat with corresponding captures to use $1 and so on.

# etracer→extreme-tuxracer
- { name: etracer, setname: extreme-tuxracer }

# aspell-dict-en→aspell-ru, aspell-dict-ru→aspell-ru etc.
- { namepat: "aspell-dict-(.*)", setname: "aspell-$1" }

# all packages in dev-perl Gentoo category are prepended `perl:`
# Locale-Msgfmt→perl:Locale-Msgfmt
- { ruleset: gentoo, category: dev-perl, setname: "perl:$0" }


Changes the version of the package. As with setname, you may use $0, $1 placeholders.

# remove bogus leading version component
- { verpat: "0\\.(.*)", setver: $1 }


Set to true to completely remove package. It will not appear anywhere in repology. Set to false to undo.

# a metapackage which does not refer to any real project, we don't need it
- { name: "x11-fonts", remove: true }


Set to true to mark version of matched package as development or unstable version, so it does not make latest stable version outdated. Set to false to undo.

# mark versions with odd second component as devel
- { name: gnome-terminal, verpat: "[0-9]+\\.[0-9]*[13579]\\..*", devel: true }

ignore, incorrect, untrusted, noscheme, snapshot, successor, debianism, rolling

Set to true to ignore specific package versions. This is meant for the cases where comparison is not possible - ignore version are excluded from comparison and do not affect status of other versions. There are multiple ignore flavors:

  • rolling - package is fetched from always latest snapshot or VCS master/trunk. Its version has no meaning (like Gentoo's 9999), it may contain repository specific format of commit hash, revision or date.
  • noscheme - there's no official versioning scheme. Repositories may use random versions or dates, there's no point comparing them.
  • incorrect - known incorrect version (e.g. version which was not released yet)
  • untrusted - used for repositories which are known for providing incorrect versions, to ignore them proactively. It's common pattern to create a pair of incorrect rule matching specific version and untrusted rule for the following versions in a given repository.
  • ignored - general ignore
  • successor - currently alias for devel used to convey additional meaning: this is a fork of unmaintained original project
  • debianism - currently alias for devel used to convey additional meaning: this package uses distribution maintained at debian (probably with version addendum)
  • snapshot - currently alias for ignored
# Fedora was known to use "6.0.0" version before it was actually released
# mark as incorrect and prevent future problems
- { name: llvm, ver: "6.0.0", ruleset: fedora, incorrect: true }
- { name: llvm, ruleset: fedora, untrusted: true }


Set to true to indicate that this project uses p letter in version to indicate post- or patch releases. This fixes version comparison, as by default p is treated as pre-release.

# sudo 1.8.21p2 > 1.8.21
- { name: sudo, p_is_patch: true }


Set to true to indicate that this project uses any letter in version to indicate post- releases.

# rb here denotes a patchset, treat is as such
- { name: webalizer, verpat: ".*rb.*", any_is_patch: true }


Set to true to force the package to be outdated, even if its version is compared as greatest. false to undo.

# when 0.20 follows 0.193:
- { version: "0.193", outdated: true }


Set to true to force the package to be legacy instead of outdated. false to undo. Useful when a specific repository purposely contains an outdated version of specific project for compatibility purposes.

- { name: ruby-slack-notifier-1, ruleset: aur, legacy: true }


Output a given warning when matched. Useful to catch places which

# will catch unexpected versions
- { name: gtk, verpat: "1\\..*", setname: gtk1 }
- { name: gtk, verpat: "2\\..*", setname: gtk2 }
- { name: gtk, verpat: "3\\..*", setname: gtk3 }
- { name: gtk, verpat: "4\\..*", setname: gtk4 }
- { name: gtk, warning: "Neither of gtk1,2,3,4 - need a new rule or some weirdness is going on" }

# will trigger a warning if new project called "tesseract" appears
# ...or website changes, or just a package without website defined appears,
# so it'll require another condition
- { name: tesseract, setname: tesseract-game, wwwpart: tesseract.gg }
- { name: tesseract, setname: tesseract-ocr, wwwpart: tesseract-ocr }
- { name: tesseract, warning: "Please add rule for tesseract" }


Flavors are used to distinct set of packages denoting a multiple version of a project and a set of packages denoting a multiple parts or variants of a project. Consider an example:

  • foo1 1.0 and foo2 2.0 merged into foo. In this case they denote a multiple versions of the same project, flavors are not needed here and foo1 will have legacy status.
  • foo-client 1.0 and foo-server 1.1 merged into foo. In this case they denote a parts of the same project, which are expected to be of the same version. Flavors should be used in this case, so foo-client will have outdated status.

Flavors a plain strings and may be arbitrary, for example client and server in the last example. You may specify flavor explicitly or use true value to make flavor taken from the package name.

- { name: postgresql-client, setname: postgresql, addflavor: client }
- { name: postgresql-server, setname: postgresql, addflavor: server }

# This works too
- { name: [postgresql-client, postgresql-server], setname: postgresql, addflavor: true }


Set to true to remove all previously added flavors.


Set to true to stop ruleset processing right after the current rule.

Consider this a legacy, it should not be needed


Takes pattern and replacement strings and applies them to the package name. Used for low-level normalization.

# slashes in package names are not allowed
- { replaceinname: { "/": "-" } }

# also useful for some repositories
- { replaceinname: { " ": "-" } }


Converts a package name to lowercase. This is called once in the very beginning of the ruleset. The purpose of having this as a rule action is to be able to have exceptions, e.g. packages which should be distinguished solely by the case of their names.

- { tolowername: true }

Conditional rules

For additional flexibility, a mechanism exists to toggle some rules based on the previous rules.


Sets a virtual flag (arbitrary string) which only exists for the duration of rule processing and may be checked in the following rules.

- { name: python, addflag: not_python_module }

flag, noflag

Only matches if the specified flag is (or is not) set.

- { name: python, addflag: not_python_module }
# will add "python:" prefix to all packages in category "python",
# but not for "python" package
- { category: python, noflag: not_python_module, setname: "python:$0" }


These annotations do not affect package processing, but are related to ruleset maintenance.


Indicates that a rule needs manual maintenance. For example, when development version cannot be determined from the version schema, one would need to revisit and update the version occasionally.

- { name: tor, verge: "0.3.4", devel: true, maintenance: true }


Indicates that a rule should not be removed even if it doesn't match any packages. That is, a rule is likely to be useful sometime in the future.


Indicates that a rule may be removed if it doesn't match any packages.



GPLv3 or later, see COPYING.


Package normalization ruleset for Repology


License:GNU General Public License v3.0


Language:Python 97.7%Language:Shell 1.2%Language:Makefile 1.1%