ControlR Status stopped - can't access WebUI
ThaDaVos opened this issue · comments
Dylan Vos commented
My ControlR plugin says the status is stopped also the app tells me to install the plugin, I'm running UnRaid 6.7.2 (Nvidia patched) - are there any logs I can check? Any idea what it doesn't work?
Juan B. Rodriguez commented
Hi, try this ...
ps aux | grep controlr
this will output the command line for controlr
If that comes up empty, try
/usr/local/emhttp/plugins/controlr/controlr
Dylan Vos commented
I got this when running the first command:
`root 15411 0.0 0.0 3904 2212 pts/0 S+ 16:11 0:00 grep controlr`
…________________________________
From: Juan B. Rodriguez <notifications@github.com>
Sent: Sunday, September 15, 2019 2:45:44 PM
To: jbrodriguez/controlr <controlr@noreply.github.com>
Cc: Dylan Vos <dylan@vossystems.nl>; Author <author@noreply.github.com>
Subject: Re: [jbrodriguez/controlr] ControlR Status stopped - can't access WebUI (#1)
Hi, try this ...
ps aux | grep controlr
this will output the command line for controlr
If that comes up empty, try
/usr/local/emhttp/plugins/controlr/controlr
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<#1?email_source=notifications&email_token=ABIB7VGW55B6SA4BWTOYIN3QJYU7RA5CNFSM4IWZXSUKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD6XQBNI#issuecomment-531562677>, or mute the thread<https://github.com/notifications/unsubscribe-auth/ABIB7VEZ7WFHQQEZISAX3D3QJYU7RANCNFSM4IWZXSUA>.
Juan B. Rodriguez commented
Right, so try the other command I mentioned
/usr/local/emhttp/plugins/controlr/controlr
Dylan Vos commented
Then I get this:
root@Server:~# /usr/local/emhttp/plugins/controlr/controlr
I: 2019/09/15 16:59:29 app.go:57: controlr v2019.03.28|2.16.0 starting ...
I: 2019/09/15 16:59:29 app.go:65: No config file specified. Using app defaults ...
I: 2019/09/15 16:59:29 app.go:214: cert: found Server_unraid_bundle.pem
I: 2019/09/15 16:59:29 core.go:73: starting service Core ...
I: 2019/09/15 16:59:29 core.go:268: Created system sensor ...
I: 2019/09/15 16:59:29 core.go:298: No ups detected ...
2019/09/15 16:59:29 Unable to wait for process to finish: exit status 1
…________________________________
From: Juan B. Rodriguez <notifications@github.com>
Sent: Sunday, September 15, 2019 4:57:20 PM
To: jbrodriguez/controlr <controlr@noreply.github.com>
Cc: Dylan Vos <dylan@vossystems.nl>; Author <author@noreply.github.com>
Subject: Re: [jbrodriguez/controlr] ControlR Status stopped - can't access WebUI (#1)
Right, so try the other command I mentioned
/usr/local/emhttp/plugins/controlr/controlr
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<#1?email_source=notifications&email_token=ABIB7VFZHCENFD6HEBGXBUTQJZENBA5CNFSM4IWZXSUKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD6XSODQ#issuecomment-531572494>, or mute the thread<https://github.com/notifications/unsubscribe-auth/ABIB7VFDLTKJNV3W6IFAGMLQJZENBANCNFSM4IWZXSUA>.
Juan B. Rodriguez commented
It seems to be failing at reading the system sensor.
Try this command
/usr/bin/sensors -A
what's the output ?
Dylan Vos commented
/usr/bin/sensors -A
Error: File /etc/sensors.d/sensors.conf, line 2: Undeclared bus id referenced
sensors_init: Can't parse bus name
…________________________________
From: Juan B. Rodriguez <notifications@github.com>
Sent: Sunday, September 15, 2019 5:48:13 PM
To: jbrodriguez/controlr <controlr@noreply.github.com>
Cc: Dylan Vos <dylan@vossystems.nl>; Author <author@noreply.github.com>
Subject: Re: [jbrodriguez/controlr] ControlR Status stopped - can't access WebUI (#1)
It seems to be failing at reading the system sensro.
Try this command
/usr/bin/sensors -A
what's the output ?
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<#1?email_source=notifications&email_token=ABIB7VHY6G4X6GIQGSHYGULQJZKL3A5CNFSM4IWZXSUKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD6XTNUY#issuecomment-531576531>, or mute the thread<https://github.com/notifications/unsubscribe-auth/ABIB7VFIOFC2OKYO7X7UTDTQJZKL3ANCNFSM4IWZXSUA>.
Juan B. Rodriguez commented
Right, that means there's some problem with your system sensor.
I know very little about that, post the output of the last command in an appropriate section of the unraid forum for troubleshooting
…On Sep 15, 2019, 11:09 -0500, dvdbot ***@***.***>, wrote:
/usr/bin/sensors -A
Error: File /etc/sensors.d/sensors.conf, line 2: Undeclared bus id referenced
sensors_init: Can't parse bus name
________________________________
From: Juan B. Rodriguez ***@***.***>
Sent: Sunday, September 15, 2019 5:48:13 PM
To: jbrodriguez/controlr ***@***.***>
Cc: Dylan Vos ***@***.***>; Author ***@***.***>
Subject: Re: [jbrodriguez/controlr] ControlR Status stopped - can't access WebUI (#1)
It seems to be failing at reading the system sensro.
Try this command
/usr/bin/sensors -A
what's the output ?
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<#1?email_source=notifications&email_token=ABIB7VHY6G4X6GIQGSHYGULQJZKL3A5CNFSM4IWZXSUKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD6XTNUY#issuecomment-531576531>, or mute the thread<https://github.com/notifications/unsubscribe-auth/ABIB7VFIOFC2OKYO7X7UTDTQJZKL3ANCNFSM4IWZXSUA>.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or mute the thread.