Omnik Datalogger OSError: [Errno 99] Address not available
florisdegroot opened this issue · comments
I am struggling with the Omnik Data logger Automation in HACS.
I am running Home Assistant running on a RPI and I have all software (HA-Core, Supervisor, HACS etc) updated to the latest releases.
I have:
- installed Appdaemon4
- updated /config/appdaemon/appdaemon.yaml (file appended as .txt)
- update /config/appdaemon/apps/apps.yaml (file appended as .txt)
- installed the integration DSMR with an Omnik v2.2. which is running and providing 5 sensors
But I have still an error in the Appdaemon4, see the last part of the log in appended log file
appdeamon log.log
appdaemon.txt
apps.txt
Do you need more info?
Can you advise me what I am missing or doing wrong.?
Kind regards,
It seems mqtt cannot connect. Create a username and password and add them to the mqtt plugin config. Make sure a mqtt server IP is added to the mqtt config.
Does the app run without output plugins configured?
Did you notice the Dutch wiki the website?
The error is not handled correctly at least.
Thanks for the quick reply. As you could see in the appdeamon.txt (yaml) file and the logfile I have used a mqtt username etc but I will make a new MQTT username and password and will retry. I will be back this evening.
…________________________________
From: Jan Bouwhuis ***@***.***>
Sent: Thursday, June 17, 2021 11:50:38 PM
To: jbouwh/omnikdatalogger ***@***.***>
Cc: Floris ***@***.***>; Author ***@***.***>
Subject: Re: [jbouwh/omnikdatalogger] Omnik Datalogger OSError: [Errno 99] Address not available (#2)
It seems mqtt cannot connect. Create a username and password and add them to the mqtt plugin config. Does the app run without output plugins configured?
Did jou notice the Dutch wiki the website?
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<#2 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AG3ZQV2FH45CXTJ3Q32JCM3TTJU25ANCNFSM464PDO5A>.
If you are using hassapi as input client, you will need to have a omnikdataloggerproxy setup to retrieve the updates using the binary sensor it creates. This is what omnikdatlogger is listening to.
Floris ***@***.***> schreef op 18 juni 2021 08:07:30 CEST:
…Thanks for the quick reply. As you could see in the appdeamon.txt
(yaml) file and the logfile I have used a mqtt username etc but I will
make a new MQTT username and password and will retry. I will be back
this evening.>
>
>
>
________________________________>
From: Jan Bouwhuis ***@***.***>>
Sent: Thursday, June 17, 2021 11:50:38 PM>
To: jbouwh/omnikdatalogger ***@***.***>>
Cc: Floris ***@***.***>; Author ***@***.***>>
Subject: Re: [jbouwh/omnikdatalogger] Omnik Datalogger OSError: [Errno
99] Address not available (#2)>
>
>
It seems mqtt cannot connect. Create a username and password and add
them to the mqtt plugin config. Does the app run without output plugins
configured?>
>
Did jou notice the Dutch wiki the website?>
>
—>
You are receiving this because you authored the thread.>
Reply to this email directly, view it on
GitHub<#2 (comment)>,
or
unsubscribe<https://github.com/notifications/unsubscribe-auth/AG3ZQV2FH45CXTJ3Q32JCM3TTJU25ANCNFSM464PDO5A>.>
>
>
-- >
You are receiving this because you were assigned.>
Reply to this email directly or view it on GitHub:>
#2 (comment)
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
1st I go to read and follow the instructions of the WIKI Dutch pages.
It looks that these are much more clear to me. Less options etc.
If I thereafter get again errors I will open again an issue.
Thanks for he support so far.
Van: Jan Bouwhuis ***@***.***>
Verzonden: vrijdag 18 juni 2021 08:17
Aan: jbouwh/omnikdatalogger ***@***.***>
CC: Floris ***@***.***>; Author ***@***.***>
Onderwerp: Re: [jbouwh/omnikdatalogger] Omnik Datalogger OSError: [Errno 99] Address not available (#2)
If you are using hassapi as input client, you will need to have a omnikdataloggerproxy setup to retrieve the updates using the binary sensor it creates. This is what omnikdatlogger is listening to.
Floris ***@***.*** <mailto:***@***.***> > schreef op 18 juni 2021 08:07:30 CEST:
…Thanks for the quick reply. As you could see in the appdeamon.txt
(yaml) file and the logfile I have used a mqtt username etc but I will
make a new MQTT username and password and will retry. I will be back
this evening.>
>
>
>
________________________________>
From: Jan Bouwhuis ***@***.*** <mailto:***@***.***> >>
Sent: Thursday, June 17, 2021 11:50:38 PM>
To: jbouwh/omnikdatalogger ***@***.*** <mailto:***@***.***> >>
Cc: Floris ***@***.*** <mailto:***@***.***> >; Author ***@***.*** <mailto:***@***.***> >>
Subject: Re: [jbouwh/omnikdatalogger] Omnik Datalogger OSError: [Errno
99] Address not available (#2)>
>
>
It seems mqtt cannot connect. Create a username and password and add
them to the mqtt plugin config. Does the app run without output plugins
configured?>
>
Did jou notice the Dutch wiki the website?>
>
—>
You are receiving this because you authored the thread.>
Reply to this email directly, view it on
GitHub<#2 (comment)>,
or
unsubscribe<https://github.com/notifications/unsubscribe-auth/AG3ZQV2FH45CXTJ3Q32JCM3TTJU25ANCNFSM464PDO5A>.>
>
>
-- >
You are receiving this because you were assigned.>
Reply to this email directly or view it on GitHub:>
#2 (comment)
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub <#2 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AG3ZQVZ2J4U2ZV5C74U4GHDTTLQFXANCNFSM464PDO5A> . <https://github.com/notifications/beacon/AG3ZQVZUTNSZAHSOZ2WMLH3TTLQFXA5CNFSM464PDO5KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOGN6FK3Q.gif>
v1.5.7 fixes crashing with an invalid MQTT config.
For more information about the config see:
https://github.com/jbouwh/omnikdatalogger/blob/main/info.md
https://github.com/jbouwh/omnikdatalogger#readme
or the website for a Dutch Wiki:
https://jbsoft.nl/site/dutch-only/