Dead links across document
previousserver opened this issue · comments
Server mod here and I'd like to chime in on a few dead links apart from the ones in #62.
Note: Thaiphoon is known to guess ICs, so it shouldn't be fully trusted. It's highly recommended to check the label on the sticks if possible.
See here for more info.
dead, looked around no backups
G.Skill 042 Code
Similar to Corsair, G.Skill uses a 042 code to indicate the ICs.
Example: 04213X8810B
The first bolded character is the density. 4 for 4 Gb, 8 for 8 Gb, and S for 16 Gb.
The second bolded number is the manufacturer. 1 for Samsung, 2 for Hynix, 3 for Micron, 4 for PSC (powerchip), 5 for Nanya, and 9 for JHICC.
The last character is the revision.
This is the code for Samsung 8 Gb B-die.
See the r/overclocking wiki for a full list.
wrong navigation (I was the one who made the breaking change a couple years ago 😅 and deleted my Reddit acc since), should be this
For Asus Maximus boards:
Play around with the Maximus Tweak Modes; sometimes, one will post where the other does not.
You can enable Round Trip Latency under Memory Training Algorithms to let the board attempt to train RTL and IOL values.
If you can't boot, you can try tweaking the skew control values.
More info here.
forums broken, no content loaded, archive.org copies are barely better (text only)
On Ryzen 3000 and 5000, 1usmus suggests 28Ω - 40Ω. Lower settings may be harder to run but potentially helps with voltage requirements.
dead
This value is not to exceed 1.10V on Ryzen 3000 and 5000, and should always be restricted to at least 0.10V less than DRAM Voltage.
Source: AMD
dead, archive avail
Impact of RAM on Intel's Skylake desktop architecture by KingFaris moved, should be this
Intel Memory Overclocking Quick Reference by sdch dead, archive avail
The road to overclocking memory without increasing voltage by Raja@ASUS broken, see above
