Low FPS with Android IP Webcam, MPJPG stream

[Google Code Exporter]

What steps will reproduce the problem?
1. Install IP Webcam (by Pavel Khlebovich) from the play store on your Android 
device
2. Configure and run the app
3. Connect to the app using http://a.b.c.d:8080/videofeed

What is the expected output? What do you see instead?

Expected Output: 25fps+ in iSpy.
Actual Output: Initial 15fps dropping to around 6fps

What version of the product are you using? On what operating system?
iSpy 4.8.4.0, Windows 7 Professional 64bit on an i7 950, 6G RAM, Intel SSD for 
recording onto.

Please provide any additional information below.

To eliminate the Android device as the bottleneck I also connected to the apps 
own web page to view the video feed - it appeared ok and was updating quickly.

I then configured ManyCam to connect to the Android device and used that as a 
video source in iSpy. I started to get 25fps in iSpy.

I've tried this now on an LG Optimus L3, a Motorola Xoom, and a Samsung Galaxy 
S3 - all give roughly between 4 - 7fps in iSpy and 25fps+ when iSpy is using 
the ManyCam source.

Original issue reported on code.google.com by [e-mail] on 19 Mar 2013 at 11:39

[Google Code Exporter]

Please see this to help with the fix
http://foscam.us/forum/low-fps-on-foscam-cameras-t1088-10.html#p4912

Excerp

Official answer from foscam engineers
Our engineers installed iSPY to test,it is really 4Fps. 
The reason is as this third party software based on the CGI command,using the 
CGI command to get the audio and video data. 
Network processing section using up much CPU source,but for the IE active x,is 
based on the bottom protocol,so there is no problem with our IE active x to get 
15 Fps. 
The solution is: 
1.Unless iSPY can base on our SDK,according to our bottom protocol.

Original comment by [e-mail] on 21 Jul 2013 at 5:12