Giters

holodeck-b2b / Holodeck-B2B

Holodeck B2B is an AS4 system-to-system messaging solution that implements the OASIS specifications for ebMS3 and it's AS4 profile. For more information visit the project website

Home Page:http://holodeck-b2b.org

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

I can not succeed in sending simple pm-push message

sharkillator opened this issue · comments

commented

Hello,

I tried the first example (pm-push) but I always get a failure with this message in data/msg_in after the try (No firewall, A on 8080 and B on 9090, P-modes defined in repositories) :

<eb3:Messaging xmlns:eb3="http://docs.oasis-open.org/ebxml-msg/ebms/v3.0/ns/core/200704/"><eb3:SignalMessage><eb3:MessageInfo><eb3:Timestamp>2022-06-10T09:39:59.196Z</eb3:Timestamp><eb3:MessageId>3e14cafa-aa9f-47a6-8bc5-0661c2f18571@h-3fe29c7e4b09fef0.3fe320aa5c68a20b</eb3:MessageId><eb3:RefToMessageId>099eea41-cb4e-4e77-8142-a801546794ff@h-3fe29c7e4b09fef0.3fe320aa5c68a20b</eb3:RefToMessageId></eb3:MessageInfo><eb3:Error errorCode="EBMS:0010" severity="failure" origin="ebms" category="Processing" refToMessageInError="099eea41-cb4e-4e77-8142-a801546794ff@h-3fe29c7e4b09fef0.3fe320aa5c68a20b" shortDescription="ProcessingModeMismatch"><eb3:ErrorDetail>Can not process message because no P-Mode was found for the message!</eb3:ErrorDetail></eb3:Error></eb3:SignalMessage></eb3:Messaging>

commented

Logs :
2022-06-13 08:41:59,276 (pool-2-thread-4)[DEBUG] org.holodeckb2b.core.submission.MessageSubmitter - Start submission of new User Message
2022-06-13 08:41:59,276 (pool-2-thread-4)[TRACE] org.holodeckb2b.core.submission.MessageSubmitter - Get the P-Mode for the message
2022-06-13 08:41:59,277 (pool-2-thread-4)[DEBUG] org.holodeckb2b.core.submission.MessageSubmitter - Found P-Mode: pm-push
2022-06-13 08:41:59,277 (pool-2-thread-4)[TRACE] org.holodeckb2b.core.submission.MessageSubmitter - Check for completeness: combined with P-Mode all info must be known
2022-06-13 08:41:59,277 (pool-2-thread-4)[TRACE] org.holodeckb2b.core.submission.MessageSubmitter - Checking availability of payloads
2022-06-13 08:41:59,277 (pool-2-thread-4)[TRACE] org.holodeckb2b.core.submission.MessageSubmitter - Validate submitted message if specified
2022-06-13 08:41:59,277 (pool-2-thread-4)[TRACE] org.holodeckb2b.core.submission.MessageSubmitter - No custom validation specified for submitted message
2022-06-13 08:41:59,280 (pool-2-thread-4)[TRACE] org.holodeckb2b.core.submission.MessageSubmitter - Copying payload [C:\Users\m.lefrancois\OneDrive - ONEPOINT\Bureau\holodeckb2b-A-5.3.2\data\msg_out\payloads\dandelion.jpg] to internal directory
2022-06-13 08:41:59,282 (pool-2-thread-4)[DEBUG] org.holodeckb2b.core.submission.MessageSubmitter - Copied all payloads to internal directory
2022-06-13 08:41:59,283 (pool-2-thread-4)[TRACE] org.holodeckb2b.core.submission.MessageSubmitter - Add message to database
2022-06-13 08:41:59,289 (pool-2-thread-4)[DEBUG] org.holodeckb2b.core.submission.MessageSubmitter - Message is to be pushed to receiver, change ProcessingState to trigger push
2022-06-13 08:41:59,294 (pool-2-thread-4)[INFO ] org.holodeckb2b.core.submission.MessageSubmitter - User Message succesfully submitted, messageId=e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b
2022-06-13 08:41:59,294 (pool-2-thread-4)[INFO ] org.holodeckb2b.backend.file.SubmitOperation - User message from mmd-push.mmd succesfully submitted to Holodeck B2B
2022-06-13 08:41:59,412 (pool-2-thread-2)[TRACE] org.holodeckb2b.core.axis2.Axis2Sender - Starting send operation for User Message (msgId=e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b)
2022-06-13 08:41:59,412 (pool-2-thread-2)[TRACE] org.holodeckb2b.core.axis2.Axis2Sender - Check PMode.MEPBinding which Service should be used
2022-06-13 08:41:59,412 (pool-2-thread-2)[DEBUG] org.holodeckb2b.core.axis2.Axis2Sender - Using as4 Service to send User Message [msgId=e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.core.axis2.Axis2Sender - Create an empty IMessageProcessingContext for message with current configuration
2022-06-13 08:41:59,413 (pool-2-thread-2)[DEBUG] org.holodeckb2b.core.axis2.Axis2Sender - Start send process for User Message [msgId=e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_OUT_FLOW.CatchFaults - Start processing
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_OUT_FLOW.CatchFaults - End processing
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSOAPEnvelope - Start processing
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSOAPEnvelope - Check for SOAP version
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSOAPEnvelope - Use P-Mode of primary message unit to get SOAP version
2022-06-13 08:41:59,413 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSOAPEnvelope - Create SOAP 1.2 envelope
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSOAPEnvelope - Added SOAP envelope to message context
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSOAPEnvelope - Add empty eb3:Messaging element
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSOAPEnvelope - End processing
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AddPayloads - Start processing
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AddPayloads - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AddPayloads - Check that all meta-data of the User Message is available for processing
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AddPayloads - All meta-data of User Message available, check for payloads to include
2022-06-13 08:41:59,413 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AddPayloads - User message contains 1 payload(s)
2022-06-13 08:41:59,414 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AddPayloads - Generated a new Content-id [e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e-1608742414@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] for payload [C:\Users\m.lefrancois\OneDrive - ONEPOINT\Bureau\holodeckb2b-A-5.3.2\temp\plcout\dandelion-18.jpg]
2022-06-13 08:41:59,414 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AddPayloads - Adding payload as attachment. Content located at C:\Users\m.lefrancois\OneDrive - ONEPOINT\Bureau\holodeckb2b-A-5.3.2\temp\plcout\dandelion-18.jpg
2022-06-13 08:41:59,414 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AddPayloads - Payload mime type is image/jpeg
2022-06-13 08:41:59,414 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AddPayloads - Add payload to message as attachment with Content-id: e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e-1608742414@h-3fe29c7e4b09fef0.3fe320aa5c68a20b
2022-06-13 08:41:59,414 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AddPayloads - Payload content located at 'C:\Users\m.lefrancois\OneDrive - ONEPOINT\Bureau\holodeckb2b-A-5.3.2\temp\plcout\dandelion-18.jpg' added to message
2022-06-13 08:41:59,420 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AddPayloads - Generated MIME Content-Id(s) saved to database
2022-06-13 08:41:59,420 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AddPayloads - Payloads successfully added to User Message [msgId=e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,420 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AddPayloads - End processing
2022-06-13 08:41:59,420 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AS4Compression - Start processing
2022-06-13 08:41:59,420 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AS4Compression - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,420 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AS4Compression - Check P-Mode configuration if AS4 compression must be used
2022-06-13 08:41:59,420 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AS4Compression - AS4 Compression feature is used
2022-06-13 08:41:59,420 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AS4Compression - Enabled compression for all attached payloads
2022-06-13 08:41:59,420 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.AS4Compression - End processing
2022-06-13 08:41:59,420 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.PackageUserMessage - Start processing
2022-06-13 08:41:59,420 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.PackageUserMessage - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,420 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.PackageUserMessage - Get the eb:Messaging header from the message
2022-06-13 08:41:59,420 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.PackageUserMessage - Add eb:UserMessage element to the existing eb:Messaging header
2022-06-13 08:41:59,421 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.PackageUserMessage - eb:UserMessage element for User Message [msgId=e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] succesfully added to header
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.PackageUserMessage - End processing
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.PackageErrorSignals - Start processing
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.PackageErrorSignals - End processing
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.PackageReceipt - Start processing
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.PackageReceipt - End processing
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.PackagePullRequest - Start processing
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.PackagePullRequest - End processing
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.ConfigureMultiHop - Start processing
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.ConfigureMultiHop - Primary message is a non multi-hop UserMessage
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.ConfigureMultiHop - End processing
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSecurityHeaders - Start processing
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSecurityHeaders - Get the primary message unit for this message
2022-06-13 08:41:59,421 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSecurityHeaders - Using P-Mode [pm-push] of primary message unit [e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] to create security headers
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSecurityHeaders - Prepared security configuration based on P-Mode [pm-push] of the primary message unit [e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,421 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSecurityHeaders - Get security header creator from security provider
2022-06-13 08:41:59,421 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSecurityHeaders - Create the security headers in the message
2022-06-13 08:41:59,421 (pool-2-thread-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderCreator - Converting envelope to DOM structure for processing
2022-06-13 08:41:59,423 (pool-2-thread-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderCreator - Set up security engine configuration
2022-06-13 08:41:59,423 (pool-2-thread-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderCreator - Setup configuration for default header
2022-06-13 08:41:59,423 (pool-2-thread-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderCreator - No default WSS header needed
2022-06-13 08:41:59,423 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSecurityHeaders - Security header creation finished, handle results
2022-06-13 08:41:59,423 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CreateSecurityHeaders - End processing
2022-06-13 08:41:59,424 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.ConfigureHTTP - Start processing
2022-06-13 08:41:59,424 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.ConfigureHTTP - Get P-Mode configuration for primary MU
2022-06-13 08:41:59,424 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.ConfigureHTTP - Destination URL=http://localhost:9090/holodeckb2b/as4
2022-06-13 08:41:59,424 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.ConfigureHTTP - Disable chunked transfer-encoding
2022-06-13 08:41:59,424 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.ConfigureHTTP - HTTP configuration done
2022-06-13 08:41:59,424 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.ConfigureHTTP - End processing
2022-06-13 08:41:59,424 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CheckSentResult - Start processing
2022-06-13 08:41:59,429 (pool-2-thread-2)[INFO ] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CheckSentResult - User Message with msg-id [e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] is being sent
2022-06-13 08:41:59,429 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CheckSentResult - End processing
2022-06-13 08:41:59,429 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.SOAPLog - Start processing
2022-06-13 08:41:59,430 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.SOAPLog - End processing
2022-06-13 08:41:59,442 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.core.axis2.HTTPWorker - Handling request for URL: /holodeckb2b/as4
2022-06-13 08:41:59,442 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.core.axis2.HTTPWorker - Find Service for request URL: /holodeckb2b/as4
2022-06-13 08:41:59,442 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.core.axis2.HTTPWorker - POST request for service as4
2022-06-13 08:41:59,442 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.core.axis2.HTTPWorker - No specific Builder specified, use default Axis2 process
2022-06-13 08:41:59,443 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.core.axis2.HTTPWorker - Using SOAP message builder
2022-06-13 08:41:59,444 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.CatchFaults - Start processing
2022-06-13 08:41:59,444 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.CatchFaults - End processing
2022-06-13 08:41:59,444 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.SOAPLog - Start processing
2022-06-13 08:41:59,445 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.SOAPLog - End processing
2022-06-13 08:41:59,445 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadUserMessage - Start processing
2022-06-13 08:41:59,445 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadUserMessage - Check for UserMessage element
2022-06-13 08:41:59,445 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadUserMessage - UserMessage found, read information from message
2022-06-13 08:41:59,446 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadUserMessage - Succesfully read user message meta data from header. Msg-id=e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b
2022-06-13 08:41:59,446 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadUserMessage - Saving user message meta data to database and message context
2022-06-13 08:41:59,450 (HttpConnection-9090-2)[INFO ] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadUserMessage - User message with msgId e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b succesfully read
2022-06-13 08:41:59,450 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadUserMessage - End processing
2022-06-13 08:41:59,450 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadPullRequest - Start processing
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadPullRequest - Check for PullRequest element to determine if message contains pull request
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadPullRequest - End processing
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadReceipts - Start processing
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadReceipts - Check for Receipt elements to determine if message contains one or more receipts
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadReceipts - End processing
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadErrors - Start processing
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadErrors - Check for Error elements to determine if message contains one or more errors
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ReadErrors - End processing
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.CheckForMultiHop - Start processing
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.CheckForMultiHop - End processing
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.FindPModes - Start processing
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.FindPModes - Finding P-Mode for User Message [e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[WARN ] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.FindPModes - No P-Mode found for User Message [e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,451 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.FindPModes - Set the processing state of this User Message to failure
2022-06-13 08:41:59,456 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.FindPModes - End processing
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.HeaderValidation - Start processing
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.HeaderValidation - Validate User Message header meta-data using basic validation
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.core.validation.DefaultValidationExecutor - Creating validator [IUserMessage-lax]
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.core.validation.DefaultValidationExecutor - Initialize the factory
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.core.validation.DefaultValidationExecutor - And create a validator
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.core.validation.DefaultValidationExecutor - Validating the message using validator IUserMessage-lax
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.core.validation.DefaultValidationExecutor - Messagge successfully validated by [IUserMessage-lax]
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.core.validation.DefaultValidationExecutor - Successfully validated message unit [e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.HeaderValidation - Header of User Message [e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] successfully validated
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.HeaderValidation - End processing
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessSecurityHeaders - Start processing
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessSecurityHeaders - Get P-Mode of primary message unit for settings
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[WARN ] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessSecurityHeaders - No P-Mode available for security setting.
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessSecurityHeaders - Get security header processor from security provider
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessSecurityHeaders - Process the available security headers in the message
2022-06-13 08:41:59,457 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Converting envelope to DOM structure for processing
2022-06-13 08:41:59,459 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Prepare WSS4J context for processing of the security headers
2022-06-13 08:41:59,463 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Process the default WS-Security header
2022-06-13 08:41:59,463 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Message does not contain WS-Security header targeted to DEFAULT role.
2022-06-13 08:41:59,463 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Succesfully processed the default WS-Security header
2022-06-13 08:41:59,463 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Process the ebms WS-Security header
2022-06-13 08:41:59,463 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Message does not contain WS-Security header targeted to EBMS role.
2022-06-13 08:41:59,463 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Succesfully processed the ebms WS-Security header
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Mark security headers as processed
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessSecurityHeaders - Message did not contain security headers
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessSecurityHeaders - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.CheckSignatureCompleteness - Start processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.CheckSignatureCompleteness - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.CheckSignatureCompleteness - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.AuthorizeMessage - Start processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.AuthorizeMessage - Get P-Mode for message unit [e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] and check if authorization is used
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.AuthorizeMessage - No P-Mode found for message unit [e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b], nothing to check!
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.AuthorizeMessage - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.AS4DeCompression - Start processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.AS4DeCompression - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.AS4DeCompression - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.SavePayloads - Start processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.SavePayloads - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.SavePayloads - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.AuthorizePullRequest - Start processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.AuthorizePullRequest - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.RetrievePulledMessage - Start processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.RetrievePulledMessage - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.StartProcessingUsrMsg - Start processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.StartProcessingUsrMsg - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.StartProcessingUsrMsg - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.EnsureSigning - Start processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.EnsureSigning - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.EnsureSigning - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.DuplicateCheck - Start processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.DuplicateCheck - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.DuplicateCheck - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.CustomValidation - Start processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.CustomValidation - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.CustomValidation - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.DeliverUserMessage - Start processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.DeliverUserMessage - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.DeliverUserMessage - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.ProcessReceipts - Start processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.ProcessReceipts - Check for received receipts in message.
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.ProcessReceipts - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.DeliverReceipts - Start processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.DeliverReceipts - End processing
2022-06-13 08:41:59,464 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.ProcessErrors - Start processing
2022-06-13 08:41:59,465 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.ProcessErrors - Check for received errors in message.
2022-06-13 08:41:59,465 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.ProcessErrors - End processing
2022-06-13 08:41:59,465 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.DeliverErrors - Start processing
2022-06-13 08:41:59,465 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_IN_FLOW.DeliverErrors - End processing
2022-06-13 08:41:59,465 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.CreateReceipt - Start processing
2022-06-13 08:41:59,465 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.CreateReceipt - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,465 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.CreateReceipt - End processing
2022-06-13 08:41:59,465 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessGeneratedErrors - Start processing
2022-06-13 08:41:59,465 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessGeneratedErrors - Check if errors were generated
2022-06-13 08:41:59,465 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessGeneratedErrors - Processing error(s) generated during this in flow
2022-06-13 08:41:59,465 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessGeneratedErrors - Creating new Error Signal for errors referencing messsage unit with msgId=e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b
2022-06-13 08:41:59,465 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessGeneratedErrors - Saving new Error Signal in database
2022-06-13 08:41:59,468 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessGeneratedErrors - Determine P-Mode for new Error Signal
2022-06-13 08:41:59,468 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.ProcessGeneratedErrors - End processing
2022-06-13 08:41:59,468 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.DetermineErrorReporting - Start processing
2022-06-13 08:41:59,468 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.DetermineErrorReporting - Check if error signals were generated
2022-06-13 08:41:59,468 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.DetermineErrorReporting - 1 error signal(s) were generated during processing
2022-06-13 08:41:59,468 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.DetermineErrorReporting - Error Signal [msgId=eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] should be send as response
2022-06-13 08:41:59,468 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_IN_FLOW.DetermineErrorReporting - End processing
2022-06-13 08:41:59,468 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_OUT_FLOW.CatchFaults - Start processing
2022-06-13 08:41:59,468 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.core.RESPONSE_OUT_FLOW.CatchFaults - End processing
2022-06-13 08:41:59,468 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PrepareResponseMessage - Start processing
2022-06-13 08:41:59,468 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PrepareResponseMessage - Check for error signals generated during in flow to be included
2022-06-13 08:41:59,468 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PrepareResponseMessage - End processing
2022-06-13 08:41:59,468 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CreateSOAPEnvelope - Start processing
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CreateSOAPEnvelope - Check for SOAP version
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CreateSOAPEnvelope - Get version from request context
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CreateSOAPEnvelope - Create SOAP 1.2 envelope
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CreateSOAPEnvelope - Added SOAP envelope to message context
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CreateSOAPEnvelope - Add empty eb3:Messaging element
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CreateSOAPEnvelope - End processing
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.AddPayloads - Start processing
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.AddPayloads - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.AddPayloads - End processing
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.AS4Compression - Start processing
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.AS4Compression - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.AS4Compression - End processing
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackageUserMessage - Start processing
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackageUserMessage - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackageUserMessage - End processing
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackageErrorSignals - Start processing
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackageErrorSignals - Adding 1 error signal(s) to the message
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackageErrorSignals - Get the eb:Messaging header from the message
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackageErrorSignals - Make sure that all meta-data on the error is loaded
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackageErrorSignals - Add eb:SignalMessage element to the existing eb:Messaging header
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackageErrorSignals - eb:SignalMessage element for Error Signal [msgId=eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] succesfully added to header
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackageErrorSignals - End processing
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackageReceipt - Start processing
2022-06-13 08:41:59,469 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackageReceipt - End processing
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackagePullRequest - Start processing
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.PackagePullRequest - End processing
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.ConfigureMultiHop - Start processing
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.ConfigureMultiHop - Primary message unit is response signal to non (multi-hop) User Message
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.ConfigureMultiHop - End processing
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CreateSecurityHeaders - Start processing
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CreateSecurityHeaders - Get the primary message unit for this message
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[WARN ] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CreateSecurityHeaders - No P-Mode available for Error Message [eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b], can not create security headers!
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CreateSecurityHeaders - End processing
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.ConfigureHTTP - Start processing
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.ConfigureHTTP - Get P-Mode configuration for primary MU
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.ConfigureHTTP - No P-Mode given for primary message unit, using default HTTP configuration
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.ConfigureHTTP - End processing
2022-06-13 08:41:59,470 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CheckSentResult - Start processing
2022-06-13 08:41:59,473 (HttpConnection-9090-2)[INFO ] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CheckSentResult - Error Message with msg-id [eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] is being sent
2022-06-13 08:41:59,473 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CheckSentResult - End processing
2022-06-13 08:41:59,473 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.SOAPLog - Start processing
2022-06-13 08:41:59,474 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.SOAPLog - End processing
2022-06-13 08:41:59,474 (HttpConnection-9090-2)[TRACE] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CheckSentResult - Check result of sent operation
2022-06-13 08:41:59,474 (HttpConnection-9090-2)[DEBUG] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CheckSentResult - The sent operation was successful
2022-06-13 08:41:59,477 (HttpConnection-9090-2)[INFO ] org.holodeckb2b.msgproc.AS4.RESPONSE_OUT_FLOW.CheckSentResult - Processing state for message unit [eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] changed to DELIVERED
2022-06-13 08:41:59,479 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CheckSentResult - Check result of sent operation
2022-06-13 08:41:59,479 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CheckSentResult - The sent operation was successful
2022-06-13 08:41:59,479 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CheckSentResult - User Message is sent, check P-Mode if Receipt is expected
2022-06-13 08:41:59,484 (pool-2-thread-2)[INFO ] org.holodeckb2b.msgproc.AS4.REQUEST_OUT_FLOW.CheckSentResult - Processing state for message unit [e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] changed to AWAITING_RECEIPT
2022-06-13 08:41:59,486 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.CatchFaults - Start processing
2022-06-13 08:41:59,486 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.CatchFaults - End processing
2022-06-13 08:41:59,486 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.SOAPLog - Start processing
2022-06-13 08:41:59,487 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.SOAPLog - End processing
2022-06-13 08:41:59,487 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadUserMessage - Start processing
2022-06-13 08:41:59,487 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadUserMessage - Check for UserMessage element
2022-06-13 08:41:59,487 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadUserMessage - End processing
2022-06-13 08:41:59,487 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadPullRequest - Start processing
2022-06-13 08:41:59,487 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadPullRequest - Check for PullRequest element to determine if message contains pull request
2022-06-13 08:41:59,487 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadPullRequest - End processing
2022-06-13 08:41:59,487 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadReceipts - Start processing
2022-06-13 08:41:59,487 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadReceipts - Check for Receipt elements to determine if message contains one or more receipts
2022-06-13 08:41:59,487 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadReceipts - End processing
2022-06-13 08:41:59,487 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadErrors - Start processing
2022-06-13 08:41:59,487 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadErrors - Check for Error elements to determine if message contains one or more errors
2022-06-13 08:41:59,487 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadErrors - Error Signal(s) found, read information from message
2022-06-13 08:41:59,488 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadErrors - Succesfully read Error message meta data from header. Msg-id=eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b
2022-06-13 08:41:59,488 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadErrors - Store Error Signal in database and message context
2022-06-13 08:41:59,490 (pool-2-thread-2)[INFO ] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadErrors - Error signal with msgId eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b succesfully read
2022-06-13 08:41:59,490 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ReadErrors - End processing
2022-06-13 08:41:59,490 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.CheckForMultiHop - Start processing
2022-06-13 08:41:59,491 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.CheckForMultiHop - End processing
2022-06-13 08:41:59,491 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.FindPModes - Start processing
2022-06-13 08:41:59,491 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.FindPModes - Message contains 1 Error Signals, finding P-Modes
2022-06-13 08:41:59,492 (pool-2-thread-2)[INFO ] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.FindPModes - Found P-Mode [pm-push] for Error Signal [eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,494 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.FindPModes - End processing
2022-06-13 08:41:59,494 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.HeaderValidation - Start processing
2022-06-13 08:41:59,494 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.HeaderValidation - Validate Error Message header meta-data using basic validation
2022-06-13 08:41:59,494 (pool-2-thread-2)[TRACE] org.holodeckb2b.core.validation.DefaultValidationExecutor - Creating validator [IErrorMessage-lax]
2022-06-13 08:41:59,494 (pool-2-thread-2)[TRACE] org.holodeckb2b.core.validation.DefaultValidationExecutor - Initialize the factory
2022-06-13 08:41:59,494 (pool-2-thread-2)[TRACE] org.holodeckb2b.core.validation.DefaultValidationExecutor - And create a validator
2022-06-13 08:41:59,494 (pool-2-thread-2)[DEBUG] org.holodeckb2b.core.validation.DefaultValidationExecutor - Validating the message using validator IErrorMessage-lax
2022-06-13 08:41:59,494 (pool-2-thread-2)[DEBUG] org.holodeckb2b.core.validation.DefaultValidationExecutor - Messagge successfully validated by [IErrorMessage-lax]
2022-06-13 08:41:59,494 (pool-2-thread-2)[DEBUG] org.holodeckb2b.core.validation.DefaultValidationExecutor - Successfully validated message unit [eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,494 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.HeaderValidation - Header of Error Message [eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] successfully validated
2022-06-13 08:41:59,495 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.HeaderValidation - End processing
2022-06-13 08:41:59,495 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ProcessSecurityHeaders - Start processing
2022-06-13 08:41:59,495 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ProcessSecurityHeaders - Get P-Mode of primary message unit for settings
2022-06-13 08:41:59,495 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ProcessSecurityHeaders - PMode to use for security processing : pm-push
2022-06-13 08:41:59,495 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ProcessSecurityHeaders - Prepared security configuration based on P-Mode [pm-push] of the primary message unit [eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,495 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ProcessSecurityHeaders - Get security header processor from security provider
2022-06-13 08:41:59,495 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ProcessSecurityHeaders - Process the available security headers in the message
2022-06-13 08:41:59,495 (pool-2-thread-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Converting envelope to DOM structure for processing
2022-06-13 08:41:59,496 (pool-2-thread-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Prepare WSS4J context for processing of the security headers
2022-06-13 08:41:59,499 (pool-2-thread-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Process the default WS-Security header
2022-06-13 08:41:59,499 (pool-2-thread-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Message does not contain WS-Security header targeted to DEFAULT role.
2022-06-13 08:41:59,499 (pool-2-thread-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Succesfully processed the default WS-Security header
2022-06-13 08:41:59,499 (pool-2-thread-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Process the ebms WS-Security header
2022-06-13 08:41:59,499 (pool-2-thread-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Message does not contain WS-Security header targeted to EBMS role.
2022-06-13 08:41:59,499 (pool-2-thread-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Succesfully processed the ebms WS-Security header
2022-06-13 08:41:59,500 (pool-2-thread-2)[DEBUG] org.holodeckb2b.ebms3.security.SecurityHeaderProcessor - Mark security headers as processed
2022-06-13 08:41:59,500 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ProcessSecurityHeaders - Message did not contain security headers
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ProcessSecurityHeaders - End processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.CheckSignatureCompleteness - Start processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.CheckSignatureCompleteness - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.CheckSignatureCompleteness - End processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.AuthorizeMessage - Start processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.AuthorizeMessage - Get P-Mode for message unit [eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] and check if authorization is used
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.AuthorizeMessage - Check security configuration for received message
2022-06-13 08:41:59,500 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.AuthorizeMessage - No authorization of message unit [eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] required
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.AuthorizeMessage - End processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.AS4DeCompression - Start processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.AS4DeCompression - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.AS4DeCompression - End processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.SavePayloads - Start processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.SavePayloads - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.SavePayloads - End processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.AuthorizePullRequest - Start processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.AuthorizePullRequest - End processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.RetrievePulledMessage - Start processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.RetrievePulledMessage - End processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.StartProcessingUsrMsg - Start processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.StartProcessingUsrMsg - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.StartProcessingUsrMsg - End processing
2022-06-13 08:41:59,500 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.EnsureSigning - Start processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.EnsureSigning - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.EnsureSigning - End processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DuplicateCheck - Start processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DuplicateCheck - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DuplicateCheck - End processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.CustomValidation - Start processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.CustomValidation - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.CustomValidation - End processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverUserMessage - Start processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverUserMessage - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverUserMessage - End processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessReceipts - Start processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessReceipts - Check for received receipts in message.
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessReceipts - End processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverReceipts - Start processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverReceipts - End processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessErrors - Start processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessErrors - Check for received errors in message.
2022-06-13 08:41:59,501 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessErrors - Message contains 1 Error signals, start processing
2022-06-13 08:41:59,501 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessErrors - Start processing Error Signal [msgId=eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,506 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessErrors - Get referenced message unit(s)
2022-06-13 08:41:59,506 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessErrors - Error Signal [eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] references messageId: e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b
2022-06-13 08:41:59,506 (pool-2-thread-2)[INFO ] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessErrors - Received an Error Signal for User Message [msgId=e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] with severity failure, message has not been processed by receiver!
2022-06-13 08:41:59,506 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessErrors - Error level is failure, set processing state of referenced message [e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] to failure
2022-06-13 08:41:59,511 (pool-2-thread-2)[INFO ] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessErrors - Processed Error Signal [eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,514 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessErrors - All Error Signals processed
2022-06-13 08:41:59,514 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.ProcessErrors - End processing
2022-06-13 08:41:59,515 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverErrors - Start processing
2022-06-13 08:41:59,515 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverErrors - Prepare Error Signal [eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] for delivery
2022-06-13 08:41:59,518 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverErrors - Start delivery of Error Signal [eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,518 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverErrors - Get delivery specification for error from P-Mode of refd message [msgId=e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]
2022-06-13 08:41:59,519 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverErrors - Error Signal should be delivered using delivery specification with id:pm-push-113903-DefaultDelivery-0
2022-06-13 08:41:59,519 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverErrors - Delivering the error using deliverer
2022-06-13 08:41:59,519 (pool-2-thread-2)[TRACE] org.holodeckb2b.core.HolodeckB2BCoreImpl - Check if there is a factory available for this specification [pm-push-113903-DefaultDelivery-0]
2022-06-13 08:41:59,519 (pool-2-thread-2)[TRACE] org.holodeckb2b.core.HolodeckB2BCoreImpl - Get and return deliverer from the factory
2022-06-13 08:41:59,521 (pool-2-thread-2)[TRACE] org.holodeckb2b.backend.file.delivers.EbmsFileDeliverer - Add error meta data to XML
2022-06-13 08:41:59,521 (pool-2-thread-2)[TRACE] org.holodeckb2b.backend.file.delivers.EbmsFileDeliverer - Added signal meta data to XML, write to file
2022-06-13 08:41:59,526 (pool-2-thread-2)[DEBUG] org.holodeckb2b.backend.file.delivers.EbmsFileDeliverer - Signal message with msgID=eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b successfully delivered
2022-06-13 08:41:59,526 (pool-2-thread-2)[INFO ] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverErrors - Error Signal [msgId= eea91578-4940-4668-9138-18cbe66e8e2e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b] successfully delivered for referenced message unit [msgId=e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]!
2022-06-13 08:41:59,526 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverErrors - Reported Error Signal for all referenced message units
2022-06-13 08:41:59,529 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverErrors - Processed all Error signals in message
2022-06-13 08:41:59,529 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.core.REQUEST_IN_FLOW.DeliverErrors - End processing
2022-06-13 08:41:59,529 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.CreateReceipt - Start processing
2022-06-13 08:41:59,529 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.CreateReceipt - Check if MessageContext contains a MessageUnit
2022-06-13 08:41:59,529 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.CreateReceipt - End processing
2022-06-13 08:41:59,530 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ProcessGeneratedErrors - Start processing
2022-06-13 08:41:59,530 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ProcessGeneratedErrors - Check if errors were generated
2022-06-13 08:41:59,530 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ProcessGeneratedErrors - No errors were generated during this in flow
2022-06-13 08:41:59,530 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.ProcessGeneratedErrors - End processing
2022-06-13 08:41:59,530 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.DetermineErrorReporting - Start processing
2022-06-13 08:41:59,530 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.DetermineErrorReporting - Check if error signals were generated
2022-06-13 08:41:59,530 (pool-2-thread-2)[DEBUG] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.DetermineErrorReporting - No error signals were generated
2022-06-13 08:41:59,530 (pool-2-thread-2)[TRACE] org.holodeckb2b.msgproc.AS4.REQUEST_IN_FLOW.DetermineErrorReporting - End processing
2022-06-13 08:41:59,530 (pool-2-thread-2)[DEBUG] org.holodeckb2b.core.axis2.Axis2Sender - Finished send process for User Message [msgId=e0b8ee54-ab68-4b0c-adc8-2adebe8fdb1e@h-3fe29c7e4b09fef0.3fe320aa5c68a20b]