auto_xmr

Trying to automate as much of the Vega XMR mining shenanigans as possible. All the config files (amd.txt, OverdriveNTool.ini) in this repo are based on a 6x Vega rig (5x Vega FE and 1x Vega 64).

This repo assumes you have everything else setup and working (i.e. drivers, device detection, etc).

What does this do?

The scripts in this repo automate several pre-mining tasks to save a lot of clicking/typing:

mine.ps1 - runs the following 3 things:
- devcon.ps1 - disables and re-enables Vega display adapters using devcon.exe.
  - Runs ulps_crossfire.ps1 after each enable/disable.
- OverdriveNtool.exe - sets the card profiles. You will probably want to overwrite the OverdriveNtool.ini with yours and modify the line in mine.ps1 that sets the profiles
- xmr-stak.exe - runs xmr-stak in AMD only mode

If this helped you, consider donating. Thanks!

XMR: 42TtmJxMEReSPiU39tUwFZ84KpFSpzdhuHstkzuTCipTdAuFqh7eMtk6b4zSLvfWZDA26aMKVTynYNVX19996DJx5uJugZm

Prerequisites

xmr_stak
OverdriveNTool
Windows DK (for devcon.exe)
Powershell
git-scm
I'm running Windows 10 Pro x64

1. Clone this repo to C:\

I recommend https://git-scm.com

2. Allow Powershell script execution

Make sure you enable script execution in Group Policy (gp so the powershell scripts can run (and so it persists on reboots). Set it to "Allow local and remote signed scripts". If you are paranoid, you can also enable this for just the User.

Computer Configuration
-Administrative Templates
  -Windows Components
    -Windows PowerShell -> Turn on Script Execution >

3. Make sure your binaries are in place

Look at mine.ps1 and devcon.ps1 for where everything should be.

xmr_stak installation in C:\auto_monero\miner
OverdrivenTool.exe in C:\auto_monero\overdriventool

4. Run mine.ps1

Make sure you Run as Administrator!

mine.ps1 runs mine.bat which starts xmr_stak.exe. If you don't want it to start xmr_stak.exe and only do devcon.exe and OverdriveNtool.exe, remove that line in mine.ps1

Footnotes

Additional configuration - may or may not be related to your setup

Monitoring

monitoring/hashrate_poller.py - can be used to poll the xmr_stak web interface and ship data to Graphite. Only tested on Ubuntu 16.04.

Dealing with Vega Frontier Edition enable/disable

This is what I had to do to get things setup (I followed Geek Mark's FE video on youtube with some changes):

Make sure you have remote desktop or Chrome remote desktop enabled!
Boot into safe mode and DDU every driver (including onboard) - at this point, it's ok to be plugged into one of the cards
Unplug all cards except one FE and boot
Install adrenaline driver only - run ulps_crossfire.ps1 to disable Crossfire and Ulps
Unplug your monitor and everything resembling one!
Plug the other cards in
Run ulps_crossfire.ps1 again to disable Crossfire and Ulps and reboot
Make sure settings stick on reboot
Disable all cards in Device Manager except for one - I pick an FE usually
Choose Update Driver and select the blockchain driver using "Have Disk"
When it's done, they should all be enabled. Run devcon.ps1
Run mine.ps1 to get rolling

References

vega.miningguides.com
Geek Mark's Video: https://www.youtube.com/watch?v=wUrt7DgSiDM&t=3s
The rest of the beautiful internet

Contributing

Open a PR!

Authors

Wylie Hobbs

hobbsh / auto_xmr