ansible-openwisp2

Ansible role that installs the openwisp2 controller.

Tested on debian, ubuntu, fedora, redhat and centos.

NOTE: it is highly suggested to use this procedure on clean virtual machines or linux containers.

Minimum ansible version supported: 2.4.

Help OpenWISP

Like OpenWISP? Find out how to help us!

Architecture

If you are fond of Python, Django and Unix/Linux systems, you may find interesting to know more about what happens under the hood in OpenWISP 2.

For more information see also Applying the Unix Philosophy to Django projects: a report from the real world.

Usage (tutorial)

If you don't know how to use ansible, don't panic, this procedure will guide you towards a fully working basic openwisp2 installation.

If you already know how to use ansible, you can skip this tutorial.

First of all you need to understand two key concepts:

for "production server" we mean a server (not a laptop or a desktop computer!) with public ipv4 / ipv6 which is used to host openwisp2
for "local machine" we mean the host from which you launch ansible, eg: your own laptop

Ansible is a configuration management tool that works by entering production servers via SSH, so you need to install it and configure it on the machine where you launch the deployment and this machine must be able to SSH into the production server.

Ansible will be run on your local machine and from there it will connect to the production server to install openwisp2.

If you are trying to install OpenWISP2 on your laptop or desktop pc just for testing purposes, please read Install OpenWISP2 for testing in a VirtualBox VM.

Install ansible

Install ansible (version 2.4 or higher) on your local machine (not the production server!) if you haven't done already.

To install ansible we suggest you follow the official ansible installation guide.

After having installed ansible, you need to install git (example for linux debian/ubuntu systems):

sudo apt-get install git

Install this role

For the sake of simplicity, the easiest thing is to install this role on your local machine via ansible-galaxy (which was installed when installing ansible), therefore run:

ansible-galaxy install openwisp.openwisp2

Choose a working directory

Choose a working directory on your local machine where to put the configuration of openwisp2.

This will be useful when you will need to upgrade openwisp2.

Eg:

mkdir ~/openwisp2-ansible-playbook
cd ~/openwisp2-ansible-playbook

Putting this working directory under version control is also a very good idea.

Create inventory file

The inventory file is where group of servers are defined. In our simple case we can get away with defining just one group in which we will put just one server.

Create a new file called hosts in your local machine's working directory (the directory just created in the previous step), with the following contents:

[openwisp2]
openwisp2.mydomain.com

Substitute openwisp2.mydomain.com with your production server's hostname - DO NOT REPLACE openwisp2.mydomain.com WITH AN IP ADDRESS, otherwise email sending through postfix will break, causing 500 internal server errors on some operations.

Create playbook file

Create a new playbook file playbook.yml on your local machine with the following contents:

- hosts: openwisp2
  become: "{{ become | default('yes') }}"
  roles:
    - openwisp.openwisp2
  vars:
    openwisp2_default_from_email: "openwisp2@openwisp2.mydomain.com"

The line become: "{{ become | default('yes') }}" means ansible will use the sudo program to run each command. You may remove this line if you don't need it (eg: if you are using the root user on the production server).

You may replace openwisp2 on the hosts field with your production server's hostname if you desire.

Substitute openwisp2@openwisp2.mydomain.com with what you deem most appropriate as default sender for emails sent by OpenWISP 2.

Run the playbook

Now is time to deploy openwisp2 to the production server.

Run the playbook from your local machine with:

ansible-playbook -i hosts playbook.yml -u <user> -k --become -K

Substitute <user> with your production server's username.

The -k argument will need the sshpass program.

You can remove -k, --become and -K if your public SSH key is installed on the server.

Tips:

If you have an error like Authentication or permission failure then try to use root user ansible-playbook -i hosts playbook.yml -u root -k
If you have an error about adding the host's fingerprint to the known_hosts file, you can simply connect to the host via SSH and answer yes when prompted; then you can run ansible-playbook again.

When the playbook is done running, if you got no errors you can login at:

https://openwisp2.mydomain.com/admin
username: admin
password: admin

Substitute openwisp2.mydomain.com with your production server's hostname.

Now proceed with the following steps:

change the password (and the username if you like) of the superuser as soon as possible
edit the information of the default organization
in the default organization you just updated, note down the automatically generated shared secret option, you will need it to use the auto-registration feature of openwisp-config

Now you are ready to start configuring your network! If you need help you can ask questions on one of the official OpenWISP Support Channels.

Install OpenWISP2 for testing in a VirtualBox VM

If you want to try out OpenWISP 2 in your own development environment, the safest way is to use a VirtualBox Virtual Machine (from here on VM).

Installing Debian 9 on VirtualBox

Install VirtualBox and create a new Virtual Machine running Debian 9. A step-by-step guide is available here, however we need to change a few things to get ansible working.

VM configuration

Proceed with the installation as shown in the guide linked above, and come back here when you see this screen:

We're only running this as a server, so you can uncheck Debian desktop environment. Make sure SSH server and standard system utilities are checked.

Next, add a Host-only Network Adapter and assign an IP address to the VM.

Go to File > Preferences > Network > Host-only Networks
Click the + icon to create a new adapter
Set the IPv4 address to 192.168.56.1 and the IPv4 Network Mask to 255.255.255.0. The IPv6 settings can be ignored
Shut off your VM
In your VM settings, in the Network section, click Adapter 2
Select Host-only adapter and the name of the adapter you created
Boot up your VM, run su, and type in your superuser password
Run ls /sys/class/net and take note of the output
Run nano /etc/network/interfaces and add the following at the end of the file:
```
  auto enp0s8
  iface enp0s8 inet static
      address 192.168.56.2
      netmask 255.255.255.0
      network 192.168.56.0
      broadcast 192.168.56.255
```
Replace enp0s8 with the network interface not present in the file but is shown when running ls /sys/class/net
Save the file with CtrlO then Enter, and exit with CtrlX
Restart the machine by running reboot

Make sure you can access your VM via ssh:

ssh 192.168.56.2

Back to your local machine

Proceed with these steps in your local machine, not the VM.

Step 1: Install ansible

Step 2: Install the OpenWISP2 role for Ansible

Step 3: Set up a working directory

Step 4: Create the hosts file

Create an ansible inventory file named hosts in your working directory (i.e. not in the VM) with the following contents:

[openwisp2]
192.168.56.2

Step 5: Create the ansible playbook

In the same directory where you created the host file, create an empty file named playbook.yml which contains the following:

- hosts: openwisp2
  roles:
    - openwisp.openwisp2
  # the following line is needed only when an IP address is used as the inventory hostname
  vars:
      postfix_myhostname: localhost

Step 6: Run the playbook

ansible-playbook -i hosts playbook.yml -b -k -K --become-method=su

When the playbook ran successfully, you can log in at:

https://192.168.56.2/admin
username: admin
password: admin

Enabling the network topology module

To enable the network topology module you need to set openwisp2_network_topology to true in your playbook.yml file. Here's a short summary of how to do this:

Step 1: Install ansible

Step 2: Install this role

Step 3: Create inventory file

Step 4: Create a playbook file with following contents:

- hosts: openwisp2
  become: "{{ become | default('yes') }}"
  roles:
    - openwisp.openwisp2
  vars:
    openwisp2_network_topology: true

Step 5: Run the playbook

When the playbook is done running, if you got no errors you can login at:

https://openwisp2.mydomain.com/admin
username: admin
password: admin

SSL certificate gotchas

When you access the admin website you will get an SSL certificate warning because the playbook creates a self-signed (untrusted) SSL certificate. You can get rid of the warning by installing your own trusted certificate and set the openwisp2_ssl_cert and openwisp2_ssl_key variables accordingly or by following the instructions explained in the section "Automatic SSL certificate".

If you keep the untrusted certificate, you will also need to disable SSL verification on devices using openwisp-config by setting verify_ssl to 0, although I advice against using this kind of setup in a production environment.

Automatic SSL certificate

This section explains how to automatically install and renew a valid SSL certificate signed by letsencrypt.

The first thing you have to do is to setup a valid domain for your openwisp2 instance, this means your inventory file (hosts) should look like the following:

[openwisp2]
openwisp2.yourdomain.com

You must be able to add a DNS record for openwisp2.yourdomain.com, you cannot use an ip address in place of openwisp2.yourdomain.com.

Once your domain is set up and the DNS record is propagated, proceed by installing the ansible role thefinn93.letsencrypt:

sudo ansible-galaxy install thefinn93.letsencrypt

Then proceed to edit your playbook.yml so that it will look similar to the following example:

- hosts: openwisp2
  become: "{{ become | default('yes') }}"
  roles:
    - thefinn93.letsencrypt
    - openwisp.openwisp2
  vars:
    # SSL certificates
    openwisp2_ssl_cert: "/etc/letsencrypt/live/{{ ansible_fqdn }}/fullchain.pem"
    openwisp2_ssl_key: "/etc/letsencrypt/live/{{ ansible_fqdn }}/privkey.pem"
    # letsencrypt configuration
    letsencrypt_webroot_path: "{{ openwisp2_path }}/public_html"
    letsencrypt_email: <YOUR_EMAIL_HERE>
    letsencrypt_renewal_command_args: '--renew-hook "service nginx restart"'
    letsencrypt_renewal_frequency:
      day: "*"
      hour: "7,19"  # renewal cronjob runs at 7 AM and at 7 PM
      minute: 0

Fill a real email address in place of <YOUR_EMAIL_HERE>, it may be used by letsencrypt to send you important communications regarding your SSL certificate.

Once you have set up all the variables correctly, run the playbook again.

Upgrading openwisp2

Update this ansible-role via ansible-galaxy:

sudo ansible-galaxy install --force openwisp.openwisp2

Run ansible-playbook again from your local machine:

ansible-playbook -i hosts playbook.yml

You may also run the playbook automatically periodically or when a new release of OpenWISP2, for example, by setting up a continuous integration system.

Role variables

This role has many variables values that can be changed to best suit your needs.

Below are listed all the variables you can customize (you may also want to take a look at the default values of these variables).

- hosts: yourhost
  roles:
  # you can add other roles here
    - openwisp.openwisp2
  vars:
    # optional openwisp2 modules
    openwisp2_network_topology: false
    # you may replace the values of these variables with any URL
    # supported by pip (the python package installer)
    # use these to install forks, branches or development versions
    # WARNING: only do this if you know what you are doing; disruption
    # of service is very likely to occur during development
    openwisp2_controller_pip: false
    openwisp2_users_pip: false
    openwisp2_django_netjsonconfig_pip: false
    openwisp2_django_x509_pip: false
    openwisp2_netjsonconfig_pip: false
    openwisp2_network_topology_pip: false
    openwisp2_django_netjsongraph_pip: false
    # by default python3 is used, if may need to set this to python2.7 for older systems
    openwisp2_python: python2.7
    # customize the app_path
    openwisp2_path: /opt/openwisp2
    # It is recommended that you change the value of this variable if you intend to use
    # OpenWISP2 in production, as a misconfiguration may result in emails not being sent
    openwisp2_default_from_email: "openwisp2@yourhostname.com"
    # edit database settings only if you are not using sqlite
    openwisp2_database:
        engine: django.db.backends.postgresql
        name: openwisp2
        user: postgres
        password: ""
        host: ""
        port: ""
        options: {}
    # SPATIALITE_LIBRARY_PATH django setting
    openwisp2_spatialite_path: "mod_spatialite"
    # customize other django settings:
    openwisp2_language_code: en-gb
    openwisp2_time_zone: UTC
    # django-netjsonconfig context
    openwisp2_context: {}
    # additional allowed hosts
    openwisp2_allowed_hosts:
        - myadditionalhost.openwisp.org
    # geographic map settings
    openwisp2_leaflet_config:
        DEFAULT_CENTER: [42.06775, 12.62011]
        DEFAULT_ZOOM: 6
    # specify path to a valid SSL certificate and key
    # (a self-signed SSL cert will be generated if omitted)
    openwisp2_ssl_cert: "/etc/nginx/ssl/server.crt"
    openwisp2_ssl_key: "/etc/nginx/ssl/server.key"
    # customize the self-signed SSL certificate info if needed
    openwisp2_ssl_country: "US"
    openwisp2_ssl_state: "California"
    openwisp2_ssl_locality: "San Francisco"
    openwisp2_ssl_organization: "IT dep."
    # the following setting controls which ip address range
    # is allowed to access the controller via unencrypted HTTP
    # (this feature is disabled by default)
    openwisp2_http_allowed_ip: "10.8.0.0/16"
    # additional python packages that will be installed with pip
    openwisp2_extra_python_packages:
        - bpython
        - django-owm-legacy
    # additional django apps that will be added to settings.INSTALLED_APPS
    # (if the app needs to be installed, the name its python package
    # must be also added to the openwisp2_extra_python_packages var)
    openwisp2_extra_django_apps:
        - owm_legacy
    # additional django settings example
    openwisp2_extra_django_settings:
        - CSRF_COOKIE_AGE: 2620800.0
    # in case you need to add python instructions to the django settings file
    openwisp2_extra_django_settings_instructions:
        - TEMPLATES[0]['OPTIONS']['loaders'].insert(0, 'apptemplates.Loader')
    # extra URL settings for django
    openwisp2_extra_urls:
      - "url(r'', include('my_custom_app.urls'))"
    # spdy protocol support (disabled by default)
    openwisp2_nginx_spdy: false
    # HTTP2 protocol support (disabled by default)
    openwisp2_nginx_http2: false
    # ipv6 must be enabled explicitly to avoid errors
    openwisp2_nginx_ipv6: false
    # dictionary containing more nginx settings for
    # the 443 section of the openwisp2 nginx configuration
    # IMPORTANT: 1. you can add more nginx settings in this dictionary
    #            2. here we list the default values used
    openwisp2_nginx_ssl_config:
        gzip: "on"
        gzip_comp_level: "6"
        gzip_proxied: "any"
        gzip_min_length: "1000"
        gzip_types:
            - "text/plain"
            - "text/html"
            - "image/svg+xml"
            - "application/json"
            - "application/javascript"
            - "text/xml"
            - "text/css"
            - "application/xml"
            - "application/x-font-ttf"
            - "font/opentype"
    # the following setting controls which ip address range
    # is allowed to access the openwisp2 admin web interface
    # (by default any IP is allowed)
    openwisp2_admin_allowed_network: null
    # install ntp client (enabled by default)
    openwisp2_install_ntp: true
    # enable sentry example
    openwisp2_sentry:
        dsn: "https://7d2e3cd61acc32eca1fb2a390f7b55e1:bf82aab5ddn4422688e34a486c7426e3@getsentry.com:443/12345"
    openwisp2_default_cert_validity: 1825
    openwisp2_default_ca_validity: 3650
    # redis cache url
    openwisp2_redis_cache_url: redis://127.0.0.1:6379/1
    # allow overriding default `postfix_smtp_sasl_auth_enable` variable
    postfix_smtp_sasl_auth_enable_override: yes

Support

See OpenWISP Support Channels.

hispanico / ansible-openwisp2